Barco Hdx Series Installation Manual

8. Input
Image 8-15
Main window
Image 8-16
Input, native resolution
R5905032 HDX SERIES 23/11/2011107 

8. Input
8.5 No Signal
Overview
• Background color
• Background Logo
• Shutdown settings
• Shutdown retarding time
• Auto Dimming
Whatcanhappenwhennosignal
When no signal is available at the selected input, the output can be set to blue or black or a personal defined logo can be displayed
or the projector can shutdown after a certain time or auto dimming can be started.
108
R5905032 HDX SERIES 23/11/2011 

8. Input
8.5.1 Background color
How to set the background color
1. PressMenuto activate the menus and selectInput→No Signal.→Color.
2. PressENTERto toggle between[Blue]or[black].
Image 8-17
Main window
Image 8-18
Input, no signal
Image 8-19
No signal, color
R5905032 HDX SERIES 23/11/2011109 

8. Input
8.5.2 Background Logo
What can be done ?
A logo can be switched on or off.
When logo is switched on and a logo is available, that logo will bedisplayed when no signal is available for the main window an no
signal available for the PiP window in case PiP is On..
How to activate logo
1. PressMenuto activate the menus and selectInput→No Signal.→Logo.
2. PressENTERto toggle between[On]or[Off].
Image 8-20
Main window
Image 8-21
Input, no signal
Image 8-22
No signal, logo
A dedicated logo can be...

8. Input
8.5.3 Shutdown settings
How to change the settings
1. PressMenuto activate the menus and selectInput→No Signal.→Shutdown.
Image 8-23
Main window
Image 8-24
Input, no signal
Image 8-25
No signal, shutdown
2. PressENTERto toggle between[On]and[Off].
[On]: projector goes in shutdown after a certain retarding time.
[Off]: projector does not go in shutdown.
R5905032 HDX SERIES 23/11/2011
111 

8. Input
8.5.4 Shutdown retarding time
About the shutdown retarding time
The retarding time is the time between no signal is detected and the moment that the projector shuts down.
How to set the retarding time
1. PressMenuto activate the menus and selectInput→No Signal.→Shutdown time (min).
Image 8-26
Main window
Image 8-27
Input, no signal
Image 8-28
2. PressENTERto toggle between[1],[3],[5]and[10]minutes.
112
R5905032 HDX SERIES 23/11/2011 

8. Input
8.5.5 Auto Dimming
About auto dimming
When no signal is detected on the selected input the lamp power will be reduced from the current value to its minimum value. When
the input signal is re-detected, the lamp power is restored to its original value.
How to set up
1. PressMenuto activate the menus and selectInput→No Signal.→Auto Dimming.
Image 8-29
Main window
Image 8-30
Input, no signal
Image 8-31
No signal, auto dimming
2. PressENTERto toggle between[On]or[Off].
[On] : when no signal, auto...

8. Input
114R5905032 HDX SERIES 23/11/2011 

9. Image
9. IMAGE
Overview
• Image menu overview
• Start up the Image adjustments
• Image settings
• Aspect Ratio
•Timings
• Image File Services
• Save custom settings
R5905032 HDX SERIES 23/11/2011
115 

9. Image
9.1 Image menu overview
Overview table
Level 1 Level 2 Level 3 Level 4
Image
Image settings
Contrast
Brightness
Saturation
Tint
Phase
Sharpness
Color TemperatureProjector white
Computer 9300
Video 6500
Film 5400
Broadcast 3200
Customr Balance
Input Balance Black Balance
White Balance
Aspect ratio 4:3
16:9
5:4
2.35
1.88
1.85
1.78
1.67
16:10
Custom
Timings Horizontal Total Pixels
Active pixels
Horizontal start
Period
Total vertical lines
Active lines
Vertical start
Advanced settings Clamp delay...