ATT System 25 Administration Manual

Assigning Buttons to Multiline Terminals
and Attendant Consoles
To assign a feature to a
1     From the Main Menu prompt, enter 2.
button on a multiline
voice terminal or2     At 
PDC =, enter the PDC of the voice terminal or
attendant console, beginattendant console.
with this step:
3     At 
Action =, enter 100.
4     At 
Data =, enter the button number (see Tables 10-1
through 10-7) you are assigning the feature to.
To complete a button assignment, find the feature you want
to assign from the list...

To assign an Automatic1     At Action =, enter 101.
Answer Button (AUTO
ANS):2     At 
Data =, enter 21.
To assign an Automatic
Intercom button (AUTO
ICOM) (this is a two-
station feature):1     At 
Action =, enter 101.
2     At 
Data =, enter 8.
3     You see the prompt, 
Action = 102.
4     At Data =, enter the called station’s PDC.
5     You see the prompt, 
Action = 103.
6     At Data =, enter the called station’s Automatic Intercom
button number.
NOTE: Use with caution for the Cordless Phone.
To...

To assign a Call1     At Action =, enter 101.
button (CALL):
2     At 
Data =, enter 40. †
To assign a Group
Coverage “Receiver”
button (COVER-GRP):1     At 
Action =, enter 101.
2     At 
Data =, enter 10. ‡
3     You see the prompt, 
Action = 102.
4     At Data =, enter a coverage group number (1 - 32).
5     You see the prompt, 
Action = 103.
6     At Data =, enter 1 to enable ringing (strongly
recommended), 0 otherwise.
To assign an Individual1     At 
ActIon =, enter 101.
Coverage “Receiver”
button...

To assign a Coverage1     At Action =, enter 101.
Message Waiting
button (COVER
MSG):2     At 
Data =, enter 6. †
To assign a Transfer to1     At 
Action =, enter 101.
Data button (DATA):
2     At 
Data =, enter 9.
3     You see the prompt, 
Action = 102.
4     At Data =, enter the DDC of the associated data station.
To assign a Directory1     At 
Action =, enter 101.
button (DIRECTORY):
2     At 
Data =, enter 39. ‡
To assign a Direct Station1     At 
Action =, enter 101.
Selection button (DSS):
2...

To assign a Direct
Facility Access button
(FACILITY):1     At Action =, enter 101.
2     At 
Data =, enter 2.
3     You see the prompt, 
Action= 102.
4     At Data =, enter the facility access code.
To assign Flexible Direct1     At 
Action =, enter 101.
Station Selection button
(FLEX DSS):2     At 
Data =, enter 13.
To assign an Inspect
button (INSPECT):1     At 
Action =, enter 101.
2     At 
Data =, enter 28. ‡
To assign a Last Number
Dialed button (LAST #
DIALED):1     At 
Action =, enter 101.
2...

To assign a Station-to-
Station Message Waiting
button (MSG WAIT) (this
is a two-station feature):1     At Action = , enter 101.
2     At 
Data = , enter 5.
3     You see the prompt, 
Action = 102.
4     At Data =, enter the PDC of the other station.
5     You see the prompt, 
Action = 103.
6     At Data =, enter the (MSG WAIT) button number
at the other station.
To assign a Next button
(NEXT):1     At 
Action =, enter 101.
2     At 
Data =, enter 41. ‡
To assign a Personal Line1     At 
Action =, enter...

To assign a Scroll button
(SCROLL):1     At Action =, enter 101.
2     At 
Data =, enter 34. ‡
To assign a Send All1     At 
Action =, enter 101.
Calls button (SEND ALL
CALLS):2     At 
Data =, enter 11. †
3     You see the prompt, 
Action = 102.
4     At Data =, enter 1 to enable single-ring reminder,
0 otherwise.
5     You see the prompt, 
Action = 103.
6     At Data =, assign calls (ringing) to be sent to bridged
and/or coverage stations:
0 = to bridged stations
1 = to coverage stations
2 = to both...

To assign a System
Access button (SYS
ACC):1     At Action =, enter 101.
2     At 
Data =, enter 36. †
3     You see the prompt, 
Action = 102.
4     At Data =, enter a ringing option:
0 = no ring
1 = immediate ring
2 = delayed ring
The default is 1 (for defaulted System Access buttons).
To assign a System
Access-Originate
Only button
(SYS ACC-O):1     At 
Action = , enter 101.
2     At 
Data = , enter 1. †
Assigning Attendant-Console-Specific Buttons
Button Default Tables for multiline voice terminals,...

To complete a button assignment, find the feature you want
to assign from the following list. Enter the button function
code after the 
Action = 101 prompt. Additional actions, if
any, are described. Repeat this procedure (beginning with
Action = 100) for each button you want to assign.
To assign an Attendant1     At 
Action =, enter 101.
Message Waiting button
(ATT MSG):2     At 
Data =, enter 19. ‡
To assign a Night Service1     At 
Action =, enter 101.
button (NIGHT):
2     At 
Data =, enter 17.
3...

Administering Direct Group Calling Groups
This section tells you how to add DGC groups, assign access codes to DGC groups, and add
and remove DGC group members. Keep the following considerations in mind as you
administer DGC groups:
n     You can assign a maximum of 32 DGC groups; therefore, target values (i.e., your
response to the DGC = prompt) will be a number from 1 through 32.
n     Each group can have a maximum of 20 members.
n     A station can be a member of only one DGC group. If you attempt to...