AT&T Htc Tilt 2 User Manual

							
Camera and Multimedia   11

Note   If you have previously opened Windows Media® Player and searched for media on your computer, you are not prompted to search your computer in step .
3. On the Device Setup dialog box, enter a name for your device and click Finish.
Note If you installed a storage card that has a capacity of more than 4GB and your entire library can fit into the storage card, Windows Media Player will automatically synchronize your music files. The device also needs to be set to Disk Drive mode for Windows Media Player to automatically synchronize.
4. On the left panel of Windows Media® Player, right-click the name of your device and click Set Up Sync.
Note To set up media synchronization on a storage card, right-click Storage Card in the left panel of Windows Media® Player, then click Set Up Sync.
5. Select the playlist(s) that you want to sync between your computer and device, then click Add.
Note On the Device Setup dialog box, make sure that the Sync this device automatically check box is selected.
6. Click Finish.
The files begin synchronizing to your device. The next time you connect your device to your computer while Windows Media® Player is running, synchronization will start automatically.
To manually synchronize content to your device1. If you have not set up media synchronization between your device and computer, follow steps 1 to  in “To automatically synchronize content to your device”.
2. Click the Sync tab on the Windows Media® Player of your computer. Select a Playlist or a Library on the left panel of the Windows Media® Player.
3. From the Content List, drag the media files that you want to sync to your device and drop them to the Sync List. 
						

							
1  Camera and Multimedia

Playlists and Library ListSync ListContent List
4. Click Start Sync to start synchronizing the selected files to your device.
Notes • Use Windows Media® Player 11 or higher on your computer to synchronize media files to your device.
 • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help.
Creating playlistsCreate a new playlist by saving the current Now Playing playlist and giving it a new name.
To save a new playlist1. If you are not on the Library screen, tap Menu > Library.
2. Tap to select a category (for example, My Music or My Playlists). 
						

							
Camera and Multimedia   1

3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list. Repeat this step until you have added all desired media files to the Now Playing list.
Note  You cannot select multiple files simultaneously.
4. After adding the media files, tap Menu > Now Playing.
5. On the Now Playing screen, tap Menu > Save Playlist.
6. Enter the playlist name, then tap Done.
7. To play back the playlist you created, tap My Playlists in the Library, select your playlist, then tap Play.
TroubleshootingFor troubleshooting information, visit http://www.microsoft.com/windowsmobile/en-us/help/more/windows-media-player.mspx 
						

							
14  Camera and Multimedia

11.4  Using Audio Booster
Audio Booster optimizes sound by providing an audio equalizer for a better listening experience. To use Audio Booster, connect the supplied wired headset to your device.
To open Audio BoosterTap Start > Tools > Audio Booster.
13
2
4
5
1Enable or disable the equalizer.
2Apply the modified settings.
3Choose the equalizer preset to use.
4Drag the sliders to adjust the frequency.
5Exit Audio Booster without applying the modified settings, or save or delete preset equalizer settings.
To create a custom equalizer preset1. Adjust the frequency bands to your desired values by dragging the equalizer controls.
2. When finished, tap Menu > Save as Preset.
3. Enter a preset name and then tap Done. The equalizer preset is added to the preset list box.
Note To delete a custom equalizer preset, select it on the preset list box and then tap Menu > Delete Preset. You cannot delete pre-installed equalizer presets. 
						

							
Camera and Multimedia   15

11.5  Using FM Radio
FM Radio lets you to listen to FM radio stations on your device. Since FM Radio uses the provided stereo wired headset as the antenna, connect the headset first to the earphone jack of your device before you open the program.
To open FM RadioTap Start > Tools > FM Radio.
The first time you open FM Radio, it automatically scans for available FM stations, saves them as presets, and plays the first FM station found. For information about saving favorite stations as presets, see “Saving presets.“
1FM Radio status2FM radio frequency3Search the FM band for the next lower FM station.4Fine tune the radio frequency by -0.1 MHz.
5Select headset or speaker audio output.
6Turn off FM radio.7Station preset number (if you saved the station as preset)8Radio signal strength9Select mono or stereo audio.10Search the FM band for the next higher FM station.11Fine tune the radio frequency by +0.1 MHz.12Turn the sound on or off.13Preset FM stations. Tap a station to tune in.14Set FM Radio options, such as Scan and Save, mute the audio, and select the audio output.
1
10
9
3
6
2
4
8
7
11
12
13
14
5
Tip  Press the VOLUME UP and VOLUME DOWN buttons on the side of the device to adjust the volume. 
						

