Apple mac pro server mid 2010 User Manual
Here you can view all the pages of manual Apple mac pro server mid 2010 User Manual. The Apple manuals for Personal Computer are available online for free. You can easily download all the documents as PDF.
Page 201
Mac Pro (Mid 2010) Take Apart — Front-Panel-Board-to-Backplane-Board Cable 201 2010-12-06 Removal 1 Disconnect cable from front panel board and backplane board. 2 Remove cable from enclosure.
Page 202
Mac Pro (Mid 2010) Take Apart — Backplane Board 202 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • All hard drives and drive carriers • Optical drive carrier and optical drives • PCIe fan • All PCI Express cards • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable Disconnect power supply cable from backplane board. Refer to Power Supply in Take Apart. In addition, disconnect the antenna wires from the following: • AirPort...
Page 203
Mac Pro (Mid 2010) Take Apart — Backplane Board 203 2010-12-06 Removal 1 Disconnect 4 cables. 2 Remove 10 screws. 3 Release AirPort antenna wires from 1 clip on backplane board. 4 Release Bluetooth antenna wire from 2 clips on backplane board.
Page 204
Mac Pro (Mid 2010) Take Apart — Backplane Board 204 2010-12-06 5 Slide board down so that its power connector clears media shelf. 6 Slide board toward front of computer, so that its ports clear openings in back panel. 7 Lift board out of enclosure. Note: If you are replacing backplane board with a new board, transfer back ports EMI shield from original board to replacement board. Also transfer PCI cards and AirPort card (if installed). You do not need to transfer Bluetooth card to new...
Page 205
Mac Pro (Mid 2010) Take Apart — Backplane Board 205 2010-12-06 Note: If you are replacing backplane board with a new board, remove protective film from top of battery. Reassembly Note: Connect optical drive cable A to connector A on backplane board; connect optical drive cable B to connector B on backplane board
Page 206
Mac Pro (Mid 2010) Take Apart — Front Panel Board 206 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • Hard drive and drive carrier in drive bay 1 • Graphics card in slot 1 • PCIe fan • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable Tools • ESD wrist strap • Phillips #2 screwdriver Front Panel Board
Page 207
Mac Pro (Mid 2010) Take Apart — Front Panel Board 207 2010-12-06 Removal 1 Disconnect power button cable from front panel board. 2 Remove 5 screws. 3 Remove board from enclosure.
Page 208
Mac Pro (Mid 2010) Take Apart — Power Button 208 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • Hard drive and drive carrier in drive bay 1 • Graphics card in slot 1 • PCIe fan • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable Tools • ESD wrist strap • Jeweler’s flatblade screwdriver Power Button
Page 209
Mac Pro (Mid 2010) Take Apart — Power Button 209 2010-12-06 Removal 1 Disconnect power button cable from front panel board. 2 Lay computer so that front panel is facing down. 3 Remove black cap. 4 Using jeweler’s flatblade screwdriver, pry up metal C-ring. 5 Remove power button board. 6 Remove metal activation ring. 7 Remove power button.
Page 210
Mac Pro (Mid 2010) Take Apart — Optical Drive Cable Harness 210 2010-12-06 First Steps Open computer, lay it down with access side facing up, and remove: • All hard drives and drive carriers • Optical drive carrier and optical drives • PCIe fan • All PCI Express cards • Processor tray • Processor cage • Front-panel-board-to- backplane-board cable • Backplane board Tools • ESD wrist strap Optical Drive Cable Harness