BenQ Pb6200/pb6100 Digital Projector Users Manual

Operation 17
Blank
Use Blank to hide the screen image. You can 
unseal the image gradually by using the 
mouse of the remote control, or simply press 
Blank to turn the image on immediately. 

Operation 18
Menu System
Press Menu for the main menu, and then press 3or 4 to select a sub-menu. Press Menu 
again to select items in the sub-menu.
Functions available when connecting to different equipment...
Sub-Menu PC Y/Pb/Pr S-Video / Video
 Display
Keystone
Brightness
Contrast
Phase
H SizeKe ystone
Brightness
Contrast
Color
Tint
 Image
Aspect Ratio
H Position
V Position
Color Temp
InformationAspect Ratio
Color
Tint
Color TempAspect Ratio
System
Sharpness
Color Temp
Information
 Source
Mirror...

Operation 19
1. Display Menu    
FUNCTIONDESCRIPTION
KeystoneCorrects any keystoning of the image. 
BrightnessAdjusts the brightness of the image.  
ContrastAdjusts the degree of difference between dark and light in the image.   
PhaseAdjusts to avoid the occurrence of flicker.
This function is not available when the input mode is Video or S-
Video. 
H SizeAdjusts to fit in the desired image size. 
This function is not available when the input mode is Video or S-
Video.
Color Increases or decreases the...

Operation 20
2. Image Menu   
FUNCTIONDESCRIPTION
Aspect RatioMakes the best fit of the image to the screen,
1. 4 : 3     2. 16 : 9      3. Native
“Native” is available only when the input mode is PC .
H PositionAdjusts the horizontal position of the projected image. 
 
This function is available only when the input mode is PC.
V PositionAdjusts the vertical positon of the projected image. 
This function is available only when the input mode is PC.
Color TempAdjusts the color temperature to fit your...

Operation 21
3. Source Menu  
FUNCTIONDESCRIPTION
Mirror
Source
Shows the selected input source among PC, YPbPr, S-Video and Video 
when they are available.
Source ScanIf selecting ON, the function is activated and the projector starts to scan in 
order of PC, YPbPr, S-Video and Video when there is no signal detected. If 
selection OFF, the projector only detects the last input source.
Blank TimeDetermines the length of time before the projector is shut off when Blank 
is activated. 
Auto OffSets the...

Operation 22
4. Control Menu
FUNCTIONDESCRIPTION
LanguageLanguage sets the language for the OSD control menus.
Use the 3 / 4 key to select the desired language from among English, 
French, German, Italian, Spanish, Korean, Traditional Chinese and 
Simplified Chinese. 
OSD Pos.Selects a desired OSD position.
OSD TimeSets the length of time the OSD will remain active after the last time you 
pressed the  button. The range is from 5 to 60 seconds in 5-second 
increments.
Preset ModeTo optimize the projected...

Operation 23
5. PIP Menu
These functions are available only when the input mode is PC and the PIP source is Video or 
S-Video.  
FUNCTIONDESCRIPTION
PIP SourceSelects the source for the PIP.
PIP SizeEnables use of the 3 / 4 key to scroll through the four alternatives: Off, 
Small, Medium, Large. 
PIP PositionSelects a desired position for the PIP.  
H PositionAdjusts the horizontal position of the PIP image. 
V PositionAdjusts the vertical position of the PIP image.
More OptionsEnables use of the 3 / 4...

Operation 24
Shutdown
1. Press and hold POWER and a warning message will appear. To turn the projector off, 
press and hold POWER again.
2. The fan will continue to run for approximately 110 seconds.
3. Turn the main power switch off. 
4. Disconnect the power cord from the wall socket.
Do not unplug the power cord before POWER is shut down or during the 110-second cooling
process.
If the projector is not properly shut down, to protect the lamp, the system will detect this and
cool the lamp for 110...

Maintenance 25
Maintenance
Lamp Information
Use and Replacement of the Lamp
When the Lamp Indicator lights up red or a message appears suggesting the time of lamp 
replacement, please install a new lamp or consult your dealer. An old lamp could cause a 
malfunction in the projector and in rare instances may even break.
For more detailed information, please refer to LED Indicator Status & Illustration on page 
28.
The Lamp and Temp indicators will light up if the lamp becomes too hot. Turn the power off...

Maintenance 26Step 1. Turn the projector off. Discon-
nect the power cord from the 
outlet and the projector.
Step 2. Loosen the screw and remove the 
lamp cover. (It is strongly rec-
ommended that you use a mag-
netic-head screwdriver.) If the 
lamp is hot, avoid burns by wait-
ing 45 minutes until the lamp 
has cooled. 
Step 3. Loosen the 3 screws. Pull the han-
dle to remove the lamp housing. 
If the screws are not loosened 
completely, they could injure 
your fingers. Do not insert your 
hand into...