Asus S62f Service Guide
Have a look at the manual Asus S62f Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 379 Asus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
S62F Hardware Technical Specification Rev. 1.0 06/03/28
ASUSTeK Confidential Page
57
7.7 LAN Spec
Controller: REALTEK RTL8110SB
Interface: PCI
Compliant to PCI 2.2
Support ACPI , PCI power management
Support for Wake-On-LAN during S3,S4
Integrated IEEE 802.3x 10BASE-T and 100 BASE-TX and Giga LAN compatible PHY and transceiver in one chip
Full duplex and half duplex support at both 10, 100M and 1000Mbps
Low power 3.3V device
128-Pin LQFP package
7.8 Modem spec
Part Number: ASUS RD02-D110
Controller: Conexant software modem
Interface: AC-link
Support Caller ID
Support Ring wake up function
ITU-T V.90 Data Mode with auto-fall back to K56flex and V.34
V.80 Video ready
Modem Data speed: 56Kbps
FAX transfer speed: 14.4Kbps
Modem modulation format: V.90 PCM
S62F Hardware Technical Specification Rev. 1.0 06/03/28
ASUSTeK Confidential Page
58
8 MISCELLANEOUS
8.1 Indicators
Power LED
Feature:
Type:
Color: Show System power status
5
ψ LED
Green
Indication: On: System in ON Mode
Flash (0.3Hz): System in SUSPEND Mode
Off: System in OFF Mode
Location: On board
Charging LED
Feature:
Type:
Color: Show Battery status
5
ψ LED
Orange
Indication: On: Battery in Charging
Flash (0.5Hz): Battery Low
Off: Battery is fully charged or absent
Location: On board
Email LED
Feature: Type:
Color: Show Receive mail status
5
ψ LED
Orange
Indication: On: Receive mail Off: No mail ststus
Location: On board
WLAN & BT LED
Feature: Type:
Color: Show Receive mail status
5
ψ LED
Blue
S62F Hardware Technical Specification Rev. 1.0 06/03/28
ASUSTeK Confidential Page
59
Indication: On: RF on
Off: No ststus
Location: On board
Hard Disk Drive LED
Feature:
Type:
Color:
Location: On: While HDD Read/Write access
5
ψ LED
Green
LED Board (in top of System)
Caps LOCK LED
Feature:
Type:
Color:
Location: On: While CAP Lock activate
5
ψ LED
Green
LED Board (in top of System)
Num LOCK LED
Feature:
Type:
Color:
Location: On: While Num Lock activate
5
ψ LED
Green
LED Board (in top of System)
SCROLL LOCK LED
Feature:
Type:
Color:
Location: On: While Num Lock activate
5
ψ LED
Green
LED Board (in top of System)
8.2 Power cord list
Where Description Vendor
US P-CORD 1.8m 125V 7A UL 2-PIN WS-027-T Well shin
UK P-CORD 1.8m 250V 2.5A UK 2-PIN WS-027-T Well shin
Japan P-CORD 1.8m 125V 7A T-MARK 2-PIN WS-027-T Well shin
S62F Hardware Technical Specification Rev. 1.0 06/03/28
ASUSTeK Confidential Page
60
Europe P-CORD 1.8m 250V 2.5A EUR 2-PIN WS-027-T Well shin
Austria P-CORD 1.8m 250V 2.5A AUS 2-PIN WS-027-T Well shin
South
Asia P-CORD 1.8m 125V 7A WS016+WS027 WS-027-T Well shin
8.3 Safety/ EMI Appliance (TBD):
Agency Approval EMC
CE Mark (Europe)
BCIQ (Taiwan)
EMI
FCC Class B Certified (USA & Canada), VCCI (Japan)
Safety
UL, CSA or CUL, NEMKO-CB (Norway), TUV, CE Mark
(Europe)
Telecomm. FCC Part 68 (USA), DOC (Canada), JATE (Japan),
AUSTEL (Australia), TELE
PERWIT (New Zealand), CTR-
21 (EU)
Other
Requirements Industry
Standards
Compliance SPA Energy Star Complianc
e Designed for Windows
95/98 and Windows NT Logo (Compliance with Microsoft
PC98)
The End………..
