BenQ Pb6200/pb6100 Digital Projector Users Manual

							Maintenance 27
Resetting Lamp Hours
If you replace the lamp with a new one, please follow the instructions below to reset the 
lamp hour.   
Te m p  I n f o r m a t i o n
When the LED lights up, it is warning you of the following possible problems:
1. The internal temperature is too high.
2. The fans are not working.
Turn the projector off and contact qualified service personnel for further help.
For more detailed information, please refer to LED Indicator Status & Illustration on page 
28.
OSDINSTRUCTIONS
Press and hold the Exit button on the projector for 3 
seconds to display the total used lamp time. With the 
OSD on, press MENU to activate RESET function or 
press EXIT to leave.
Press W or X to reset the lamp hour to zero or or press 
EXIT to leave.
This message displays when the lamp hour is reset to 
zero. You can press EXIT to leave. 
						

							Maintenance 28
LED Indicator Status & Illustration
llustration
1.- : LED OFF
2.  : LED blinking
3.  : LED solid ON
4.
O : LED lights up orange.
5.
R : LED lights up red.
6.
G : LED lights up green.   
LED Status & Description
Power Temp Lamp
Power e vents
Power sw itch on 
--
Power-up cooling. Projector cooling system will auto-cool for 
110 seconds when power was abnormally shutdown without 
cooling and power on again within hours.
--
Stand-by
--
Lamp LED is blinking during powering up.
--
Power-down cooling for 110 seconds after power has been 
turned off.
--Normal operation
Lamp events
--
Lamp spoil, it is warning you that lamp usage has exceeded 
3000 hours. Replace the projection lamp with a new one 
immediately.
--Lamp error, the lamp is not properly attached or lamp 
damaged. Please contact your dealer.
  
  
O OO
O 
O 
 G 
 O 
 G 
 R
 R 
						

							Maintenance 29
Thermal events
-
Fan 1 error, projector will auto shutdown. If you return on the 
power, and projector shutdown again. Please contact your 
dealer.
Fan 2 error, projector will auto shutdown. If you return on the 
power, and projector shutdown again. Please contact your 
dealer.
Fan 3 error, projector will auto shutdown. If you return on the 
power, and projector shutdown again. Please contact your 
dealer.
-
Thermal sensor 1 over-temperature, projector will auto 
shutdown. If you return on the power, and projector 
shutdown again. Please contact your dealer.
Thermal sensor 2 over-temperature, projector will auto 
shutdown. If you return on the power, and projector 
shutdown again. Please contact your dealer.
Thermal sensor 3 over-temperature, projector will auto 
shutdown. If you return on the power, and projector 
shutdown again. Please contact your dealer.
--Thermal sensor 1 doesn’t work, projector will auto shutdown. 
If you return on the power, and projector shutdown again. 
Please contact your dealer.
-
Thermal sensor 2 doesn’t work, projector will auto shutdown. 
If you return on the power, and projector shutdown again. 
Please contact your dealer.
-Thermal sensor 3 doesn’t work, projector will auto shutdown. 
If you return on the power, and projector shutdown again. 
Please contact your dealer.
 R  R
 R  R G
 R  R G
 G  R
 G  R G
 G  R G
 R
 R G
 R G 
						

							Maintenance 30
Service Information
Accessories (included in the standard package) 
Alternative Accessories (vary from country to country)
Optional Accessories (not included in the standard package)
Ordering Parts or Getting Information
For product information, product assistance, service information, or to order accessories, 
please visit the BENQ Corporation website at http://www.BenQ.com. Description of parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Part Number
VGA cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J0508.503
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J1303.501
S-Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   50.72920.011
Remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56.26J86.001
Description of parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Part Number
Power cord (US)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.01818.000
3-2 converter (US). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   22.91007.001
Power cord (EU)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.82718.281
Power cord (UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   27.01018.000
Description of parts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Part number 
Mac adapter (switchable)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.20118.A15
200W lamp module   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60.J8618.CG1
Ceiling mount kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60.J7683.001
Soft carry case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.J7601.001
HDTV cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J2401.001 
						

