Apple eMac User Manual
Have a look at the manual Apple eMac User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
© 2002 Apple Computer, Inc. All rights reserved. Service Source eMac updated 15 January 2004
© 2002 Apple Computer, Inc. All rights reserved. Service Source Take Apart eMac
eMac Take Apart - 1 Tools Tools The following tools are recommended for the take apart procedures. • 2.5 mm hex (for rear housing) • phillips #2 screwdriver • jeweler’s screwdriver set • needlenose pliers • ESD wriststrap and mat • CRT discharge tool Note: Do not use a power driver on the rear housing screws.
2 eMac Take Apart CRT Neck/Display/Analog Assembly Handling Infor- CRT Neck/Display/Analog Assembly Handling Information Handling Important: It is imperative that proper handling and packaging guidelines be followed when working with the display/analog assembly. Do NOT lift, handle, bump, or manipulate the CRT neck/neck board (see red arrows below) on the Display/Analog assembly. Modules damaged by mishandling are NOT covered by Apple Warranty. Apple Authorized Service Providers can be liable for broken CRT necks due to improper handling. Caution : The metal chassis has sharp edges, you may want to wear gloves when handling the assembly. Lift the assembly from the metal chassis; never lift the assembly from the neck. I Packing a Defective Display/Analog Assembly The packing procedure is included with the replacement display/analog assembly. Incorrect packaging can result in damaged eMac displays. Please read and follow the directions enclosed in the shipping box of the new display prior to packaging the defective assembly. AASPs can be liable for broken CRT necks due to improper packing and handling.
eMac Take Apart - 3 User Access Door User Access Door Tools This procedure requires the following tools: • Phillips #2 screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat.
4 eMac Take Apart User Access Door Procedure 1. Remove the screw on the user access door 2. Gently remove the access door.
eMac Take Apart - 5 Feet Feet Tools This procedure requires the following tools: • Phillips #2 screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat.
6 eMac Take Apart Feet Procedure 1. Remove the two screws. Set the plastic feet aside.
eMac Take Apart - 7 Rear Housing Rear Housing Tools • 2.5 mm hex. Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the feet.