Apple powerbook g4 12 inch 1 33ghz User Manual
Have a look at the manual Apple powerbook g4 12 inch 1 33ghz User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
© 2004 Apple Computer, Inc. All rights reserved. Service Source PowerBook G4 (12-inch 1.33 GHz) Updated October 25, 2005
© 2004 Apple Computer, Inc. All rights reserved. Service Source Take Apart PowerBook G4 (12-inch 1.33 GHz)
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 1 General Information General Information Overview Some of the key features that distinguish this computer from earlier notebook models include: • Faster processor at 1.33 GHz • Cable guides on frame • Latches in battery bay to secure top case
2 - PowerBook G4 (12-inch 1.33 GHz) Take Apart General Information Model Differences The external housing of the PowerBook G4 (12-inch 1.33 GHz) model looks the same as the PowerBook G4 (12-inch DVI) model. Both have a mini-DVI port (shown below). The mini-DVI port is used with an adapter cable to connect the computer to a monitor, television, VCR, or other video device. The adapter cables that can be used with this port include a mini-DVI-to-DVI adapter, a mini-DVI-to-VGA adapter, and a mini-DVI-to-S-Video adapter. To distinguish the PowerBook G4 (12-inch 1.33 GHz) model from previous models, check the processor speed and note the latches in the battery bay. This computer model includes two latches inside the battery bay. These latches help secure the top case to the computer. Refer to the Top Case procedure for more information.
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 3 General Information Tools The following tools are recommended for this computer: • Coin • ESD wriststrap and mat • Small soft cloth • Black stick (or other nonconductive nylon or plastic flat-blade tool) • #0 Phillips screwdriver (magnetized) • #1 Phillips screwdriver (magnetized) • Jeweler’s flat-blade screwdriver • 1.5 mm hex driver • 4 mm socket wrench or needlenose pliers • nonconductive tweezers or needlenose pliers (for replacing a foot or for routing thin cables such as the AirPort antenna cable) Important: To organize the screws you remove from the computer, use a tray with divided compartments (such as a plastic ice cube tray). If doing a complete disassembly, note the screws removed from each location in the computer. Warning: Check the screw lengths before installing the screws. Installing a longer screw in the wrong place can permanently damage the housing or an internal part. Serial Number Location The serial number is located in the battery bay.
4 - PowerBook G4 (12-inch 1.33 GHz) Take Apart Battery Battery Tools This procedure requires the following tools: • Soft cloth • Coin Part Location Preliminary Steps Warning: Always shut down the computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Let the computer cool down for 30 minutes before continuing.
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 5 Battery Procedure Warning: If the computer has been recently operating, allow it to cool down before performing this procedure. 1. Shut down the computer. 2. Unplug the power adapter, phone cord, and any other cables connected to the computer. 3. Turn over the computer and place it on a soft cloth. 4. Use a coin to release the battery lock. 5. Lift the battery out of the battery bay. 6. Install the replacement battery, and reassemble and test the computer.
6 - PowerBook G4 (12-inch 1.33 GHz) Take Apart Feet Feet Tools This procedure requires the following tools: • Foot kit • Tweezers or needlenose pliers • Soft cloth Preliminary Step Before you begin, identify the type of foot that needs replacement. Check the bottom case of the computer, and compare it with the images in this table: Plug Area on Bottom CaseMatching Foot Action Missing plug Not available for replacementDo not perform the foot replacement. Battery plugBattery footContinue with the procedure, matching the foot to the plug on the battery. Case plug Case footContinue with the procedure, matching the foot to the plug on the bottom case. Case plug Case footContinue with the procedure, matching the foot to the plug on the bottom case.
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 7 Feet Procedure Warning: The glue used in this procedure can bond instantly to skin. Do not touch the glue. In the event of contact, review the safety instructions at the end of this document. For additional information, refer to the glue manufacturer: Elmers Products, Inc. Columbus, OH. 43215-3799 www.krazyglue.com 1. Place the computer upside down on a clean, lint-free cloth or other nonabrasive surface. 2. Select a foot from the kit that matches the plug on the bottom case. (Refer to the images shown in the table.) Do not use a foot that does not match. 3. Make sure the plug area on the bottom case is clean. If any portion of the soft rubber foot remains, remove it so that only the hard plastic plug is visible (as shown below). Battery Plug Case Plug Important: Notice the inner ring of the plug. When positioning the foot, make sure the textured plane of the rubber foot fits into the compatible ring in the plug. This ensures a balanced and level fitting.
8 - PowerBook G4 (12-inch 1.33 GHz) Take Apart Feet 4. Warning: GLUE IS AN EYE AND SKIN IRRITANT. BONDS SKIN INSTANTLY. Do not touch the glue at any time. Before opening the glue, review the safety instructions at the end of this document. Important: The glue tube included in the kit is sealed until first use. Do not break the seal until you are ready to use the glue. To break the seal, hold the tube upright and away from you. Place the hollow nozzle cap on the tube and tighten it all the way down. The tube is then ready to dispense the glue through the nozzle cap. 5. Apply one drop of glue to the plug on the bottom case. Do not spread the glue. 6. Using tweezers or needlenose pliers, carefully position the new foot so its textured surface fits into the inner ring of the plug. 7. Using the end of the tweezers or pliers—not your finger—lightly press and hold the foot in place for 30 seconds. 8. Before turning over the computer, allow the glue to set for at least 15 minutes. 9. Discard the tube of glue. SAFETY INSTRUCTIONS: GLUE IS AN EYE AND SKIN IRRITANT. BONDS SKIN INSTANTLY. Contains ethyl cyanoacrylate. Avoid contact with skin and eyes. If eye or mouth contact occurs, hold eyelid or mouth open and rinse thoroughly but gently with water only for 15 minutes and GET MEDICAL ATTENTION. Liquid glue will sting eye temporarily. Solidified glue may irritate eye like a grain of sand and should be treated by an eye doctor. If skin bonding occurs, soak in acetone-based nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull). Contact through clothing may cause skin burn. If spilled on clothing, flush with cold water. Avoid prolonged breathing of vapors. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.