Apple powerbook g4 12 inch 1 33ghz User Manual
Here you can view all the pages of manual Apple powerbook g4 12 inch 1 33ghz User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 1
© 2004 Apple Computer, Inc. All rights reserved. Service Source PowerBook G4 (12-inch 1.33 GHz) Updated October 25, 2005
Page 2
© 2004 Apple Computer, Inc. All rights reserved. Service Source Take Apart PowerBook G4 (12-inch 1.33 GHz)
Page 3
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 1 General Information General Information Overview Some of the key features that distinguish this computer from earlier notebook models include: • Faster processor at 1.33 GHz • Cable guides on frame • Latches in battery bay to secure top case
Page 4
2 - PowerBook G4 (12-inch 1.33 GHz) Take Apart General Information Model Differences The external housing of the PowerBook G4 (12-inch 1.33 GHz) model looks the same as the PowerBook G4 (12-inch DVI) model. Both have a mini-DVI port (shown below). The mini-DVI port is used with an adapter cable to connect the computer to a monitor, television, VCR, or other video device. The adapter cables that can be used with this port include a mini-DVI-to-DVI adapter, a mini-DVI-to-VGA adapter, and a...
Page 5
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 3 General Information Tools The following tools are recommended for this computer: • Coin • ESD wriststrap and mat • Small soft cloth • Black stick (or other nonconductive nylon or plastic flat-blade tool) • #0 Phillips screwdriver (magnetized) • #1 Phillips screwdriver (magnetized) • Jeweler’s flat-blade screwdriver • 1.5 mm hex driver • 4 mm socket wrench or needlenose pliers • nonconductive tweezers or needlenose pliers (for replacing a foot or...
Page 6
4 - PowerBook G4 (12-inch 1.33 GHz) Take Apart Battery Battery Tools This procedure requires the following tools: • Soft cloth • Coin Part Location Preliminary Steps Warning: Always shut down the computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Let the computer cool down for 30 minutes before continuing.
Page 7
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 5 Battery Procedure Warning: If the computer has been recently operating, allow it to cool down before performing this procedure. 1. Shut down the computer. 2. Unplug the power adapter, phone cord, and any other cables connected to the computer. 3. Turn over the computer and place it on a soft cloth. 4. Use a coin to release the battery lock. 5. Lift the battery out of the battery bay. 6. Install the replacement battery, and reassemble and test...
Page 8
6 - PowerBook G4 (12-inch 1.33 GHz) Take Apart Feet Feet Tools This procedure requires the following tools: • Foot kit • Tweezers or needlenose pliers • Soft cloth Preliminary Step Before you begin, identify the type of foot that needs replacement. Check the bottom case of the computer, and compare it with the images in this table: Plug Area on Bottom CaseMatching Foot Action Missing plug Not available for replacementDo not perform the foot replacement. Battery plugBattery footContinue...
Page 9
PowerBook G4 (12-inch 1.33 GHz) Take Apart - 7 Feet Procedure Warning: The glue used in this procedure can bond instantly to skin. Do not touch the glue. In the event of contact, review the safety instructions at the end of this document. For additional information, refer to the glue manufacturer: Elmers Products, Inc. Columbus, OH. 43215-3799 www.krazyglue.com 1. Place the computer upside down on a clean, lint-free cloth or other nonabrasive surface. 2. Select a foot from the kit that...
Page 10
8 - PowerBook G4 (12-inch 1.33 GHz) Take Apart Feet 4. Warning: GLUE IS AN EYE AND SKIN IRRITANT. BONDS SKIN INSTANTLY. Do not touch the glue at any time. Before opening the glue, review the safety instructions at the end of this document. Important: The glue tube included in the kit is sealed until first use. Do not break the seal until you are ready to use the glue. To break the seal, hold the tube upright and away from you. Place the hollow nozzle cap on the tube and tighten it all...