Bang & Olufsen Beovision 7 40 55 Television User Manual

							41
Home cinema 
If you connect a projector, you can 
turn your television into a Home  cinema. When you switch to the 
Home cinema setup, the television 
switches the picture from its own 
screen to the projector screen and  activates the appropriate speakers.  Switch to Home cinema 
If a projector is connected, you can use 
your remote control and move the picture 
from the television screen onto a projector 
screen for a special occasion or movie. 
>  Press 
 to bring up the Scene display on 
Beo6, then press Cinema to bring up the 
Cinema display on Beo6. (Beo4: Press LIST  and use the navigation button up or down 
to bring up FORMAT ). 
>  Press Cinema to switch between Home 
cinema mode and ordinary T V mode. 
(Beo4: Press 0 ). 
>  Press 
 to leave the function. (Beo4: Press 
BACK ).  
						

							42
Your television has a built in Sleep Timer which means that you can make it switch off after a designated number of minutes. 
You can also make your television  switch itself on and off automatically via the timed play 
and timed standby functions, for  example, if there is a programme 
you do not want to miss. 
Enter as many as six Timer 
settings, and bring up an on-
screen list of the Timer settings 
you have entered. From this list, 
you can edit or delete your Timer  settings. 
If your television is integrated 
with a Bang & Olufsen audio or 
video system with a Master Link  cable, these systems can perform 
the timed play or timed standby  functions as well. 
For your timed settings to be executed correctly, ensure that 
the built-in clock is set to the  correct time. For further 
information, see page 47 . 
NOTE! For safety reasons, the stand 
will not turn if the television is  switched on by a Play Timer. 
Set the television to switch itself on or off
Play Timer 
If you connect a Bang & Olufsen audio or video product to your television with 
a Master Link cable, you can exclude or 
include it in timed functions via the  PL AY TIMER menu. For example, set the 
television Play Timer to ON and an audio  system’s Play Timer to OFF if you wish 
timed functions to apply only to the 
television. 
To switch on the Play Timer …  >  Bring up the T V SETUP menu and highlight 
PL AY TIMER. 
>  Press the centre button to bring up the 
PL AY TIMER menu, and highlight TIMER 
ON/OFF. 
>  Press the centre button to bring up the 
TIMER ON/OFF menu. 
>  Use the navigation button left or right to 
reveal ON. 
>  Press the centre button to store the 
setting. 
For further information about how to  program Timers and switch the Play Timer 
on or off for a connected Bang & Olufsen 
audio or video product, see the guide  enclosed with the product. 
Sleep Timer 
You can make the television switch off  automatically af ter a number of minutes. 
To activate the Sleep Timer with Beo6 …  >  Press Sleep repeatedly to select the 
number of minutes or Off. 
To activate the Sleep Timer with  Beo4*
1 … 
>  Press LIST and use the navigation button 
up or down to bring up SLEEP in the Beo4 display. 
>  Press the centre button repeatedly to 
select the number of minutes.
To deactivate the Sleep Timer …  >  Press LIST and use the navigation button 
up or down to bring up SLEEP in the Beo4 display. 
>  Press the centre button repeatedly until 
OFF is shown in the television display. 
To set the Sleep Timer via the menu …  >  Bring up the T V SETUP menu and highlight 
SLEEP TIMER. 
>  Press the centre button to bring up the 
SLEEP TIMER menu. 
>  Press the centre button repeatedly to 
switch between the number of minutes 
and OFF.
1* If you have a Beo4 without navigation 
button, SLEEP may not be available.   
						

							43
>> Set the television to switch itself on or off 
Timed play and timed standby 
You can preset your television to start and stop automatically at the same time 
and day every week. 
To enter settings for timed play or timed  standby … 
>  Bring up the T V SETUP menu and highlight 
PL AY TIMER. 
>  Press the centre button to bring up the 
PL AY TIMER menu and highlight PL AY 
TIMER PROGRAMMING. 
>  Press the centre button to bring up the 
PL AY TIMER PROGRAMMING menu. 
>  Use the navigation button up or down to 
move through the menu items. 
>  Enter information or use the navigation 
button left or right to view your choices 
for each item. When DAYS is highlighted,  use the navigation button right once to be 
able to move through the days, and use 
the navigation button up or down to  remove a day you do not want. Use the 
navigation button right to move to the 
next day, and use the navigation button left to move back to a previous day. When 
the weekday(s) you want are displayed, 
press the  centre button to accept the day(s). 
> When you have filled in the required 
information, press the centre button to 
store your Timer settings. 
>  Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus. 
If the television is set up in a link room, 
Timer programming must be carried out on  your main room television.  Bring up an on-screen list of the settings 
you have entered. From this list, you can 
edit or delete your Timer settings. 
To view, edit or delete your Timer  settings … 
>  Bring up the T V SETUP menu and highlight 
PL AY TIMER. 
>  Press the centre button to bring up the 
PL AY TIMER menu and highlight PL AY 
TIMER INDEX. 
>  Press the centre button to bring up your 
list of Timer settings. The first Timer 
setting in the list is already high   lighted. 
>  Use the navigation button up or down to 
move the cursor to a Timer setting you 
wish to edit. 
>  To edit a setting, press the centre button 
and follow the procedure described under 
‘Timed play and timed standby’ . 
>  To be able to delete a selected setting, 
press the yellow button. 
>  If you change your mind, use the 
navigation button left to move the setting back into the list. You can also press and 
hold BACK to exit all menus. 
>  Press the yellow button a second time to 
delete the setting.  PL AY TIMER PROGRAMMING menu 
Abbreviations for days of the week:    M …  Monday 
  T …  Tuesday 
  W …  Wednesday 
  T …  Thursday 
  F …  Friday 
  S …  Saturday 
  S …  Sunday
If a Wake-up Timer has been programmed, 
the television cannot be part of an ordinary 
Play Timer or Standby Timer until the 
Wake-up Timer has been carried out or  disabled. 
View, edit or delete a Timer 
TIMER PROGRAMMING 
SOURCE  T V
CHANNEL  18 BBC
SUB CHANNEL 
START TIME  15:40
STOP TIME  16:40
DAYS  M . . T F . S 
						

