Bang & Olufsen Beovision 7 40 55 Television User Manual

							51
Apply Closed Captioning 
Choose the type of Closed Captioning you wish to view and whether or not 
you want Closed Captioning to be 
displayed automatically. 
>  Bring up the T V SETUP menu and highlight 
OPTIONS. 
>  Press the centre button to bring up the 
OPTIONS menu and highlight CLOSED 
CAPTIONING. 
>  Press the centre button to bring up the 
CLOSED CAPTIONING menu. 
>  Use the navigation button left or right to 
adjust the setting for DISPL AY. Choose ON or OFF. 
>  Highlight T YPE and use the navigation 
button left or right to select a type of 
Closed Captioning. Options are: CC1, CC2, 
CC3, CC4, TEXT1, TEXT2, TEXT3, or TEXT4. 
> 
Press the  centre button  to store. 
>  Press and hold BACK or press a source 
button, such as T V or DT V , to exit all 
menus. 
To turn Closed Captioning on or off  while watching a programme … 
>  Press CC to see the status of closed 
captioning – CC ON appears on the screen. 
(Beo4: Press TEX T ). 
>  Press CC again to turn Closed Captioning 
off. (Beo4: Press TEX T ). 
>  Press CC a third time to restore Closed 
Captioning. (Beo4: Press TEX T ). 
Closed Captioning is not available in Korea. 
Closed Captioning options 
You can apply subtitles, or 
Closed Captioning, to all your sources and channels, provided 
that the broadcaster supports  Closed Captioning. 
Select a type of Closed  Captioning via the CLOSED 
CAPTIONING menu. 
You can, however, choose to  turn Closed Captioning on or off at any time – for example, while 
watching a specific programme 
– even if you have preset the  television to display Closed Captioning at all times. 
CLOSED CAPTIONING 
DISPL AY  OFF 
T YPE  CC1  
						

							52
Settings and preferences for the digital tuner 
In the digital tuner menus you can make your own settings, enter 
information on your current 
terrestrial or cable setup and make  channel searches. 
The V-CHIP menu allows you to  restrict access to particular channels or rated contents. 
Once you have scanned in the channels, 
you can make a Channel List of your 
favourite channels. This means that you  reduce the time you spend looking for specific channels. 
Contents of the CHANNEL menu … 
AUTO SCAN … Scan in all channels  automatically. Select which channels to scan for. Options are: AIR, CABLE AUTO, 
CABLE STD, CABLE HRC and CABLE IRC.  When you have selected the channels to  scan, you must confirm or cancel the channel search. Default settings are AIR 
and CONFIRM. When you scan in channels, 
the current channel list and favourite list  will be lost. If you wish to know which 
signal type to use, contact your cable  provider.* 
FAVOURITE CHANNEL … Make a list af your  favourite channels. If you have not made a 
favourite list, the main list will appear when you press List . (Beo4: Press and 
hold the centre button).  CHANNEL ADD/DELETE … Add or delete 
channels. The on-screen display gives a 
status of whether a channel is added to or  deleted from the main list. A channel can 
be added or deleted by pressing the 
centre button . When a channel is deleted, 
it is removed from the channel sequence,  but it can still be reached if you enter the 
channel digits. 
SIGNAL STRENGTH … See the strength of  the received signal. 
*In Korea options are AIR and CABLE. Default  settings are AIR and CONFIRM. 
About channels …  
						

