Asus S62f Service Guide
Have a look at the manual Asus S62f Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Disassembly procedure
2. Use a pair of tweezers to remove both hinge Cover.
3. Disconnect the LANCH cable and touchpad FFC on the top case.
LANCH cable
Touchpad FFC
4. Turn over the NB and remove 1 screws (M2*3L (K)).
I
M2*3L
2 - 10
Disassembly procedure
5. Disconnect the Coaxial & inverter cable.
Coaxial cable
Inverter cable
6. Arrange the Coaxial & inverter cable and antenna on the bottom case.
BOTTOM
CASE
REMOVAL
7. Remove 15 screws (M2.5* 6L (K)) and 1 screw (M2.5*4L) (K)) on the bottom case.
M2.5*6L
M2.5*4L
2 - 11
Disassembly procedure
8. Before separate the bottom case, remove a little bit bottom case and let the cable
and antennas through out of hole .
Inverter & camera cable Antenna
9. Separate the bottom ca se from the top case.
10. Remove 2 screws (M2.5*6L (K)) on both hinge.
M2.5*6L
2 - 12
Disassembly procedure
11. Separate the LCD module from the Top Case module
12. Remove 2 screws (M2.5*4L (K)) and take away the LANCH board. TOP
CASE
REMOVAL
M2.5*4L
13. Remove the LANCH board cable.
2 - 13
Disassembly procedure
14. Disconnect the touch pad FFC and remove 1 piece of tape then take away the
touch pad FFC.
15. Remove 5 screws (M2.5*4L (K)) and take away the touchpad bracket.
M2.5*4L
16. Take away the touchpad.
2 - 14
Disassembly procedure
Motherboard MOTHERBOARD The illustrations below show how to disassemble and remove the Motherboard.
Removing Motherboard MOTHERBOARD
REMOVAL
1. Remove 2 screws (M2.5*4L (K)).
2. Remove 2 screws for CRT on the ri ght side by a spacer screwdriver.
3. Separate the Motherboard from the bottom case. *Do not remove the
Motherboard yet. The Bluetooth & Speaker cables are still attached.
2 - 15
Disassembly procedure
4. Disconnect the Bluetooth & Speaker cables then take away the Motherboard.
5. Remove 1 screw (M2* 3L (K)) on the IO bracket.
6. Use a single-slotted screwdriver to remove 2 screws HEX 5mm then take away the
IO bracket.
Bluetooth cable
Speaker cable
M2*3L
2 - 16
Disassembly procedure
7. Remove 1 screw (M2*3L (K)) and take away the TPM board .
M2*3L
8. Remove 4 pieces of tapes and disconnect the modem cable.
9. Remove 2 screws (M2*3L (K)) an d take away the modem board.
M2*3L
2 - 17
Disassembly procedure
Bottom Case Module BOTTOM
The illustrations below show how to remove and disassemble the Bottom case module.
The module contains Bluetoot h board, speaker cable. CASE
MODULE
Disassembling Bottom case Module BOTTOM CASE
DISASSEMBLY 1. Disconnect the Bluetooth cable and remove it.
2. Take away the Bluetooth board from the bottom case.
3. Take away the speaker module from the bottom case.
2 - 18
Disassembly procedure
LCD Module LCD MODULE
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, Inverter board, LCD bezel, LCD back cover.
LCD MODULE
DISASSEMBLY Disassembling LCD Module
4. Remove 7 rubber pads and 7 screws (M2.5 x 6L) from LCD module.
M2.5*6L
5. Prying the inside edges of the LCD bezel , and then separates it from LCD back
cover.
2 - 19