							
Saving presetsSave favorite FM stations as presets so you can easily access them. You can save up to 0 preset radio stations. Radio stations that are saved on Presets 1 to 6 can be accessed on the FM Radio screen.
To save FM stations as presets1. Tune in to the desired FM frequency, and then tap Presets.
2. On the Presets list, tap  that appears on the desired preset number where you want to save the FM station.
Tip Tap  to remove a favorite FM station from the list.
3. When done, tap OK.
To listen to a preset FM stationOn the FM Radio screen, tap the station preset button. If the station preset button is not on the screen, tap Presets, then tap the station you want to listen to.
Minimizing or turning off FM RadioWhen you tap  on the FM Radio screen, the program continues to run in the background and allows you to continue listening to the radio while you use other programs. To turn off FM radio, tap  on the upper right corner of the FM Radio screen. 
						

							
12.1  Managing Programs
Launching a programOn the Home screen, slide to the Programs tab, tap All Programs, and then tap the program you want to open. To view more programs, scroll down the screen by swiping your finger upward.
Installing a programYou can install or uninstall additional programs. Your device does not allow you to uninstall most of the preinstalled programs.
Note Before you purchase additional programs, make sure that they are compatible with your device.
Before you launch the program installer, check first whether the installer can directly run on Windows Mobile or needs to be run on a computer.
To install a program directly on your device1. If the installer is a .cab file, directly download or copy it to your device.
2. On your device, open File Explorer and navigate to the installer file.
3. Tap the file to launch the installer.
Chapter 12  
Programs 
						

							
18  Programs

4. Choose whether to install the program into the main memory or your storage card, if you have the storage card inserted on your device.
5. Wait for the installation to complete.
Note  You may be prompted to restart your device after installation is completed.
To install a program from your computer1. If the installer is an .exe file such as Setup.exe, most likely, the installer needs to be run on a computer. Download or copy it to your computer.
2. Connect your device to your computer using the USB cable, and then double-click the installer file on your computer to launch the installer.
3. Follow the on-screen instructions on your computer and your device to complete the installation.
To uninstall a program1. Tap Start > Settings > System > Remove Programs.
2. In the Programs in storage memory list, select the program you want to remove, and then tap Remove. 
						

							
Programs  19

12.2  Contacts
Contacts is your address book for people and businesses you communicate with. You can add Outlook contacts from your device or synchronized with your PC or the Exchange Server, SIM contacts stored on the SIM card, or Windows Live™ contacts.
Note You can only add Windows Live™ contacts after you have set up Windows Live™ on your device. To set up Windows Live™, tap Start > Windows Live > Sign in to Windows Live, and then follow the on-screen instructions.
To open the Contacts screenTap Start > Contacts.
Adding new contacts
To add a contact on your device1. On the Contacts screen, tap New, select Outlook Contact, and enter the contact information.
2. In the File as field, choose how you want the contact name to appear in the contact list.
3. To add a photo of the contact, tap Select a picture, and then select the picture file or tap Camera to take a photo of the contact.
4. To assign a ring tone to the contact, tap the Ring tone field, scroll through the list of tones, then select a desired tone.
5. When finished, tap OK.
Tip To edit contact information, tap the contact name and then tap Menu > Edit.
To add a contact to your SIM card1. On the Contacts screen, tap New, then select SIM Contact.
2. Enter a contact name and phone number, and then tap OK. 
						

							
0 Programs

Tip  You can also use the SIM Manager to add and edit contacts on your SIM card. For more information, see “SIM Manager” in this chapter.
Organizing and searching contacts
To group similar contactsFor easier contact management, you can group contacts by assigning them into categories.
1. Create a new Outlook contact or edit an existing Outlook contact.
2. Tap Categories.
3. Select a preset category such as Business or Personal, or tap New to create your own category.
4. When finished, tap OK.
To find a contact on your deviceThere are several ways to find a contact when your contact list is long:
Begin entering a contact name in the provided text box until the contact you want is displayed.•