							53
>> Settings and preferences for the digital tuner 
You can apply subtitles, or Closed  Captioning, to all your channels. 
Choose the type of Closed Captioning you wish to view and whether or not 
you want Closed Captioning to be 
displayed automatically. 
You can choose to switch Closed  Captioning on or off at any time – for example, while watching a specific programme – even if you have preset 
the television to display Closed 
Captioning at all times.  Contents of the CAPTION menu … 
ON/OFF … Choose to display Closed  Captioning or not. The default setting is OFF. 
ANALOGUE MODE … Select the mode to  use for Closed Captioning in your 
analogue television receiver, and if the 
Closed Captioning function should be set 
to ON. Options are: CC1, CC2, CC3, CC4, 
TEX T1, TEX T2, TEX T3 and TEX T4. The  default setting is CC1. 
DIGITAL MODE … Select the mode to use  for Closed Captioning in your digital 
television receiver, and if the Closed  Captioning function should be set to ON.  Options are: SERVICE1, SERVICE2, 
SERVICE3, SERVICE4, SERVICE5 and 
SERVICE6. The default setting is SERVICE1. 
If you press CC repeatedly you change the  mode or switch Closed Captioning on or off, even if you have preset the Closed 
Captioning function to ON. (Beo4: Press 
TEXT repeatedly ).  DIGITAL FONT OPTIONS … Set your 
preferences for the digital font, if you have 
set the Closed Captioning function to ON: 
  SIZE … Select the size of the digital font. 
Options are: DEFAULT, SMALL, STANDARD  and LARGE. The default setting is DEFAULT. 
  ST YLE … Select a style for the digital font. 
You can choose between eight different  styles. The default setting is DEFAULT. 
  COLOUR … Select a colour for the 
background, the foreground and the edge 
of the digital font. You can choose  between DEFAULT and eight different 
colours and the default setting is DEFAULT. 
  OPACIT Y … Select the opacity for the 
background and foreground of the digital 
font. Options are: DEFAULT, SOLID, 
TRANSLUCENT, TRANSPARENT and  FL ASHING. The default setting is DEFAULT. 
  EDGE ST YLE … Select an edge style for 
the digital font. You can choose between  seven different styles. The default setting is DEFAULT. 
The DEFAULT option in the DIGITAL FONT  OPTIONS menu is the presentation as it is set by the programme provider. 
*The CAPTION menu is not available in Korea. 
About the CAPTION menu … *  
						

							54
>> Settings and preferences for the digital tuner 
The V- CHIP menu allows you to lock  specific television contents. 
When you enter the V- CHIP menu, you  can lock (and later unlock) specific contents 
to avoid others from watching the  contents. Select the contents you wish 
to lock. Whenever you try to access  locked contents, you are asked to key in 
your V- Chip pincode. 
If one content lock is released by the  correct V- Chip pincode all contents are 
open and content lock will not be active 
again before the television enters  standby. 
The V- Chip pincode system of the  built-in ATSC tuner is not the same as the 
pincode system for your television, but it may be easier for you, if you choose to 
use the same code for both systems.  Contents of the V- CHIP menu … 
Before you can change the setting in the 
V-CHIP menu, you must enter the V-Chip  pincode. The default setting of the V-Chip 
pincode is 0000. 
CHANGING PIN 
You can change your V-Chip pincode at any  time. Press 
 and use the number buttons 
to enter a new four-digit V-Chip pincode.  Enter the new V-Chip pincode again to confirm. (Beo4: Use the number buttons). 
US RATING SET TING  In the US RATING SET TING menu you can 
apply the MPA A rating system or the T V-PG  system as parental control. Depending on which system you choose options are: 
–   ALLOW ALL 
–   BLOCK ALL 
–   T V-Y, T V-Y7, T V-G, T V-PG, T V14, T V-MA 
–   F V, D, L, S, V 
–   P, PG, PG13, R, NC17, X 
The default setting is ALLOW ALL.  CANADIAN RATING SET TING 
In the CANADIAN RATING SET TING menu 
you can apply the English classification  system or the French classification system as  parental control. 
Depending on which system 
you choose, options are:
 
–   ALLOW ALL 
–   BLOCK ALL 
–   E, C, C8+, G, PG, 14+, 18+ 
–   E, G, 8+, 13+, 16+, 18+ 
The default setting is ALLOW ALL. 
Should you forget your code … If you forget your V-Chip pincode, enter the 
V-CHIP menu and key in ‘9999’. You must  now enter a new personal code. 
*The V-CHIP menu is not available in Korea.
About the V-CHIP menu … *  
						

