Asus S62f Service Guide
Have a look at the manual Asus S62f Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 41
Assembly procedure
4. Install the LCD panel and secure 2 screws (M2.5*4L (K)) & 4 screws (M2.5*6L
(K)) to secure it.
M2.5*4L
M2.5*6L
5. Connect the LCD cable.
6. Combine the LCD bezel and LCD Cover properly and press on all four edges\
until
them snap into position.
3 - 6](http://img.usermanuals.tech/thumb/8/59891/w64_asus-s62f-service-guide-40.png "Page 41
Assembly procedure
4. Install the LCD panel and secure 2 screws (M2.5*4L (K)) & 4 screws (M2.5*6L
(K)) to secure it.
M2.5*4L
M2.5*6L
5. Connect the LCD cable.
6. Combine the LCD bezel and LCD Cover properly and press on all four edges\
until
them snap into position.
3 - 6")
Assembly procedure
4. Install the LCD panel and secure 2 screws (M2.5*4L (K)) & 4 screws (M2.5*6L
(K)) to secure it.
M2.5*4L
M2.5*6L
5. Connect the LCD cable.
6. Combine the LCD bezel and LCD Cover properly and press on all four edges\
until
them snap into position.
3 - 6
Assembly procedure
7. Secure74 screws (M2.5 x 6L) on LCD front bezel then paste 7 rubber pads above.
M2.5*6L
Bottom Case Module BOTTOM
CASE
MODULE The illustrations below show ho w to assembly the Bottom case module. The module
contains Bluetooth boar d, speaker cable.
Assembling Bottom case Module BOTTOM
CASE ASSEMBLY
1. Install the speaker mo dule on the bottom case.
3 - 7
Assembly procedure
2. Install the Bluetooth board on the bottom case.
3. Connect the Bluetooth cable and lay it through the locking trench on bottom case.
Motherboard MOTHERBOARD
The illustrations below show how to asse mble and install the motherboard of the
notebook.
MOTHERBOARD
ASSEMBLY
1. Install the modem board and se cure 2 screws (M2.5*3L (K)).
M2*3L
3 - 8
Assembly procedure
2. Connect the modem cable and paste 4 pieces of tape to fix the cable.
3. Install the TPM board and secure 1 screw (M2*3L (K)) to secure it.
M2*3L
4. Install the IO bracket and use a single-slotted screwdriv er to secure 2 screws HEX
5mm.
3 - 9
Assembly procedure
5. Secure 1 screw (M2*3L (K)) on the IO bracket to secure it.
M2*3L
6. Connect the Bluetooth & Speaker cables, before install the Motherboard to the
bottom case.
Bluetooth cable
Speaker cable
7. Combine the Motherbo ard and the bottom case.
8. Remove 2 screws for CRT on the ri ght side by a spacer screwdriver.
3 - 10
Assembly procedure
9. Secure 2 screws (M2.5*4L (K)) to secu re the motherboard.
Top Case Module
TOP CASE
MODULE
The illustrations below show how to assemb le and install the top case module of the
notebook.
1. Install the touc hpad on the top case.
TOP
CASE
ASSEMBLY
2. Install the touchpad bracke t and secure 5 screws (M2.5*4L (K)) to secure it.
M2.5*4L
3 - 11
Assembly procedure
3. Connect the touch pad FFC and paste 1 piece of tape.
4. Connect the LANCH board cable.
5. Install the LANCH board and secu re 2 screws (M2.5*4L (K)).
M2.5*4L
3 - 12
Assembly procedure
1. Combine the Top case module and LCD module.
2. Secure 2 screws (M2.5*6L (K)) to fix the hinge.
1. Combine the bottom ca se from the top case.
TOP CASE
MODULE
ASSEMBLY
M2.5*6L
BOTTOM CASE
ASSEMBLY
3 - 13
Assembly procedure
2. Before secure the bottom case, let the cable and ant ennas through in the hole.
Inverter & camera cable Antenna
3. Secure 15 screws (M2.5*6L (K)) and 1 screw (M2.5*4L) (K)) to secure the bottom
case.
4. Lay the antennas through the locking trench on bottom case
M2.5*6L
M2.5*4L
3 - 14
Assembly procedure
5. Connect the Coaxial & inverter cable and lay the cables through the locking trench
on bottom case.
Coaxial cable
Inverter cable
6. Secure 1 screws (M2*3L (K)) to secure cables.
I
M2*3L
7. Turn over the NB and connect the LA NCH cable and touchpad FFC on top case.
LANCH cable
Touchpad FFC
3 - 15