							Troubleshooting 31
Troubleshooting
Common Problems & Solutions
NO POWER
Try these solutions: 
• Make sure the power cord is inserted snugged into the AC adapter socket.
• Make sure the power cord is inserted snugged into the power outlet.
• Toggle the power switch to the position “
|”.
• Wait 110 seconds after the projector is turned off before turning the projector back on.
NO PICTURE
Try these solutions: 
• Check for the proper input source.
• Ensure all cables are connected properly.
• Adjust the brightness and contrast. 
• Remove the lens cap.
TRAPEZOID IMAGE ON THE SCREEN
Try these solutions: 
• Reposition the unit to improve its angle on the screen.
•Use the Keystone correction key on the control panel of the projector or the remote 
control unit.
POOR COLOR
Try these solutions: 
• Select the correct video system.
• Adjust brightness, contrast, or saturation.
BLURRED IMAGE 
Try these solutions: 
• Press Auto on the control panel of the projector or the remote control unit to get better 
picture quality.
•Adjust the focus. 
• Reposition the unit to improve its projection angle.
• Ensure the distance between the unit and screen is within the adjustment range of the 
lens.
REMOTE CONTROL DOES NOT WORK
Try these solutions: 
• Replace the batteries with new ones.
• Make sure there is no obstacle between the remote control and the projector.
• Stand within 6 meters (19.5 feet) of the projector.
• Make sure nothing is blocking the front and rear receivers. 
						

							Troubleshooting 32
Status Messages    
On-Screen MessagesDescription
SEARCHINGProjector is searching for input.
ACQUIRING SIGNALProjector has identified the input signal and is 
running the auto image adjustment function.
OUT OF RANGEInput signal frequency exceeds the projector’s range.
Lamp Warning - Change 
Lamp If Brightness Is Low.The lamp has been in operation for over 1980 hours. 
Install a new lamp for optimal performance. This 
message will display for 10 seconds after starting up 
the projector.
Out Of Lamp Usage Time - 
Change The Lamp! The 
Power Will Turn Off After 
3000 Hours.The lamp has been in operation for over 2980 hours, 
and the power will turn off after 3000 hours. This 
message will display for 30 seconds after starting up 
the projector.
Out Of Lamp Usage Time -  
Change The Lamp! Press 
 to enable 
The lamp has been in operation for over 3000 hours. 
The warning message will display for 40 seconds and 
then shut down automatically. If you have installed a 
new lamp, press  during the OSD on to 
enter for resetting the lamp hour to zero. 
						

							Specifications 33
Specifications
Projector Specifications 
Technical Specifications
All specifications are subject to change without notice. 
General
Product name Digital Projector
Model name PB6200         1024X768  XGA
PB6100         800X600  SVGA
Optical
Display system 1-CHIP DMD
Lens F/Number F = 2.4 to 2.6, f = 24.3 ~ 29.2 mm
Lamp 200W lamp
Electrical
Power supply AC100 ~ 240V, 3.2A, 50/60 Hz (Automatic)
Power consumption 285W (Max)
Mechanical
Dimensions 262 mm (W) x 98.4 mm (H) x 215.5 mm (D)
Operating temperature 
range0°C ~ 40°C
Weight 5.8 lbs (2.6 Kg)
Input terminal
Computer input
     RGB input D-sub 15-pin (female)
Video signal input
     S-VIDEO Mini DIN 4-pin port x1
     VIDEO RCA jack x1 
						

							Specifications 34
Timing Chart 
Resolution H Sync (kHz) V Sync (Hz) Remark
640x350 31.5 70.1
640x400 37.9 85.1 VESA
720x400 31.5 70.0
720x400 37.9 85.1 VESA
640x480 31.5 60.0 VESA
640x480 37.9 72.8 VESA
640x480 35 66.7 Macintosh
640x480 43.3 85.0 VESA
800x600 35.2 56.3 VESA
800x600 37.9 60.3 VESA
800x600 46.9 75.0 VESA
800x600 48.1 72.2 VESA
800x600 53.7 85.1 VESA
832x624 49.7 74.5 Macintosh
1024x768 48.4 60.0 VESA
1024x768 56.5 70.1 VESA
1024x768 60.0 75.0 VESA
1024x768 68.7 85.0 VESA
1280x1024 64.0 60.0 VESA 
						

							Dimensions 35
Dimensions
Unit: mm
262
215.5
98.4 
						

							Warranty 36
Warranty
Limited Warranty
BENQ warrants this product against any defects in material and workmanship, under nor-
mal usage and storage. 
Exclusion to Warranty: The lamps are considered as consumable items and are warranted 
for 90 days or 1000 hours, whichever occurs first. Proof of purchase date will be required 
with any warranty claim. In the event this product is found to be defective within the war-
ranty period, BENQ’s only obligation and your exclusive remedy shall be replacement of any 
defective parts (labor included). To obtain warranty service, immediately notify the dealer 
from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the product in 
accordance with BENQ’s written instructions. This warranty gives you specific legal rights, 
and you may have other rights which vary from country to country.
For other information, please refer to BenQ Warranty Information Book.