Bang & Olufsen Beovision 7 40 55 Television User Manual

							61
You must set up your television 
to be operated with a remote control with or without a 
navigation button. 
Even though your remote control  has a navigation button, you can choose to set your television up 
for operation without navigation  button. This can be useful if you 
have a BeoLink system also  comprising a television without 
the REMOTE CONTROL menu. 
If you set up your television for operation without a navigation 
button and your Beo4 has a 
navigation button, you must also  change the MODE setting of 
your Beo4. See the Beo4 Guide  or contact your retailer for 
further information. 
Set up your remote control 
In the REMOTE CONTROL menu you set 
up whether the Beo4 remote control you 
are using has a navigation button or not. 
To make remote control settings …  >  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu, and highlight REMOTE 
CONTROL. 
>  Press the centre button to bring up the 
REMOTE CONTROL menu. 
>  Use the navigation button up and down to 
highlight the setting you want. 
>  Press the centre button to store the 
setting. 
>  Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus. 
For information about menu operation with 
the different types of remote controls, see  page 6 . 
Remote control settings 
REMOTE CONTROL 
NAVIGATION BUT TON
NO NAVIGATION BUT TON 
						

							62
Additional features in your 
television can be made accessible  via the FEATURE ACTIVATION  menu. For information about 
additional features, contact your  Bang & Olufsen retailer. 
Feature activation 
In order for additional features to 
become available, a feature activation 
key must be entered. The feature key can be purchased from your Bang & 
Olufsen retailer. The key cannot be  deactivated again. 
To enter an activation key …  >  Bring up the T V SETUP menu and 
highlight OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight FEATURE 
ACTIVATION. 
>  Press the centre button to bring up the 
FEATURE ACTIVATION menu. 
>  Select the feature, you wish to activate 
and press the centre button. 
>  Enter the 12 digit key. An incorrect 
number can be deleted by pressing the 
navigation button left, all numbers can be deleted by pressing BACK . 
>  When the numbers are entered, press the 
centre button to accept. 
Feature activation key 
HDMI MATRIX
KEY  . . . . -  . . . . -  . . . . 
						

							63
The HDMI MATRIX feature is an 
additional feature which can be purchased separately. When the 
purchased feature activation key 
is entered, additional software  becomes available in your 
television. The HDMI Matrix itself  is a physical product that can be connected allowing you to 
connect several external sources 
to your television and access 
them via the Beo6 remote  control. For information about 
additional features, contact your  Bang & Olufsen retailer. 
HDMI MATRIX 
The HDMI MATRIX must be connected  and set up by your Bang & Olufsen retailer. 
–  Your Beo6 remote control must be 
reconfigured before you can use the 
HDMI Matrix. 
–  You cannot operate the HDMI Matrix with 
a Beo4 remote control. 
–  You cannot connect more than one HDMI 
Matrix in a setup. 
–  The HDMI Matrix cannot be configured on 
an HDMI Expander. 
–  You cannot configure both the HDMI 
Matrix and a source centre. 
Settings in the HDMI MATRIX menu … In the HDMI MATRIX menu, you can select 
settings for your HDMI Matrix. 
In the CONNECTIONS menu … 
>  Select the socket group to which you have 
connected a HDMI Matrix. 
>  Select the HDMI MATRIX field and set it 
to YES. 
>  The field INPUTS appears and you can 
specify the number of sources you want 
to connect. Set the field to a higher  number of sources than you have 
connected. 
>  Select an HDMI socket. You cannot select 
NONE. 
>  Press the centre button to store the 
settings and bring up the HDMI MATRIX menu. 
>  Select the connected HDMI Matrix type. 
>  Press the centre button to store the 
settings and bring up the CONTROL menu. 
>  Select an IR type to indicate how the T V 
control is connected to the HDMI Matrix. 
>  Press the centre button to store the 
settings. 
When you have stored the settings for the  HDMI Matrix, an input list menu appears for you to configure the sources connected to 
the matrix, see page 64 .  If you at a later time disable a stored HDMI 
Matrix configuration by setting the HDMI 
MATRIX field to NO, your settings are still  saved. This means that if you set the field to 
YES later, all your settings reappear. 
When a HDMI Matrix is activated, it is automatically registered as V.AUX2, also if 
another source may already be registered as 
V.AUX2. This source must then be registered  to another source name. 
Important information 
AV1 
SOURCE  V.AUX2
HDMI MATRIX  YES
INPUTS  8
AUTO SELECTION  NO
TIMER RECORDER  NO
HDMI  A
SOUND INPUT  HDMI 
						

							64
Add sources to your setup …
The sources connected to the HDMI Matrix  must be registered in the television. 
Configuration of inputs …  >  Configure each input one by one. 
>  Name each input by following on-screen 
instructions. If you do not name an input, 
the name from the selected PUC list is used. 
>  Select a PUC source for the specific input. 
The sources are divided into four categories: 
SET-TOP BOX, DVD PL AYER /RECORDER, 
VIDEO RECORDER and OTHER. 
>  When you store the input settings, you 
can configure the next input. Continue 
the procedure until all connected inputs  are configured. 
>  Press the green button to return to the 
CONNECTIONS menu. 
>> HDMI MATRIX 
HDMI MATRIX 
INPUT 1 
NONE
INPUT 2  NONE
INPUT 3  NONE
INPUT 4  NONE
INPUT 5  NONE
INPUT 6  NONE
INPUT 7  NONE
INPUT 8  NONE 
						

