ASK Impression 860 User Guide

USER GUIDELCD PROJECTOR40 12 CONNECTORS
The connector ports for the source equipment on the LCD projector are
located on the right hand-side (when facing) of the unit.  The connector
port for the mains power cord is located next to the fuse cabinet.  The
pinouts of all the connector ports is described in this section.Do not connect any devices or cables other than those
supplied with the LCD projector into the connector ports on
the projector unit, even if the connector ports appear identical,
as this...

USER GUIDELCD PROJECTOR41 12.2 MOUSE
This port is used to exchange mouse messages between the projector
and the computer.8 PIN MINIDINFEMALE(FRONT VIEW)1234567812345PS/2 CLOCKRS232 TXDRS232 RTSRS232 RXDRS232 CTS678PS/2 DATAMAC ADBGND 

USER GUIDELCD PROJECTOR42 13 ENVIRONMENTAL STATEMENT
Care has been taken in the manufacture of this LCD projector that
environmental stress and pollution has been minimized.  Where possible,
recyclable materials have been used to minimize the environmental
impact.
There are no special requirements for handling the product.  Should the
LCD module inside the projector become broken for any reason, resulting
in a spillage of liquid and glass fragments from inside the unit, the
following precausions should...

USER GUIDELCD PROJECTOR43 14 FCC STATEMENT
This equipment has been certified to comply with the limits for a Class A
computing device, pursuant to Subpart J of Part 15 of FCC rules. Only
peripherals (computer input/output devices, terminals, printers, etc.)
certified to comply with the Class A limits may be attached to a computer
that complies with Class A limits. When connecting to a peripheral
device, a shielded input/output cable is required to ensure compliance
with FCC rules. The shielded cable that...

USER GUIDELCD PROJECTOR44 15 SERVICE INFORMATIONThis product contains no user serviceable parts, outside the
scope of section  Maintenance. Attempts to modify
mechanics, electronics or optics inside the housing will violate
any warranties, and may be hazardous.If for any reason the product fails to work properly, first check the section
on Trouble-shooting. If the LCD projector still do not work to
specification, please contact your dealer for technical support. Prepare a
list of the symptoms you observe...