							55
>> Settings and preferences for the digital tuner 
In the SETUP menu, you set up your  personal preferences. You can select a menu language to be used in the menus. 
When you select a preferred language 
for audio, this language will be used  when available from the programme provider.  Contents of the SETUP menu … 
TIME … The clock is automatically set by the  programme provider, but it can fail if the 
information is sent wrong. 
  DAYLIGHT SAVING … Select whether to 
use daylight saving for the clock or not. 
Options are YES and NO. The default  setting is YES. Note that DAYLIGHT 
SAVING will only work if the programme  provider’s daylight saving flag is set to ON 
and you have set the DAYLIGHT SAVING 
to YES. Otherwise, real daylight saving is  set to OFF. 
  TIMEZONE … Set the local information for 
the clock. Options are EASTERN, CENTRAL,  MOUNTAIN, PACIFIC, AL ASK A, HAWAII, 
ATL ANTIC and NEWFOUNDL AND. The  default setting is EASTERN.  SOUND … 
  MULTI-TRACK SOUND … Select the 
preferred audio language to be used, if 
available from the programme provider. 
Options are ENGLISH, SPANISH and  FRENCH. The default setting is ENGLISH. 
  DIGITAL OUTPUT … Select the preferred 
sound output. Options are DOLBY DIGITAL 
and PCM. The default setting is DOLBY  DIGITAL. 
MENU L ANGUAGE … Select the language  to be used in the menus. Options are ENGLISH, SPANISH and FRENCH. The default setting is ENGLISH. 
VERSION INFORMATION … Use this menu  to see the current ATSC tuner version, model and release date. 
In Korea only MULTI-TRACK SOUND, 
DIGITAL OUTPUT and VERSION  INFORMATION are available. Options for 
MULTI-TRACK SOUND are KOREAN,  ENGLISH and JAPANESE. Default setting is 
KOREAN. 
About the SETUP menu …  
						

							56
Settings and preferences for the Blu-ray player 
The Blu-ray menus offer options for settings and adjustments. 
Here you find detailed information 
about the individual menus. 
For an overview of the Blu-ray menu structure, see page 5 . 
The Blu-ray player only supports 
playback of 12 cm discs. 
If you play back a 3D Blu-ray disc, it is  automatically shown in 3D. Bring up the SETUP menu 
>  Press DVD Setup to bring up the DVD 
SETUP menu. (Beo4: Press LIST and use  the navigation button up or down to bring  up SHIFT then press 8 ). 
What ’s on the PL AYBACK STATUS  menu … 
STANDARD … Playback status and stop  status will be displayed. 
EXTENDED … Playback status, stop status  and automatic status, such as BONUSVIEW and angle, will be displayed, 
if available on the disc. 
What ’s on the AUDIO FORMAT menu …  STANDARD … Decode all audio formats to  PCM for up to 7.1 (seven sound channels 
and one channel for low-frequency sound). 
STANDARD audio format is recommended  to be able to play all sound tracks. 
RE-ENCODE … Decode all audio formats to  DTS for up to 5.1 (five sound channels and one channel for low-frequency sound). 
BITSTREAM … All audio formats are sent in  its original format for up to 7.1 (seven 
sound channels and one channel for low-
frequency sound). If this option is selected,  sound for Picture in Picture and effect 
sound for Blu-ray disc menus are not 
available. 
What ’s on the VIDEO FORMAT menu … 
24 HZ ON … The signals are sent in format  1080p and 24 HZ. This is recommended.
24 HZ OFF … The signals are sent in native  format. 
What ’s on the L ANGUAGE menu … 
AUDIO … Enter the menu and select the  preferred audio language to be used. 
SUBTITLE … Enter the menu and select the  preferred subtitle language to be used*. 
DISC MENU … Enter the menu and select  the language to be used in disc menus.  What ’s on the ACCESS CONTROL menu … 
When you enter the ACCESS CONTROL menu, you are asked to enter and confirm 
your access code. The first time you enter 
the menu, you are asked to select a new  access code. 
PARENTAL LOCK … Enable or disable the  Parental Lock function. 
RATING … Some discs feature a Parental  Lock level. If you specify a level lower than 
the one contained on the disc, the disc  will not play unless your access code is entered. 
NEW ACCESS CODE … Enter and confirm a  new access code at any time. 
What ’s on the ADVANCED menu …  MEMORY MANAGEMENT … You can  reset the BD-Live memory. 
NET WORK … If you choose the  CONFIGURATION field to be MANUAL the 
fields IP ADDRESS, SUBNET MASK,  GATEWAY and DNS become available.  
The MAC ADDRESS field informs you of  the Mac address. 
MODULE INFORMATION …  See information 
about software version and regions. 
SOFT WARE UPDATE … If your television is  connected to the Internet, you can update 
the Blu-ray player, provided that new  software is available. For further information contact your retailer. 
*Some discs will require you to choose a  subtitle language from a disc menu, even if 
you have previously selected a default subtitle  language from the L ANGUAGE menu.  
						