							 DTV
  Sky 
i  Interactive  Help
Slow  Bo\f office  Services
 
R  \bV Guide 
65
The main functions of your equipment 
can be operated with the Beo6 remote 
control. Not all functions may be supported by Beo6. The available 
services and functions are shown in the 
Beo6 display when you activate the  equipment. 
>  Press a source button, for example DT V , 
to switch on connected equipment. 
>  Press the button on the Beo6 display that 
activates the function you want. 
Use equipment menus 
Once you have activated connected equipment, you can operate its own menus with your remote control. 
While equipment menus are shown …  >  Use the navigation button up, down, left 
and right to move in menus. 
>  Press the centre button to select and 
activate a function. 
>  Press BACK to exit menus, or return to a 
previous menu. 
>  Press 
 and use the number buttons to 
enter information in menus or services 
when relevant. (Beo4: Use the number  buttons). 
>  Use the coloured buttons as indicated in 
the menus of your connected equipment. 
>  Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus. 
When you have selected connected equipment 
as a source, press Menu twice to bring up 
the television’s main menu.  Example of a Beo6 display used to operate a 
set-top box. 
The built-in Peripheral Unit  Controller acts as an interpreter between connected video equipment, such as a set-top 
box, video recorder or DVD 
player, and your Bang & Olufsen 
remote control. 
Use the Bang & Olufsen remote  control to gain access to the 
functions offered by your non- Bang & Olufsen equipment. 
When you switch on the  equipment, the functions are 
available via the Beo6 display, or 
via a menu-overlay on the 
television screen, if you use a  Beo4 remote control. 
For instruction in the various 
functions offered by your  equipment, see the product’s 
own guide. 
Some features and functions of the 
television may not be available when  non-Bang & Olufsen equipment is connected. Not all connected video 
equipment are supported by Bang & 
Olufsen. For further information  about supported equipment, contact your Bang & Olufsen retailer. 
Operate other equipment with Beo6 or Beo4 
Use the Beo6 remote control  
						

							PROGRAM GUIDE
RADIO/TV MODE
MENU
INFORMATION
PROGRAM GROUPS  1
S UBTITLE LANGU AGE  2
A UDIO LANGU AGE  3
SETUP  4
PROGRAM LIST  5
66
If you have a Beo4 remote control, some 
functions are available directly via Beo4  when you switch on the equipment. 
Additional functions are available  through a menu-overlay that you bring up on the screen. In this menu you can  see which Beo4 buttons activate specific 
services or functions. 
Your Bang & Olufsen retailer can provide  you with a ‘show mapping’ survey which 
explains operation of the connected 
equipment with Beo4 in more detail. 
>  Press a source button, for example, 
V.MEM , to switch on connected 
equipment. 
>  Press MENU to bring up the menu-overlay. 
>  Press the number button that activates the 
function you want, or press one of the  coloured buttons to activate a function. 
The menu-overlay for equipment connected  to a main room television cannot be displayed on the television screen in the link 
room. However, you can still access the  different features if you press LIST and use 
the navigation button up or down to bring  up  SHIFT  and then select a number or colour.  Direct Beo4 operation 
If you know which Beo4 button activates 
the function you want, you can activate 
the function without bringing up the  menu-overlay first. 
While your equipment is on …  >  Press one of the coloured buttons to 
activate a function. 
>  Press and hold the centre button to bring 
up the Program Guide or the ‘Now/Next’ banner on the screen if you are using 
equipment that supports these functions. 
>  Press MENU and use the number buttons 
to activate the function you want. 
>  Use 
 and  to step between channels*. 
>  Use 
 and  to rewind and wind in, for 
example, recordings*. 
*This operation does not apply to Beo4  without navigation button. 
On some connected equipment you have to  press LIST and use the navigation button up 
or down to bring up SHIFT and press 9 to 
switch the equipment on and off, and on 
some you have to press PL AY then 0 . Example of a menu-overlay. The Beo4 
buttons are shown to the right on the menu, 
and the functions they control are shown to 
the left. The menu may also list buttons on 
the remote control included with your  connected equipment. 
>> Operate other equipment with Beo6 or Beo4
Use the Beo4 remote control  
						