BIOS SPECIFICATION
6-1
Software Specifications
Get to know more about theS62Fseries Notebook with a detailed look at
the software specifications.
he information contained in the chapter can be quite useful when you are
troubleshooting the system’s hardware. Each item has its individual usage for you to
understand the software side of the notebook’s architecture.
Chapter
6
T
BIOS SPECIFICATION
6-2
1. General Description
The specification is a guideline for BIOS development on S62F platform. Anyone who needs the information
of system BIOS can read it for reference.
The general device specification, SMBUS, PCI Devices IRQ Routing Table, GPIO pins definition and so on
are subjected to be depicted in this document. Hotkeys implementation and other BIOS features are also
included in.
S62F is an IBM PC/AT compatible notebook PC. The system BIOS of S62F is designed to comply with
following specifications:
. PC2001 System Design Guide
. ACPI 1.0b/2.0
. SMBIOS 2.3.3
. PCI 2.2
. USB 2.0 EHCI
. PXE 2.0
. Intel Geyserville III
. PnP BIOS 1.0a
. ATA Specification
BIOS SPECIFICATION
6-3
2. Summary of Hardware Configuration
2.1 KEY COMPONENTS LIST
The key components used on S62F are listed below.
Table 2-1 Key components
Item Vendor Part’s Name Revision
CPU Intel Yonah 1.6G/1.8G/2.0G/2.16G
North Bridge Intel Calitoga-945GM
South Bridge Intel ICH7-M
VGA Intel Calitoga-945GM
Audio Intel High Definition Audio
Audio Codec Realtek AD1986a
USB Intel ICH7-M (USB2.0)
LAN Realtek RTL8110
Modem Intel ICH7-M
Modem Codec Conexant SmartMC 3S
Cardbus Ricoh R5C841
IEEE1394 Ricoh R5C841
Clock Gen. ICS ICS954310
Thermal ADI ADT7461
KBC ITE ITE8510
Super I/O SMSC 47N217
CMOS CAM Vimicro VC0321
Blue tooth ASUS BT-183
Wireless INTEL Wireless 3945ABG
2.2 PERIPHERAL DEVICES LIST
Table 2-2 Peripheral Devices
Device Description Note
HDD Ultra DMA 33/66/100, 100GB
Keyboard 87-key keyboard supporting(US,JPN,UK)
Pointing Device Built-in Touchpad.
2 click buttons
Support Pad-Lock Function (Hot Key on/off).
Module Bay NA
LED Indicators POWER LED : “ON” at power on, “BLINKING” at suspend.
NUMLock LED : “ON” when numlock is pressed
CAPLock LED : “ON” when capslock is pressed.
SCRLock LED : “ON” When Srclock is pressed
HDD LED : “BLINKING” when HDD accessing
EMAIL LED : “ON” when new E-mail(s) coming.
WIRELESS LED : “ON”, when Wireless lan/Bluetooth activity.
BATTERY LED : “ON” at charging,
“OFF” when a battery is fully charged or there is no battery
“BLINKING”
Battery capacity is below 5%
Ports One VGA port/Mini D-sub 15-pin for external display
Four USB2.0 ports
One TV Out
One Cable In
One Headphone-out/ SPDIF
One Mic-in
One RJ45(LAN)
One RJ11(Modem)
BIOS SPECIFICATION
6-4
One IEEE 1394 B Type Jack
One PCMCIA
One Memory card reader(SD/MMC/MS)
Power Supply AC adapter : Output : 19 VDC, 3.42A, 65W, Input : 100~240V AC, 50/60Hz
universal
Battery Pack :
Main : Li-Ion 6 cells, 14.8V, 4800mAh, 65W battery pack
Run-down life 5.5hrs
Charging time, 2hrs Quick charge 90% (Power off) / 4hrs (Power on)
Battery low will enable the Power Management System under Windows environment.
Enters Save-To-Disk mode automatically if less than 5%
2.3 PCI DEVICES ALLOCATION
The H/W configuration of PCI Devices includes interrupt routing, device IDSEL allocation, device
vendor/device IDs, sub-system/vendor Ids etc.
2.3.1 PCI IDSEL Allocation & IRQs routing
PCI devices allocation and interrupt routing are listed in the table below.
