ATT DEFINITY Communications System Generic 3, Installation, Administration, And Maintenance Of CallVisor, ASAI Instructions Manual

Maintenancebbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
9. If either drive is to be replaced, the mounting bracket from the bottom of
each will have to be removed and reattached to the drive.  (Note the four
screws which attach the bracket to the drive.)
To mount either drive:
1. Ensure that the EMI shield is snapped into place across the tape drive.
2. First plug the power and SCSI bus cables into the drive.
3. Position the drive on the Alarm Board, and slide the two retaining pins into
the drive...

Maintenancebbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
MT2ST/N50 Tape Drivebbbbbbbbbbbbbbb
The MT2ST/N50 3.5-inch SCSI tape drive is used on the DEFINITY LAN
Gateway system. Figure 4-8 shows the jumper connections that select options to
allow the drive to be accessed.
bbbbbbbbbbbbbbbbbbbbb
1
2
1234 49
50
J1 Interface
Connector
(PCBA CL)
RA1 (under)
Strap
PCBA CL
RA2 (under)
J2 Power Supply
Connector
(PCBA CL)
S3    S2    S1    S0
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Figure 4-8.  M2ST/N50 Tape Drive...

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Appendix A: PBX Carrier
Configuration Worksheets
A
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
This appendix contains worksheets helpful in installing the DEFINITY LAN
Gateway system.  Worksheet A-1 is used to obtain an inventory of your present
circuit pack arrangement in the PBX.  Worksheet A-2 is for help in determining
how to rearrange these circuit packs to ``free up five slots for the DEFINITY LAN
Gateway system assembly.  Worksheet A-3 is for...

Appendix A: PBX Carrier Configuration Worksheetsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Worksheet A-1: Port Slot Assignments
(Before Carrier Arrangement)
bbbbbbbb
 Date ___________________________
 Prepared By ___________________________
 Contact Telephone Number ___________________________
Complete the following worksheet to indicate how circuit packs are currently
arranged in the PBX carrier.
On this worksheet, the slots are numbered as seen from the 
front of the carrier,
with slot 1 on the...

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Appendix B: Supported
Terminals and Modems/Option
Settings
B
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
This appendix contains:
a worksheet for use in determining what terminals and modems you will
use with the DEFINITY LAN Gateway system and
information on option settings.
Issue 1  January 1996   
B-1 

Appendix B: Supported Terminals and Modems/Option Settingsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Worksheet B-1: Terminals/Modemsbbbbbbbb
 Date ___________________________
 Prepared By ___________________________
 Contact Telephone Number ___________________________
To the AE:
Complete this worksheet with the customer before configuring and ordering the
DEFINITY LAN Gateway system.
Options Terminal 1 Terminal 2bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

Appendix B: Supported Terminals and Modems/Option Settingsbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Option Settingsbbbbbbbb
Set the options listed below to the corresponding setting for your terminal. Refer
to the manual for your terminal for available options and the procedure to set
them.
Table B-1.  Terminal Option Settings
bbbbbbbbbbbbbbbbbbbbb
Option Setting
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Appendix C: Ordering
Information
C
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
This appendix contains a list of Price Element Codes (PECs) and comcodes for
primary and optional components comprising the DEFINITY LAN Gateway
system.
Complete Systembbbbbbbb
Table C-1.  Identifiers for Complete Systembbbbbbbbbbbbbbbbbbbbbbbb
Description PEC
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb...

Appendix C: Ordering Informationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Primary Equipmentbbbbbbbb
Table C-2.  Identifiers for Primary Hardware and Softwarebbbbbbbbbbbbbbbbbbbbbbbb
Description PEC Comcode, Qty Notes
ED/H/J Drawing
c c c c
c c c c
c c c c
c c c c
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
TN2208 (Multi-
Function Board)107 083...

Appendix C: Ordering Informationbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Table C-2.  Identifiers for Primary Hardware and Software  (continued)bbbbbbbbbbbbbbbbbbbbbbbb
Description PEC Comcode, Qty Notes
ED/H/J Drawing
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbc c c
c
c c c
c
c c c
c
c c c
c
D8W Modular Wall
Cord2725-07S 103 786 828 1 Must be...