Barco Hdx Series Installation Manual

9. Image
9.6.7 Copy customfile
How to copy
1. PressMenuto activate the menus and selectImage→Image File Services→Copy.
Image 9-75
Main menu, Image
Image 9-76
Image, imagefile services
Image 9-77
Imagefile services, copy
2. PressENTERto select.
The available customfiles are displayed.
Image 9-78
Copyfiles, list
If no customfiles are available, a message that no customfiles are available is displayed.
R5905032 HDX SERIES 23/11/2011
147 

9. Image
Image 9-79
No customfiles
3. Use the▲or▼key to select thefile to copy and pressENTER.
The copy window opens.
Image 9-80
Copy customfiles
4. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically. Arrow key left (◄) has the backspace functionality.
148
R5905032 HDX SERIES 23/11/2011 

9. Image
9.6.8 Imagefile service options, Loadfile
How to set
1. PressMenuto activate the menus and selectImage→Image File Services→Options→Load File.
Image 9-81
Main menu, Image
Image 9-82
Image, imagefile services
Image 9-83
Imagefile services, Options
Image 9-84
File options, Loadfile
2. PressENTERto toggle between[Automatic],[Manual]or[Custom only].
- Automatic : correctfile will be loaded automatically.
- Manual : correctfile should be loaded manually.
- Custom only : correctfile will be loaded...

9. Image
9.6.9 Imagefile service options, Auto Picture Alignment
How to set
1. PressMenuto activate the menus and selectImage→Image File Services→Options→Auto Picture Alignment.
Image 9-85
Main menu, Image
Image 9-86
Image, imagefile services
Image 9-87
Imagefile services, Options
Image 9-88
File options, Auto Picture Alignment
2. PressENTERto toggle between[Off],[Always]or[Load File].
- Off : auto picture alignment deactivated.
- Always : auto picture alignment is always activated.
- Loadfile: when newfile...

9. Image
9.7 Save custom settings
What can be done ?
The current custom settings can be saved to internal backup device in the same way as it would be done when the projector lamp
was switched off.
When settings are changed when the lamp is off, a manual Save custom settings must be executed to save the changes.
When the message Save changes is displayed, newer switch off the projector.
How to save
1. PressMenuto activate the menus and selectImage→Save Custom Settings
Image 9-89
Main menu, Image
Image...

9. Image
152R5905032 HDX SERIES 23/11/2011 

10. Layout
10. LAYOUT
Overview
• Layout menu overview
• Introduction
• Main window
• PiP window
• Layout File Services
• Zoom - Focus - Shift windows
R5905032 HDX SERIES 23/11/2011
153 

10. Layout
10.1 Layout menu overview
Overview table
Level 1 Level 2 Level 3 Level 4
Layout
Main Window
Source
Size
Position
Pip Window
Pip Window [On], [Off]
Source
Size
Position
Layout File ServicesLoad
Main Full Screen
Native Resolution
PipUpRight
SplitLeftRight
Split Top Bottom
Custom x
Rename
Delete
Delete all
Copy/Save as
Zoom/Focus/Shift Same zoom/focus/shift [yes],
[no]
154
R5905032 HDX SERIES 23/11/2011 

10. Layout
10.2 Introduction
Overview
Layoutfiles determine the size and the position of the main and PiP window on the screen. Some pre-defined layouts are available
in the projector but custom layouts can be created and saved for future use. A source number and lens settings can be associated
with the layout settings.
R5905032 HDX SERIES 23/11/2011
155 

10. Layout
10.3 Main window
Overview
• Main window source selection
• Main window size
• Main window position
When starting the Main window settings, the system will ask to create a custom layout
156R5905032 HDX SERIES 23/11/2011