							57
>> Settings and preferences for the Blu-ray player To disable the Parental Lock … IMPORTANT! You can disable the Parental 
Lock completely if, for example, you have 
forgotten your access code. You must  remove the disc from the Blu-ray player and 
make sure the loader is closed before you disable the Parental Lock. 
>  Press DVD to activate the Blu-ray player. 
>  Press Menu twice to bring up the T V 
SETUP menu. (Beo4: Press MENU twice). 
>  Use the navigation button down to move 
the cursor down to the OPTIONS menu. 
>  Press Menu to reveal the item PARENTAL 
LOCK. (Beo4: Press MENU ). 
>  Press the centre button to bring up the 
PARENTAL LOCK menu. 
>  Press the centre button to disable the 
Parental Lock, or …
>  … press and hold BACK to exit all menus 
without storing. 
NOTE! When you disable the Parental Lock, 
the Blu-ray player restarts automatically.  
All settings you have made for the Blu-ray  player, such as language selection, are reset 
and you must make your settings again.  
						

							58
During playback of your music, you can see the NOW PL AYING menu with cover, 
and information about artist, title and 
track, if available. When you browse  your photos you can bring up the INFO menu and get access to additional 
functions. 
Listen to your music … 
>  Press DVD to activate the Blu-ray player. 
>  Insert a data disc or USB device with your 
music.
>  Use the navigation button up or down to 
select DATA DISC or USB and press the centre button. 
>  Use the navigation button up or down to 
select the MUSIC menu and press the centre button. 
>  Use the navigation button up or down to 
browse your files and folders and press 
the centre button to open the folder or  start playback of the file. 
>  Use 
 and  to cue during playback.
>  Use 
 and  to step in tracks during 
playback.
>  Press STOP to pause.
>  Press Repeat to repeat playback (Beo4: 
press the yellow button then press 6).
>  Press PL AY to resume playback.
>  Press BACK to back up through previous 
menus or press and hold BACK to return 
to the main menu.  MEDIA BROWSER menu.
Browse your photos…
>  Press DVD to activate the Blu-ray player. 
>  Insert a data disc or USB device with your 
photos.
>  Use the navigation button up or down to 
select DATA DISC or USB and press the centre button. 
>  Use the navigation button up or down to 
select the PHOTO menu and press the centre button. 
>  Use the navigation button up or down to 
browse your files and folders and press 
the centre button to open the folder. 
>  Press the centre button to open your 
photo in full screen view. The slideshow 
starts automatically.
>  Press STOP to pause.
>  Press PL AY to resume playback. 
>  Press BACK to back up through previous 
menus or press and hold BACK to return 
to the main menu. 
Blu-ray player – media browser 
You can play music and browse  your photos stored on a USB device or data disc on your 
television. You get access to the  MEDIA BROWSER menu, when 
you insert a data disc or USB  device in your television.
If you have music and photos 
stored on the same data disc or  USB device, you can start the  music and return to the main 
menu to start a slide show of 
your photos. Then you can play  music and see your photos at the 
same time.  
The Blu-ray player only supports 
playback of music files in MP3 format 
and photo files in JPEG format.
Only remove a USB device when the  Blu-ray player is switched off.
To play content from the USB device,  playback of a loaded disc must be stopped.
Use the media browser 
MEDIA BROWSER 
PHOTO
MUSIC  
						

