Apple mac pro server mid 2010 User Manual
Here you can view all the pages of manual Apple mac pro server mid 2010 User Manual. The Apple manuals for Personal Computer are available online for free. You can easily download all the documents as PDF.
Page 211
Mac Pro (Mid 2010) Take Apart — Optical Drive Cable Harness 211 2010-12-06 Removal 1 Insert backplane- board connectors on cable harness through opening in media shelf. 2 Remove cable harness from enclosure.
Page 212
Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 212 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • All hard drives and drive carriers • Optical drive carrier and optical drives • PCIe fan • All PCI Express cards • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable • Backplane board Tools • ESD wrist strap • Jeweler’s Phillips screwdriver • Long-handled, magnetized T8 torx screwdriver Bluetooth Antenna Board...
Page 213
Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 213 2010-12-06 Removal 1 Remove antenna board mounting screw. 2 Remove tape holding Bluetooth cable to enclosure. Note: If a metal loop is attached to Bluetooth antenna cable, remove enclosure screw that secures loop. See Reassembly steps 3-6. 3 Gently grasp Bluetooth antenna board and pull it out of its mounting. 4 Remove antenna board and cable from enclosure.
Page 214
Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 214 2010-12-06 Reassembly 1 Insert replacement antenna board at an angle into its mounting. Then straighten out board and insert fully. 2 Replace antenna board mounting screw.
Page 215
Mac Pro (Mid 2010) Take Apart — Bluetooth Antenna Board with Cable 215 2010-12-06 Note: A metal grounding loop is attached to the replacement antenna board cable. Do the following to ground the loop to the enclosure: 3 Using a T8 torx screwdriver, remove the enclosure screw indicated. 4 Place washer (included with replacement antenna board) face up over screw hole. 5 Place grounding loop over washer. 6 Reinstall enclosure screw. 7 Replace tape that secures cable to enclosure. If you...
Page 217
Mac Pro (Mid 2010) Views — Exploded Views 217 2010-12-06 Exploded Views Exploded View 1 Hard Drive Carrier922-8899 Optical Drive Carrier Access Door 922-8902 Hard Drive 1 TB 661-5678 2 TB 661-5679 Optical Drive 661-5681 Optical Drive Cable 922-8891 Rear Processor Cage Fan 922-8886 Processor Cage 922-8893 AirPort Card 661-4907 Bluetooth Card 922-9716 Power Supply 661-5449 PCIe Cards 661-5006 661-5007 661-5121 MacPro Raid Card 661-5012 Enclosure 922-9631 Front Processor Cage Fan922-8885 Speaker 922-8887...
Page 218
Mac Pro (Mid 2010) Views — Exploded Views 218 2010-12-06 Exploded View 2 Processor Heatsink, Single076-1338 Processor Heatsink, Dual, A 076-1367 Processor Heatsink, Dual, B 076-1368 Processor, Dual 2.40 GHz 661-5712 2.66 GHz 661-5713 2.93 GHz 661-5714 Processor Board, Dual 661-5708 Processor, Single 2.80 GHz 661-5709 3.20 GHz 661-5710 3.33 GHz 661-5711 Processor Board, Single 661-5707 Processor Tray Support Plate 076-1344 UDIMM 1 GB, ECC, 1333 MHz 661-5715 2 GB, ECC, 1333 MHz 661-5716 4 GB ECC, 1333 MHz...
Page 219
Mac Pro (Mid 2010) Views — External Views 219 2010-12-06 External Views Front View Optical driveHeadphone jackStat\fs light Po\ber b\ftton FireWire 800 ports\S (2) Second optical driv\Se (optional) USB 2.0 ports (2)
Page 220
Mac Pro (Mid 2010) Views — External Views 220 2010-12-06 Rear View 1 Power socketLocking latch US\f 2.0 \borts (3) FireWire 800 \borts (\S2) Gigabit Ethernet \borts (2) Rear View 2 PCI Express expansion slots Mini DisplayPort \f2\y) Opti\bal digital audio out port Analog audio line-in port Analog audio line-out port Opti\bal digital audio in port DVI display port