Apple macbook 13 inch aluminum late 2008 User Manual
Here you can view all the pages of manual Apple macbook 13 inch aluminum late 2008 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 171
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Connector Cable 171 2010-06-15 First Steps Remove: • Access door • Battery • Hard drive • Bottom case • Mid wall • Camera cable guide • Optical drive Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Black stick Hard Drive Connector Cable
Page 172
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Connector Cable 172 2010-06-15 Removal 1 Pull straight up on connector to disconnect cable. 2 Peel up cable from top case.
Page 173
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Connector Cable 173 2010-06-15 3 Lift up adhesive tab. 4 Twist strain relief out of top case. Replacement 1 Peel adhesive backing off cable. 2 Press cable so it lays flat in top case. 3 Connect cable to • logic board • top case • hard drive
Page 174
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Fan 174 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick Fan
Page 175
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Fan 175 2010-06-15 Removal 1 Use black stick to disconnect fan cable. 2 Remove 3 screws: • 1 (7-mm) 922-8645 • 2 (5-mm) 922-8644 Caution: Do not touch heatsink: Replacement Note: Install screws in order shown. 3 Tilt up fan.
Page 176
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Keyboard Flex Bracket 176 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver Keyboard Flex Bracket
Page 177
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Keyboard Flex Bracket 177 2010-06-15 Removal 1 Remove 2 (5-mm) 922-8644 screws. 2 Lift out bracket.
Page 178
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Trackpad 178 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Mid wall • Keyboard flex bracket Trackpad Kit 922-9014 includes: • trackpad • black label • 2 metal flexures • 6 tri-lobe #00 screws • 1 tri-lobe #0 set screw Tools • ESD wrist strap and mat • Sticky (Post-It) notes • Black stick • Large tri-lobe #0 screwdriver (922-8991) • Small tri-lobe #00 screwdriver (922-9013) • Magnetized Torx T5 screwdriver Trackpad
Page 179
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Trackpad 179 2010-06-15 Removal 1 Disconnect trackpad flex cable from logic board. 2 Remove 6 small tri- lobe #00 screws from flexures. 3 Remove 1 large tri- lobe #0 set screw. 4 Dispose of old screws; they lose their ability to hold securely if reused.
Page 180
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Trackpad 180 2010-06-15 5 Hold trackpad and press down on edge closest to logic board. 6 Slide trackpad down and back towards keyboard to clear supports in front edge of top case.