							59
The pincode system 
The pincode system is intended to make normal use of your 
television impossible for someone who does not know 
the pincode. You choose  whether or not to activate the  pincode system. 
When the pincode system is  activated and the television has been disconnected from the 
mains for 15–30 minutes, the  pincode system goes into effect. 
When reconnected and switched  on, the television automatically 
switches itself off after four  minutes. Entering the pincode 
returns the television to normal. 
Note: If you change your pincode more 
than five times within a three-hour  period, the PINCODE menu becomes 
inaccessible for three hours, assuming 
that the television is not disconnected 
from the mains. Disconnecting the 
television resets the three-hour period. 
Activate the pincode system 
If you wish to deactivate the pincode  system, you can do so by deleting your 
pincode. 
To activate the pincode system …  >  Bring up the T V SETUP menu. 
>  Press 
 twice, followed by STOP . The 
PINCODE menu appears on the screen. 
>  Enter the four digits of your code. 
>  Press the centre button after the last digit 
is found. 
>  Re-enter your code to confirm it and press 
the centre button again. If the two codes  are not identical, the input fields are cleared and you must enter the code 
again. 
To change or delete your pincode …  >  Bring up the T V SETUP menu. 
>  Press 
 twice, followed by STOP . The 
PINCODE menu appears on the screen. 
>  Enter the correct pincode and press the 
centre button. DELETE PINCODE is 
highlighted. 
>  To delete your code, press the centre 
button. 
>  To change your code, use the navigation 
button down to highlight NEW PINCODE 
and press the centre button. Enter the  new code and press the centre button. 
Re-enter the new code to confirm it. 
If you inadvertently press a wrong button  while entering a code, press BACK . The 
entry is cancelled and the input fields are 
cleared. 
PINCODE 
PINCODE  0 . . .
CONFIRM PINCODE  0 . . .
PINCODE 
DELETE PINCODE 
NEW PINCODE  
						

							60
If your television has been disconnected 
from the mains for 15 –30 minutes, the  television prompts you for the pincode when you switch it on. You may not be able to switch the television on 
immediately – wait approximately 
30 seconds and try again. 
IMPORTANT! If you are prompted for a  pincode the first time you switch on 
your   television, contact your Bang & 
Olufsen   retailer. 
Should you lose or forget your code, contact  your Bang & Olufsen retailer. Your retailer can provide you with a mastercode, which 
disables your pincode.  To enter your pincode … 
>  Enter the code digits. 
>  Press the centre button when the last 
digit is entered. 
>  Your television starts up again. 
Five incorrect entries will cause the television 
to shut down for three hours, during which  operation is not possible. 
If you have forgotten your pincode … 
>  Contact a Bang & Olufsen retailer to 
receive a five-digit mastercode. 
>  When the television prompts you for your 
pincode, press and hold 
 to bring up the 
MASTERCODE menu. 
>  Enter the code digits and press the centre 
button to deactivate your pincode and 
reactivate your television. 
To use the pincode system again …  >  Follow the procedure for activating the 
pincode system. 
Enter the pincode 
>> The pincode system 
PINCODE 
PINCODE  0 . . .
MASTERCODE 
MASTERCODE 0 . . . .