Apple xserve early 2009 User Manual
Have a look at the manual Apple xserve early 2009 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Xserve (Early 2009) Take Apart — ID Tab 161 2010-06-28 First Steps Remove: • Power Supply • Top Cover • PCI-E Riser Cards • PCI-E Expansion Cards • Backplane to Logic Board I/O Cable • Logic Board Note: DO NOT remove the processor heat sink or processor from the logic board when replacing only the ID tab. Tools • ESD wrist strap and mat ID Tab
Xserve (Early 2009) Take Apart — ID Tab 162 2010-06-28 Removal 1 Gently grasp the ID tab and pull up on it to disengage it from the channel in the enclosure. 2 Pull the ID tab through the slot in the rear panel to remove. Replacement 1 Pull the ID tag into the enclosure through the slot on the rear panel. 2 Gently grasp the ID tab and press down on it to engage the channel in the enclosure.
Xserve (Early 2009) Take Apart — Enclosure 163 2010-06-28 First Steps Remove: • Apple Drive Module • Power Supply • Top Cover • Solid State Drive • Solid State Drive Cable • Solid State Drive Carrier • PCI-E Riser Cards • PCI-E Expansion Cards • Optical Drive • Airflow Duct • Fan Array • Front Panel Board • Backplane-to-Logic Board Cable • Optical Drive Cable • Locking Mechanism Rod • Front Panel Board Cable • Drive Interconnect Backplane • Power Distribution Board Cable • Power Distribution Board • Logic Board • ID Tab Tools • No tools required Enclosure Important: When replacing the Enclosure, DO NOT remove the processor or heat sink from the logic board. Remove as one piece.
Xserve (Early 2009) Take Apart — Enclosure 164 2010-06-28 Removal 1 Using the first steps, remove all the components from the enclosure. 2 The enclosure should be all that is remaining. Replacement 1 Verify that the ID Tag has been transferred into the replacement enclosure. 2 Replace all the components in the replacement enclosure 3 Verify that all components and cables are securely connected.
© 2009 Apple Inc. All rights reserved. Apple Technician Guide Views Xserve (Early 2009)
Xserve (Early 2009) Views — Exploded View 166 2010-06-28 Exploded View Top Cove r 92 2-84 79 Fr ont Pane\f Board Cab\f e 92 2-89 \b1 Airf\fow Du ct 92 2-89 \b7 Fan Arra y 076-13 39 Back p\fane-to-L ogic Board Cab\f e 92 2-89 \b2 Expansion Card s 66 1-4 19\b 66 1-464 1 MXM Video Card 66 1-\b068 Riser Card PCI-E 1 6X 661-\b09 4 U-DIMMs 1 GB 66 1-\b0\b0 2 GB 66 1-\b0\b1 4 GB 66 1-\b0\b2 Power Distribution Bo\aar d 92 2-89\b4 Pr ocessor Heatsink 076-1342 Pr ocessor 2.26 GHz 66 1-\b06\b 2.66 GHz 66 1-\b06\b 2. 93 GHz 66 1-\b066 Power Distribution Bo\aard Cab\fe 922-89\b 3 Drive Interconnec t Backp\fane 661-\b0\b 8
Xserve (Early 2009) Views — Exploded View 167 2010-06-28 Optical Drive Cable 922-89 47 Optical Drive Super 661-48 13 Hard Drive 160 GB 661-4840 1 TB 661-481 0 2 TB 661-5451 Lo gic Board 661-5062 - Single Pr oc 66 1-5063 - Dual Proc Light Pipe Ki t 076-1 287 Fr ont Beze l 92 2-8480 Lo cking Ro d 92 2-8 478 Power Supply , 75 0w 661-5059 Fr ont Panel Board 922-8955 ID Tab 076-13 41 Enclosure 076-13 40 SSD Cable 92 2-8958 SSD Carrier 922-89 59 Solid-State Driv e 12 8 GB 661-5067
Xserve (Early 2009) — Feedback 168 2010-06-28 Feedback We want your feedback to help improve this and future Technician Guides! Please email any comments to: [email protected]