							67
If you connect a compatible 
Bang & Olufsen audio system to 
the television using a Master Link  cable, you obtain the benefits of 
an integrated audio/video 
system. 
Play a CD on your audio system 
using speakers connected to the 
television, or switch on a T V  programme and send the sound 
to your audio system speakers. 
Your AV system can be placed  together in one room or in two rooms with the television placed 
in one room and the audio 
system with a set of speakers  placed in another. 
Not all Bang & Olufsen audio systems 
support integration with the 
television. 
Connect and operate an audio system 
Using a BeoLink cable, connect the  sockets marked MASTER LINK on the 
television and the audio system. 
Program the AV setup with Beo6 
If your television has been set up in an 
AV system, you may need to set it to the  correct Option with Beo6. Switch the 
entire system to standby first. 
Option setting for the television …  >  Place yourself in front of the television. 
>  While holding the • button, press the 
centre button to bring up the SETUP 
menu on Beo6. 
>  Let go of both buttons. 
>  Press Option Pgm to bring up the Option 
Programming display on Beo6. 
>  Press the button that matches the zone in 
which the television is placed, for example, 
Tv Area . 
Option setting for the audio system … >  Place yourself in front of the audio system. 
>  While holding the • button, press the 
centre button to bring up the SETUP 
menu on Beo6. 
>  Let go of both buttons. 
>  Press Option Pgm to bring up the Option 
Programming display on Beo6. 
>  Press the button that matches the zone in 
which the audio system is placed, for example, Audio Area . 
If you move your link room products to other  rooms, remember to have your Beo6 remote control reconfigured by your Bang & Olufsen 
retailer.  Program the AV setup with Beo4 
You can set your television, placed in an  AV-system, to the correct Option using  Beo4. Switch the entire system to standby first. 
Option setting for the television …  >  While holding the • button on Beo4,  
press LIST . 
>  Let go of both buttons. 
>  Use the navigation button up or down to 
bring up OPTION? in the Beo4 display 
and press the centre button. 
>  Use the navigation button up or down to 
bring up V.OPT in the Beo4 display and 
then enter the appropriate number  ( 1 , 2, 4 , 5 or 6 ). 
Option setting for the audio system … >  While holding the • button on Beo4,  
press LIST . 
>  Let go of both buttons. 
>  Use the navigation button up or down to 
bring up OPTION? in the Beo4 display 
and press the centre button. 
>  Use the navigation button up or down to 
bring up A.OPT in the Beo4 display and 
enter the appropriate number 
( 0 , 1 , 2, 4, 5 or 6 ).
Connect your audio system to the television  
						

							Option 0
Option 2Option 1
Option 1Option 2
Option 2
68
>> Connect and operate an audio system
If the television and an audio system is set  up in one room with all speakers connected 
to the television, set the television to 
Option 2 and the audio system to Option 0.  If the television (with or without additional 
speakers) and the audio system (with a connected set of speakers) is set up in the 
same room, set the television to Option 1 
and the audio system to Option 1.
If the audio system is set up in one room,   
and the television (with or without additional  speakers) in another, set the television to 
Option 2 and the audio system to Option 2. 
For information about Option 4, 5 and 6,  see pages 72 and 74 . For further information, 
contact your retailer.  
						

							Z o n e ‘ A’
T VL I S T AVT VZ o n e  ‘ B ’
C DL I S T AVC D
69
Use an audio/video system 
If you integrate your audio system and 
your television, you can choose a  speaker combination appropriate to the 
current video or audio programme, and 
also record video sound on the audio  system. 
To listen to sound from a television source on your audio system speakers without 
switching on the screen, select the zone for 
your audio system speakers on Beo6, and 
then press a source button, such as T V . 
(Beo4: Press LIST and use the navigation  button up or down to bring up AV in the 
Beo4 display, then press T V ). Beo6 
instruction is shown to the left and Beo4 
instruction to the right.  To listen to audio sound on the speakers 
connected to the television, select the zone 
for speakers connected to the television on  Beo6, and then press an audio source  button, such as CD . (Beo4: Press LIST and 
use the navigation button up or down to  bring up AV in the Beo4 display, then press 
CD ). Beo6 instruction is shown to the left 
and Beo4 instruction to the right. 
>> Connect and operate an audio system 
						

							MASTER 
LINK
LINK TV  
OUT 
ANALOGUE
RF Link 
Amplifier
70
The BeoLink system makes it 
possible to distribute picture and/or sound to other rooms 
throughout the house. 
For example, you can connect 
your television in the living room 
to another video system or set of  speakers in another room, 
thereby making it possible to 
‘move’ the picture or sound to  other rooms. 
If you have a BeoLink distribution 
system installed, you can either  use your television in the main  room, such as a living room, or 
in a link room, such as a study or  bedroom. 
Under certain circumstances, it  may be necessary to enter 
modulator settings. 
Distribute sound and picture with BeoLink 
Link connections 
The main room television must be 
connected to the link room system with 
a Master Link cable: 
>  Connect the Master Link cable to the 
socket marked MASTER LINK on the 
television. 
>  If you want to distribute video signals as 
well, connect an ordinary aerial cable to 
the socket marked LINK T V on the 
television. Then run the aerial cable to the  RF Link Amplifier and the Master Link cable to the link room. Follow the 
instructions enclosed with the link room  equipment.  If an audio system is already connected to 
the Master Link socket and you wish to  connect more equipment, the Master Link 
cable must be split in two and joined with 
the cable from the link room using a special  junction box. Contact your Bang & Olufsen retailer for assistance. 
HDMI, VGA and Y – Pb – Pr signals cannot  be distributed from a main room television 
to the link room system. 
To the MASTER LINK socket on  the link room system 
Video signal distribution to  link rooms