							44
The television can be set to switch itself to standby af ter some time with no operation. The factory setting is 4 hours. 
This function only applies in video mode  not in audio mode. 
To make standby settings …  >  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight AUTO 
STANDBY. 
>  Press the centre button to bring up the 
AUTO STANDBY menu and use the  navigation button up or down to select 
the setting you want. 
>  Press the  centre button to store the setting. 
>  Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus. 
When AUTO STANDBY is activated, a  message appears on your television screen if 
the television has not been operated during 
the time set in the menu. The television then  switches to standby, if you do not operate it.  AUTO STANDBY menu. 
When no signal has been detected for 
15 minutes, the television is switched to  standby. 
>> Set the television to switch itself on or off 
Standby settings 
AUTO STANDBY 
AFTER 1 HOUR 
AFTER 2 HOURS 
AFTER 4 HOURS 
OFF  
						

							45
Wake-up Timer 
You can make the television wake you up in the morning. 
The Wake-up Timer is a once- only Timer, it lasts for one hour. 
Like an alarm clock it is disabled  once it has been executed. It 
applies only to the television it  has been programmed on. 
Once you have made one 
Wake-up Timer, the television  automatically suggests the time 
you entered for the latest 
Wake-up Timer when you enter  a new one. 
Wake-up Timers can of course  also be disabled again. 
When you have programmed a 
Wake-up Timer, the television  cannot be part of an ordinary 
Play Timer until the Wake-up 
Timer has been carried out or  disabled. 
You must choose the source and channel 
number of your Wake-up Timer as well 
as the start time. 
To enter settings for a Wake-up Timer …  >  Bring up the T V SETUP menu and highlight 
PL AY TIMER. 
>  Press the centre button to bring up the 
PL AY TIMER menu and highlight WAKE UP 
TIMER. 
>  Press the centre button to bring up the 
WAKE UP TIMER menu. 
>  Use the navigation button up or down to 
move through the menu items. 
>  Enter information or use the navigation 
button left or right to view your choices 
for each item. 
>  When you have filled in the required 
information, press the centre button to 
store your Wake-up Timer. 
>  Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus.  WAKE UP TIMER menu. 
Enter a Wake-up Timer 
WAKE UP TIMER 
SOURCE 
T V
CHANNEL  21 BBC
SUB CHANNEL 
START TIME  07:00
ON/OFF  ON 
						

							46
You can bring up the settings for the Wake-up Timer to check the time or to disable the Wake-up Timer by setting it 
to OFF. 
To change settings for a Wake-up Timer  or delete it … 
>  Bring up the T V SETUP menu and highlight 
PL AY TIMER. 
>  Press the centre button to bring up the 
PL AY TIMER menu and highlight WAKE UP 
TIMER. 
>  Press the centre button to bring up the 
WAKE UP TIMER menu. 
>  Use the navigation button up or down to 
move through the menu items. 
>  Use the navigation button left or right to 
change settings, or enter a new time. 
Change the ON/OFF setting to OFF if you  wish to delete the Wake-up Timer. 
>  When you have made your changes, press 
the centre button to store them. 
>  Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus.  TIMER SETUP menu.
Check or delete a Wake-up Timer 
>> Wake-up Timer 
TIMER SETUP 
TIMER ON/OFF 
OFF
TIMER INDEX
TIMER PROGRAMMING
WAKE UP TIMER  07:00 
						

							47
Set the time and date 
When you preset your television to switch itself on or off at a  particular time, the clock ensures 
that this feature is switched on  and off at the right time. To bring up the clock on the display, 
press Clock on Beo6. The clock display 
disappears again af ter ten seconds. 
(Beo4: Press LIST and use the navigation  button up or down to bring up CLOCK in 
the Beo4 display and press the centre  button to bring up the clock). 
>  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight CLOCK. 
>  Press the centre button to bring up the 
CLOCK menu. 
>  Use the navigation button up or down to 
move through menu items. 
>  Use the navigation button left or right to 
see your choices for each item. 
>  Press the  centre button to store your clock 
and calendar options, or …
>  … press and hold BACK to exit all menus 
without storing.   Abbreviations for months 
 