Table 2-3
Device Vendor IDSELBusDev.Fun. INTA INTB INTC INTD
Host Bridge Intel 0 0 0 N/A N/A N/A N/A
VGA Intel 0 2 0 *PIRQA N/A N/A N/A
High Definition Audio Controller Intel 0 27 0 *PIQRA N/A N/A N/A
USB0 Intel 0 29 0 *PIQRH N/a N/A N/A
USB1 Intel 0 29 1 N/A *PIQRD N/A N/A
USB2 Intel 0 29 2 N/A N/A *PIQRC n/a
USB3 Intel 0 29 3 N/A N/A N/A *PIQRA
USB2.0 Intel 0 29 7 *PIQRH N/A N/A N/A
PCI2PCI Bridge Intel 0 30 0 N/A N/A N/A N/A
LPC Bridge Intel 0 31 0 N/A N/A N/A N/A
IDE Controller Intel 0 31 1 *PIRQC N/A N/A N/A
SMBus Controller Intel 0 31 3 N/A *PIRQD N/A N/A
PCIE(802.11) Intel 1 1 0 *PIRQB N/A N/A N/A
CardBus/1394/SD/MS Ricoh AD17 1 3 0/1/2/3/4 *PIRQB *PIRQC *PIRQD N/A
LAN Realtek AD23 1 0 0 *PIRQA N/A N/A N/A
WLAN Intel 2 0 0 *PIRQB *PIRQC *PIRQD *PIRQA
* : Device internal routing
1 : Native mode routes to PIRQA
IRQs Available (Legacy) : 2,3,4,6,7,9,10,11,15
IRQs Available (ACPI) : 2,3,4,6,7,10,11,12,15,20,21,22
2.3.2 PCI Devices Vendor/Device IDs and Sub-System/Vendor IDs
As title, we list some IDs below.
Table 2-4 Vendor/Device IDs & Sub-System/Vendor IDs
Device Vend o r BusDev.Fun.Vendor
ID
Device
ID
Sub-Vendor
ID
Sub-System
ID
Host Bridge Intel 0 0 0 8086h 27A0h 1043h 1297h
VGA Intel 0 2 0 8086h 27A2h 1043h 1252h
VGA Intel 0 2 1 8086h 27A6h 1043h 1252h
High Definition Audio Controller Intel 0 27 0 8086h 27D8h 1043h 1213h
USB0 Intel 0 29 0 8086h 27C8h 1043h 1297h
BIOS SPECIFICATION
6-5
USB1 Intel 0 29 1 8086h 27C9h 1043h 1297h
USB2 Intel 0 29 2 8086h 27CAh 1043h 1297h
USB3 Intel 0 29 3 8086h 27CBh 1043h 1297h
USB2.0 Intel 0 29 7 8086h 27CCh 1043h 1297h
PCI2PCI Bridge Intel 0 30 0 8086h 2448h 1043h 1297h
LPC Bridge Intel 0 31 0 8086h 27B9h 1043h 1297h
IDE Controller Intel 0 31 1 8086h 27DFh 1043h 1297h
SMBus Controller Intel 0 31 3 8086h 27Dah 1043h 1297h
PCIE(802.11) Intel 2 1 0 8086h 4222h 8086h 1000h
CardBus Controller Ricoh 3 1 0 1180h 0476h 1043h 1297h
1394 Ricoh 3 1 1 1180h 0552h 1043h 1297h
SD Ricoh 3 1 2 1180h 0822h 1043h 1297h
MS Ricoh 3 1 3 1180h 0592h 1043h 1297h
LAN Realtek 3 7 0 11ABh 4320h 1043h 11E5h
2.4 PANEL DETECTION AND INITIALIZATION
During POST, the VGA BIOS will automatically detect the LCD panel type through EDID and set
proper parameters for the LCD panel.
2.5 GPE EVENT
The GPE enable register and status register are located at offset 0x2C and 0x28 of PMIO range
respectively. The GPI0~GPI15 could be set to trigger SCI, SMI, or nothing by setting their
corresponding control bits in Dev#0/Func#0/Reg#B8h “GPI Routing Control Register” if being
selected as general purpose input.
