Apple eMac User Manual
Have a look at the manual Apple eMac User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
68
eMac Take Apart
Memory Procedure 1. Touch a metal surface inside the computer. Then unplug the computer.
Important:
Always do this before you touch any parts, or remove/install any components inside
the computer. To avoid generating static electricity, do not walk around until you have
finished removing or installing the memory and closed the computer.
eMac Take Apart - 69 Memory2. Locate the memory module. 3. Push the ejectors on the memory slot outward and down (#1) so they are in the open position. Remove the memory module (#2). Replacement Note: The memory is designed to fit into the slot only one way. Be sure to align the notches on the module with the small notches inside the slot.
70 eMac Take Apart Battery Battery Tools • No tools are required for this procedure Part Location Note: The battery can be accessed through the user access door on the back of the computer. Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Unplug all cables except the power cord, from the computer. • Remove the user access door.
eMac Take Apart - 71 Battery Procedure 1. Touch a metal surface inside the computer. Then unplug the computer. Important: Always do this before you touch any parts, or remove/install any components inside the computer. To avoid generating static electricity, do not walk around until you have finished removing or installing the battery and closed the computer. 2. WIth a screwdriver or anti-static tool, carefully pry the battery out of the battery holder.
72 eMac Take Apart I/O Panel I/O Panel Tools This procedure requires the following tools: • Phillips #2 screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage. • Remove the digital module assembly.
eMac Take Apart - 73 I/O Panel Procedure 1. Remove the two I/O panel screws. 2. Remove the I/O panel off the logic board.
74 eMac Take Apart Modem Modem Tools This procedure requires the following tools: • Phillips #1 or jeweler’s screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage. • Remove the digital module assembly.
eMac Take Apart - 75 Modem Procedure 1. Remove the two modem screws. 2. Disconnect the RJ-11 cable from the modem. Remove the modem.
76 eMac Take Apart RJ-11 cable RJ-11 cable Tools No tools are required for this procedure Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage.
eMac Take Apart - 77 RJ-11 cable• Remove the digital module assembly. • Remove the I/O panel Procedure 1. Disconnect the RJ-11 cable from the modem. 2. With an anti-static tool, push and then pull the RJ-11 port off the logic board.