Jan …  January 
  Feb …  February 
  Mar …  March 
  Apr …  April 
  May …  May 
  Jun …  June 
  Jul …  July 
  Aug …  August 
  Sep …  September 
  Oct …  October 
  Nov …  November 
  Dec …  December CLOCK 
TIME  20:00
DATE  23
MONTH  APR
YEAR  2009 
						

							48
Activate parental control 
To make full use of the parental control system, begin by assigning an access 
code. This restricts access to the 
programmes and channels with broad -
casted restrictions, and prevents the  settings from being changed by others. 
Choose a code that is easy to remember. 
The default setting is 0000. 
>  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight PARENTAL 
CONTROL. 
>  Press the centre button to bring up the 
PARENTAL CONTROL menu and highlight 
ACCESS CODE. 
>  Press the centre button to bring up the 
ACCESS CODE menu. 
>  Press 
 and use the number buttons to 
enter the default code (0000). (Beo4: Use 
the number buttons). 
>  Highlight NEW CODE and enter a new 
code. 
> 
Enter the new code once more to confirm it.
>  Press the centre button to store the code. 
>  Press and hold BACK or press a source 
button, for example T V or DT V to exit all 
menus. 
To change your code at any time, follow the  procedure described above. If, for some 
reason, you have forgotten your code, then 
you can key in 9999 three times when 
OLD CODE is highlighted. This allows you to  enter a new code. Assign an access code. 
Assign an access code 
If parental control is available in 
your area, you can switch it on or  off. You can apply T V parental 
guidelines and the MPAA rating 
system. 
If you assign an access code and 
switch parental control on, you 
will be required to enter this  access code when  
ever you want 
to watch a programme or  channel that has been blocked. 
Whenever a blocked programme 
or channel is selected, your screen 
goes blank, the sound is shut off 
and an on-screen menu prompts 
you to enter your access code. 
If you wish to change or override 
your settings, the access code is  also required. 
ACCESS CODE 
OLD CODE  . . . . 
NEW CODE  . . . . 
CONFIRM CODE  . . . .  
						

							49
>> Activate parental control 
You can choose to apply the MPA A  rating system as parental control. Select 
and store the restriction level that you 
want to impose. 
>  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight PARENTAL 
CONTROL. 
>  Press the centre button to bring up the 
PARENTAL CONTROL menu and highlight 
MPA A RATING. 
>  Press the centre button to bring up the 
MPA A RATING menu. 
>  Press 
 and use the number buttons to 
enter the access code. If you have not yet 
entered your own code, enter the default 
code 0000. (Beo4: Use the number  buttons). 
>  Use the navigation button left or right to 
adjust the setting RATING. This auto -
matically adjusts the restriction setting. 
Options are: G, PG, PG-13, R, NC-17, X,  NOT RATED, N/A, and OFF. 
>  Press the centre button to store the 
setting. 
>  Press and hold BACK or press a source 
button, such as T V , to exit all menus.  Preset T V Parental guidelines. 
Preset the MPA A rating. 
Preset TV Parental guidelines 
If you choose to apply the system of T V 
parental guidelines, you can select one common restriction level for all 
categories or preset the restriction level 
for the individual categories. 
>  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight PARENTAL 
CONTROL. 
>  Press the centre button to bring up the 
PARENTAL CONTROL menu. T V PARENTAL 
GUIDELINES is already highlighted. 
>  Press the centre button to bring up the 
T V PARENTAL GUIDELINES menu. 
>  Press 
 and use the number buttons to 
enter the access code. If you have not yet  preset your own code, enter the default 
code (0000). (Beo4: Use the number  buttons). 
>  Use the navigation button left or right to 
adjust the setting OVERALL. This 
automatically adjusts the different categories to one common restriction 
setting. Options are: T V-Y, T V-Y7, T V-G, 
T V-PG, T V-14, T V-MA, and N/A. 
Preset the MPAA rating 
T V PARENTAL GUIDELINES 
ACCESS CODE  . . . . 
OVERALL  OFF 
FANTASY VIOLENCE  T V-Y7 
VIOLENCE  T V-PG 
SEXUAL SITUATIONS  T V-14
L ANGUAGE  T V-PG 
DIALOGUE  T V-14 
MPA A RATING 
ACCESS CODE  . . . . 
RATING  PC-13  
						

							50
>> Activate parental control When a blocked programme or channel is selected, the screen goes blank, the  sound is shut off, and the access code 
must be entered. All the programmes 
and channels then become available, 
and parental control is switched off until  you switch the television to standby. 
>  Select a blocked channel. 
>  Press 
 and use the number buttons to 
enter your access code. (Beo4: Use the  number buttons). 
>  The selected channel is now available,  
as are all other blocked channels. 
>  If you do not know the code or you wish 
to view another channel, use the  navigation button up or down to change 
channels. 
If an incorrect access code is entered three 
times, the television automatically switches 
to standby. 
When parental control is active …