ASK Impression 860 User Guide

USER GUIDELCD PROJECTOR10 4 MAIN FEATURES
The unit employs the following important features that in total provide
you with a highly functional and powerful projector:
· High brightness 575 Watt illumination system
· 640 x 480 to 1152 x 870 image resolution
· 3 x RGB input/output connectors
· 16.7 million colors
· Infrared remote mouse
· On screen display (OSD)
· User’s source settings memorized
· Low noise cooling system
· False light blocking
· 4m (13 ft) VGA cable with Y-split 

USER GUIDELCD PROJECTOR11 5 SUPPLIED MATERIAL
5.1 WHEN YOU OPEN THE LCD PROJECTOR PACKAGE
A complete set includes the following components :1.LCD Projector6.Mouse Adapter PC (Y-Split)
2.VGA Cable with Y-split7.Power Cord
3.MAC monitor adapter8.Remote Control
4.MAC computer adapter9.Batteries
5.Mouse Cable10.User Guide
5.2 OPTIONAL MATERIAL
Optional cables, adapters and accessories are available. Consult your
dealer for further information. 

USER GUIDELCD PROJECTOR12 5.3 GLOSSARY
The following terms are used throughout this user guide to identify the
different parts of the LCD projector, or to refer to certain ancilliary items.POWER STATUS INDICATORHANDLE
TOP PANEL KEYBOARDVENTILATION SLATS
POWER ON/OFF SWITCH
HEIGHT ADJUSTMENT RING FOCUSING RING LENS CAPLCD PROJECTOR UNIT
FUSE HOLDER
MAINS POWER PORT
CONNECTOR PANEL 
WITH CONNECTOR PORTS IR RECEIVER PROJECTION LENS 
DESKTOP MOUSE
REMOTE CONTROL 

USER GUIDELCD PROJECTOR13 6 SETTING UP THE LCD PROJECTOR
6.1 SAFETY PRECAUTIONSSwitch off all equipment before connecting together the
various items.  Be aware of static electricity that may build
up, especially in the dry season and when operating on
synthetic carpets.  Discharge any static electricity by
touching a metallic surface before you start.Do not cover the air inlets in front and on top of the projector
housing, as this will block the cooling.  Also make sure to
place the projector on a flat,...

USER GUIDELCD PROJECTOR14 6.2 ARRANGEMENTS IN THE PROJECTION ROOM
The LCD projector should be placed on a table, or other stable hard
surface, at the distance required to give the desired size of projected
image on the wall.4.8m / 187 4.0m / 156 3.0m  / 117 2.0m / 78 1.3m / 50.7                           Projector-Screen Distance3.53m / 138 2.92m / 114 2.15m / 83.9 1.4m / 54.6 0.86m / 33.5              Diagonal Screen SizeMAX        MIN
(Actual projection distances and screen sizes may vary)
The image...

USER GUIDELCD PROJECTOR15 6.3 SELECTING ADDITIONAL ADAPTERS AND CABLES
6.3.1 FOR YOUR COMPUTER SOURCE(S)
You may have a computer source which requires an additional adapter to
connect between the source and the VGA cable with Y-split.  A set of two
MAC adapters is supplied in your delivery package.COMPUTERADAPTERVGANone requiredMAC II and PowerMACSet of 2 MAC adapters6.3.2 FOR VIDEO SOURCES
An external video adapter is required to allow composite and super-video
sources to be connected to the LCD...

USER GUIDELCD PROJECTOR16 6.4 MAKING THE CABLE CONNECTIONS
1. Place the projector on a stable, hard surface, at the desired distance
from the projection screen.2. Connect the source equipment to the connector ports of the LCD
projector, preferentially into the Source 1 connector port (This is the
default source connector port):
- PC:Insert the end of the VGA cable marked ‘LCD’ into Source 1
connector port orthe next available source port. Connect the
connector marked ‘Monitor’ onto your monitor cable,...

USER GUIDELCD PROJECTOR17 - MAC:Insert the end of the VGA cable marked ‘LCD’ into Source 1
connector port or the next available source port. Connect the
MAC-Monitor adapter onto the short cable section and then
attach your MAC monitor to it. Connect the MAC-Computer
adapter onto the output port on your Macintosh computer unit,
and then connect the VGA cable connector marked ‘VGA’ to it.
If you do not intend to use the monitor then just leave the short
cable section unconnected and the MAC monitor...

USER GUIDELCD PROJECTOR18  
3. Connect an external video adapter and video sources if required.
 
4. Connect one end of the mouse cable marked ‘LCD’ into the mouse
port on the LCD projector and the other end marked ‘MA’ (Mouse
Adapter) into the appropriate mouse adapter, determined by which
mouse type you are using. 
5. Ensure the ventilation slats on the LCD projector are not obstructed,
then apply mains power to the projector. Remember to switch on the
unit at the Power ON/OFF switch!ON       OFF 

USER GUIDELCD PROJECTOR19  
6. Apply mains power to the various items of source equipment.
Your LCD projector is now fully connected up.  Before use for your
presentation, refer to the next section on Image Adjustments to attain the
highest quality of projected image.
6.5 IMAGE ADJUSTMENTS
The infrared remote control is the main user interface by which the
device settings are adjusted.  The remote control keys are used to adjust
the settings of the LCD projector correctly so as to achieve the best...