Apple macbook 13 inch aluminum late 2008 User Manual
Here you can view all the pages of manual Apple macbook 13 inch aluminum late 2008 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 201
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Heatsink 201 2010-06-15 2 Inject 1/3 of grease on each microprocessor. 3 Important: Connect the thermal sensor. 4 Lower the heatsink over the logic board.
Page 202
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Microphone Cable 202 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Memory • Fan • Keyboard flex bracket • Logic board Caution: Do not strain microphone cable. Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetic Phillips #00 screwdriver • Black stick • Pencil with an eraser Microphone Cable
Page 203
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Microphone Cable 203 2010-06-15 Removal 1 Remove 2 screws: • 7 mm (922-8645) • 5.5 mm (922-8658) 2 Remove LVDS cable guide. Replacement Note: When installing the LVDS cable guide, seat the locator pin first. 3 Use black stick to pry up microphone gasket. 4 Remove any adhesive remnants from top case.
Page 204
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Microphone Cable 204 2010-06-15 Replacement 1 Remove paper backing from gasket. 2 Use a pencil eraser to seat the microphone gasket in the top case. 3 Make sure the microphone cable is not pinched when installing the LVDS cable guide. 4 To route the microphone cable to the board, refer to Logic board.
Page 205
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Center Bracket 205 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Memory • Camera cable guide • Optical drive • Fan • Keyboard flex bracket • Logic board Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetic Phillips #00 screwdriver Removal 1 Remove 2 screws: • 10-mm (922-8648) at top • 6-mm (922-8644) 2 Remove center bracket. Center Bracket
Page 206
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Kensington Lock 206 2010-06-15 First Steps Remove: • Access door • Battery • Bottom case • Mid wall Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetic Phillips #00 screwdriver Kensington Lock
Page 207
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Kensington Lock 207 2010-06-15 Removal 1 Remove 2 (3 mm) screws (screw part number not offered). 2 Lift out lock. Note that the lock includes the plastic piece and metal shield.
Page 208
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Front Bracket with IR/Sleep Cable 208 2010-06-15 First Steps Remove: • Access door • Battery • Hard drive bracket • Hard drive • Bottom case • Mid wall • Camera cable guide • Optical drive • Hard drive connector cable Tools • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetized Phillips #00 screwdriver • Black stick • Tweezers (optional) Hard Drive Front Bracket with IR/Sleep Cable
Page 209
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Hard Drive Front Bracket with IR/Sleep Cable 209 2010-06-15 Removal 1 Note routing of IR/ sleep light cable. 2 Remove 2 (3.3-mm) 922-8649 screws. 3 Tilt bracket away from top case. 4 Without straining cable, disconnect IR cable connector. 5 Peel up cable from top case. Replacement Note: Peel off adhesive backing from cable, and press cable onto top case. Replacement Caution: The narrow end of the cable can be easily torn if mishandled....
Page 210
MacBook (13-inch, Aluminum, Late 2008) Take Apart — Top Case 210 2010-06-15 First Steps Remove: • Access door • Battery • Hard drive bracket • Hard drive • Bottom case • Memory • Mid wall • Battery cable guide • Camera cable guide • LVDS cable guide • Display assembly • Optical drive • Right speaker/ subwoofer • Fan • Keyboard flex bracket • Logic board • Microphone cable • MagSafe board • Center bracket Tools No tools are required for this procedure. Removal With the first steps completed, the top...