ATT DEFINITY Communications System Generic 3, Installation, Administration, And Maintenance Of CallVisor, ASAI Instructions Manual

Appendix E: Sample Customer Configurationsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
C. You will be on the Brouter Administration screen when done.
Press 
EXIT to return to the Main Menu.
4. Reboot the system as follows.  On the Main Menu, select
Maintenance and then Reset System. When the Reset System
screen appears, select Reboot System.
Administer the Client/Server:
1. Administer the client host name (
lgateclient in this example), IP
address (
135.20.1.2 ) in this example, and subnet mask
(...

Appendix E: Sample Customer Configurationsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Example 3. Multiple Secure LANsbbbbbbbb
DEFINITY LAN
System
Gateway 2
C3
Host name = lgateserver
IP address = 135.20.1.1
Subnet mask = 255.255.255.0
IP address = 135.20.1.200
Subnet mask = 255.255.255.0
C2
Host name = client 3
IP address = 135.20.3.1
Subnet mask = 255.255.255.0
Default gateway = 135.20.1.100
(The route to 135.20.3 network
is 135.20.1.200.)
Default
C1Host name = client 1
IP address = 135.20.2.1...

Appendix E: Sample Customer Configurationsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
C. Access the Add Host screen again and do the same for
clients 2 and 3 (C2 and C3).
D. You will be on the Local Host Table screen when done.  Exit
the screen to return to the TCP/IP Administration Main
Menu.
3. Administer the brouter as follows. On the Main Menu, select
Brouter Administration.
A. Delete the default entry.
B. Press 
ADD to access the Add Client Link screen.  Add an
entry for client 1 on the...

Appendix E: Sample Customer Configurationsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
For this example, you would enter:
DESTINATION TYPE  GATEWAY
135.20.3 NETWORK 135.20.1.200
When you press 
ENTER , the Network Routing Table screen
reappears.  Exit until you reach the Main Menu.
Administration of Each Client (C1, C2, and C3):
1. Administer the client name, IP address, and subnet mask (if not
already done).
2. Add the DEFINITY LAN Gateway system assembly (
lgateserver in
this example) to the...

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Appendix F: Returning the
Application to its Original State
F
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
This appendix details how to return the system to its original state if it should
crash.
1. Make sure the administrative/maintenance terminal is physically
connected to Main/Port A on the TN2208.
2. Insert the original DEFINITY LAN Gateway tape that came with the
system into the system assembly and close the lever.
3. Press the BACK, NEXT/NO, and...

Appendix F: Returning the Application to its Original Statebbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
7. Type 2 and press Return . The following prompt appears:
Enter Tape Device (0-6)(Default = 1)
8. Press Return . The following messages and menu appear:
MFB Board Diagnostics PASSED
Transferring To Software
Copyright (c) 1992 AT&T
All Rights Reserved
0: Exit
1: Initialize Disk
2: Modify Partition Map
3: Copy Generic Partitions
4: Additional Commands
Enter option: 
9. Type 1 to initialize the...

Appendix F: Returning the Application to its Original Statebbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
11. Type 3 to copy file partitions.  The following prompt appears:
Enter SCSI ID of Disk (default 0):
12. Press Return to accept SCSI ID 0.  A screen similar to the following
appears:
Copy generic data from tape to disk
Changing  partition size from 15624 to 40000.
The login prompt appears when the restore procedure is complete.
Issue 1  January 1996   
F-3 

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Appendix G: Project Manager
Worksheet
G
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
This appendix contains a worksheet for the AT&T Project Manager to use to
assist in the customer installation.  The on-site system technician uses the
networking information on this worksheet during installation.
Issue 1  January 1996   
G-1 

Appendix G: Project Manager Worksheetbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Worksheet G-1: Gather Networking
Information
bbbbbbbb
 Date ___________________________
 Prepared By ___________________________
 Contact Telephone Number ___________________________
The basic LAN addressing information you supply here will be used by the on-
site systems technician during installation.
Field Default Desired
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Glossary
GL
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
AdjunctSee Application.
ApplicationA process on a client computer that requests and receives
ASAI services and capabilities through a program library or
network service. The terms ``application and ``adjunct are
sometimes used interchangeably. 
See also ASAI
Application.
ASAIAdjunct Switch Application Interface (ASAI).
1. The AT&T recommendation for Computer Telephony
Integration (CTI) based on the...