Home > ATT > Communications System > ATT System 25 Installation And Maintenance Manual

ATT System 25 Installation And Maintenance Manual

Here you can view all the pages of manual ATT System 25 Installation And Maintenance Manual. The ATT manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 141

INSTALLATION
LEGEND:
ZTN79 -
WP90851-L1 -
A2 -
B1 -
C1 -
C2 -
C3 AND C4 -
P1-
W1 -
Figure 2-51.HYBRID LINE CP
MODULAR Y ADAPTER
KS-23475 ADAPTER
TYPICAL -103A CONNECTING
MODULAR CORD (D8W-87)
OCTOPUS CABLE (WP90780)
MODULAR CORDS BUILT INTO
KS-23475 ADAPTER
KS-22911 POWER SUPPLY
INSIDE WIRING CABLE
I
PERSONAL
COMPUTER
STARLAN NETWORK
WORKSTATION
7300H Series Terminal/STARLAN NETWORK Workstation
Connections
2-116 

Page 142

INSTALLATION
INSTALL MUSIC-ON-HOLD INTERFACE
Note:Use of equipment that rebroadcasts copyrighted music or
other material may be required to obtain a license from a
third party such as ASCAP or BMI.
FCC-Registered Music Source Interface
The music source is connected to a ZTN78 CP through the SIP (see Figure
2-52).
1.
2.
3.
4.
Using an octopus cable, connect the CP to an 858A Adapter at the
SIP.
Using inside wire, connect T and R leads on the other side of the
858A Adapter to the PT and PR terminals on the...

Page 143

INSTALLATION
LEGEND :
TN742 –
ZTN78 –
B1 -
C2 -
C5 -
W1 –
MOH -
ANALOG LINE CP
TIP RING CP
TYPICAL -103A CONNECTING BLOCK
OCTOPUS CABLE (WP90780) PEC 2720-05P
MODULAR CORD (D4BU-87)
INSIDE WIRING CABLE
KS-23395 INTERFACE
Figure 2-52.Music Source, FCC Registered
2-118 

Page 144

INSTALLATION
Non-FCC Registered Music Source Interface
The music source is connected to a ZTN78 CP (see Figure 2-53). Connect
the CP to a 858A Adapter at the SIP.
Follow the instructions for installing FCC-registered equipment. You must
also install a kit-of-parts (D-181575; includes 36A Voice Coupler, 201213
transformer, and KS-23395 MOH interface). Follow the wiring instructions
included with the kit.
LEGEND:
TN742 - ANALOG LINE CP
ZTN78 - TIP RING CP
B1- TYPICAL -
103A CONNECTING BLOCK
C2 - OCTOPUS...

Page 145

INSTALLATION
Music Source
(Customer supplied)
Music-on-Hold
interface
(KS-23395)
GRGR             GR
MSHI
q
q
q(Optional)DW8A-SE909A/B
Univversal Coupler
(Replaces 36A
Voice Coupler)
MSHI               CTCT
J2
MSLOMSLO                     CRCR
Twisted Pair
26AWG Min.PR             R
J1
PT             TT
System 25
DW8A-SE
J3
ZTN78
Circuit
Pack858A
Adapter
-48VGRD
-48dc
Power
Source
WP-90780
Octopus Cable
Figure 2-53a. Music-on-Hold
November 19952-119a 

Page 146

INSTALLATION
2-119b
This page intentionally left blank.
November 1995 

Page 147

INSTALLATION
INSTALL EXTERNAL ALERTS
External
54).
1.
2.
3.
alerts are connected to the system through a ZTN78 CP (Figure 2-
Connect the CP to a 858A Adapter at the SIP.
Connect the other side of the adapter to a 103A Connecting Block
using building wiring.
Connect the block and alerting device with a D4BU cord.
LEGEND :
TN742 - ANALOG LINE CP
ZTN78 - TIP RING CP
B1- TYPICAL -103A CONNECTING BLOCK
C2 - OCTOPUS CABLE ( WP90780 )
C5 - MODULAR CORD ( D4BU-87 )
R1- ElCM-50 RINGER OR EQUIVALENT
W1- INSIDE...

Page 148

INSTALLATION
INSTALL RECORDED DELAY ANNOUNCEMENT
Delayannouncements are installed the same way as external alerts.
INSTALL DICTATION SYSTEM INTERFACE
If the equipment does not require a contact closure, follow the instructions
for installing external alerts.
If the equipment requires a contact closure, follow the instructions below for
connecting a paging system to the TN763 CP.
INSTALL PAGING SYSTEM INTERFACE
PagePac*Paging System,
or compatible paging equipment, may be
connected to System 25.
System 25...

Page 149

INSTALLATION
Direct Connection to TN763 Auxiliary Trunk CP
Paging
(Figure
l
l
equipment can be connected directly to a TN763 Auxiliary Trunk CP
2-55) when the following conditions exist:
Paging equipment is FCC registered.
Paging equipment requires a contact closure
Connect as shown in Figure 2-55, following the steps
1.Connect the CP to a 66-type block, using
Use kit-of-parts D-1 81524 (PEC 62511).
Note:The 66-block provides a 3-pairfor proper operation.
below:
an A25D 25-pair cable.
interface to TN763...

Page 150

INSTALLATION
SYSTEM 25
CABINETPART OF
25 PAIR CABLE
PART OF
66-BLOCK
AW1C5
TN763B1
<
PAGING OR
DICTATION
SYSTEM
LEGEND :
TN763– AUXILIARY TRUNK CP
A – SINGLE-ENDED 25 PAIR CONNECTOR CABLE (A25D)
B1 -TYPICAL -103A CONNECTING BLOCK
C5 -MODULAR CORD (D4BU-87)
W1 -INSIDE WIRING CABLE (4-PAIR)
NOTE :
Figure
APPARATUS CODE D-181523 INCLUDES
66E3-25 BLOCK CONNECTOR AND CABLE
B25A 15/DE.
2-55.Paging System Connection to TN763 Circuit Pack
2-123 
Start reading ATT System 25 Installation And Maintenance Manual

Related Manuals for ATT System 25 Installation And Maintenance Manual

All ATT manuals