Table 2-5 GPE event table
Event GPE
Bit
Source
None-ACPI ACPI
Description
3 USB device Wake Up Wake Up USB Controller 1
4 USB device Wake Up Wake Up USB Controller 2
8 Ring In(PM_RI#) Wake Up Wake Up Modem ring/Cardbus ring
11 PCI_PME# Wake Up /
SMI Wake Up /
SCI PME# of PCI device
12
USB device Wake Up Wake Up USB Controller 3
13 ICH7-M internal device on bus
#0 Wake Up /
SMI Wake Up /
SCI PME# of internal device on bus 0
14
USB device Wake Up Wake Up USB Controller 4
24 EXTSMI# SMI SMI External SMI from KBC ITE8510
28 KB_SCI# N/A SCI SCI# from KBC ITE8510
BIOS SPECIFICATION
6-6
3. Summary of BIOS Requirements
Item Description BIOS Vendor AMI Revision 8.0 Implemented Specification PCI Express 1.0, ACPI 1.0b/2.0, PCI BIOS 2.0, PnP 1.0a, SMBIOS (DMI) 2.3.3, SMBus
BIOS 1.0, PXE 2.0, Quick Boot, BIOS Boot Flag, Enhanced BIOS Services for Disk
Drive, Bootable CD-ROM Format, ATAPI Removable Media Device BIOS, PARTIES,
Intel’s SpeedStep, and so on.
Supported Operating System (O.S.) Windows XP SP2
Boot Block 32 KB boot block is used for initializing DRAM, checking BIOS integrity, decompressing
POST/Run-Time BIOS, and doing crisis recovery of BIOS if necessary.
Crisis Recovery Recover BIOS from a hard disk, a host PC connected to parallel port, or a proprietary debug card of ASUS.
BIOS Update Update BIOS at DOS or Windows, or from a proprietary debug card, or from a host PC via parallel port.
CPU Automatically detect the CPU type and speed; Support CPU host frequency selection. DRAM Support SPD and automatic memory sizing; always shadow VGA BIOS and system BIOS as well as shadow NIC boot ROM by selection.
Cache Always enable L1 and L2 caches. Security Unique password protection for system and HDD; dynamic backdoor (master) password verification.
Display Automatically detect and switch among LCD, CRT, and TV display devices when display-switching combination hot key, Fn+F8, pressed.
Floppy Drive 3 mode floppy supported Hard Disk Support automatic device detection, LBA (28/48 bits) mode for larger capacity HDD, 32-bit PIO transfer, multiple sector transfer, fast PIO mode 1-4, Multiword DMA mode
0-2, Ultra DMA (33/66/100) mode 0-5, SMART function, PARTIES function, and
password protection.
Multiple Boot Boot up an operating system from legacy floppy, IDE Hard Disk / CD-ROM, USB ZIP / CDROM / Floppy / LS-120 & 240 / Hard Disk / Flash Memory Device, or a remote server
via LAN (PXE/INT18 Network Boot).
Plug and Play Support PnP run time service and conflict-free allocation of resource during POST ACPI Support C0, C1, C2/C2E, C3, C4/C4E, S0, S3, S4, & S5 power management modes, control method battery, and proprieta ry on-screen display utility.
SpeedStep(Geyserville III) Support Intel’s applet (rev. 3.x) and Windows XP Native Process Performance Control.
PXE Support PXE LAN boot. Battery Provide control method battery interface for ACPI-enabled O.S., support APM 1.2 “Get
Power Status” function, and calibrate capacity when invoked from setup menu.
AC Power Set AC power ON/OFF trigger conditions and report its state to operating system accordingly.
Keyboard/Mouse Support U.S./Japan/U.K. keyboards, USB legacy keyboard, built-in Glide Pad, and
function hot keys.
PCI / AMC’97 Device Initialize and allocate required system source including IRQ, DMA channel, I/O port, memory range, and primary / subordinate bus number as well as sub-system and
sub-vendor Ids.
Power Management The power management methodology is compliant with ACPI 1.0B/2.0 specifications. The supported power states are:
ƒ Full On
ƒ Stand-by
ƒ Suspend to RAM (STR or S3) on ACPI-enabled O.S. only
ƒ Suspend to Disk (STD or S4) on ACPI-enabled O.S. only
ƒ Soft Off (S5)