Apple eMac User Manual
Here you can view all the pages of manual Apple eMac User Manual. The Apple manuals for Personal Computer are available online for free. You can easily download all the documents as PDF.
Page 71
68
eMac Take Apart
Memory Procedure 1. Touch a metal surface inside the computer. Then unplug the computer.
Important:
Always do this before you touch any parts, or remove/install any components inside
the computer. To avoid generating static electricity, do not walk around until you have
finished removing or installing the memory and closed the computer.
Page 72
eMac Take Apart - 69 Memory2. Locate the memory module. 3. Push the ejectors on the memory slot outward and down (#1) so they are in the open position. Remove the memory module (#2). Replacement Note: The memory is designed to fit into the slot only one way. Be sure to align the notches on the module with the small notches inside the slot.
Page 73
70 eMac Take Apart Battery Battery Tools • No tools are required for this procedure Part Location Note: The battery can be accessed through the user access door on the back of the computer. Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Unplug all cables except the power cord, from the computer. • Remove the user access door.
Page 74
eMac Take Apart - 71 Battery Procedure 1. Touch a metal surface inside the computer. Then unplug the computer. Important: Always do this before you touch any parts, or remove/install any components inside the computer. To avoid generating static electricity, do not walk around until you have finished removing or installing the battery and closed the computer. 2. WIth a screwdriver or anti-static tool, carefully pry the battery out of the battery holder.
Page 75
72 eMac Take Apart I/O Panel I/O Panel Tools This procedure requires the following tools: • Phillips #2 screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage. • Remove the digital module assembly.
Page 76
eMac Take Apart - 73 I/O Panel Procedure 1. Remove the two I/O panel screws. 2. Remove the I/O panel off the logic board.
Page 77
74 eMac Take Apart Modem Modem Tools This procedure requires the following tools: • Phillips #1 or jeweler’s screwdriver Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage. • Remove the digital module assembly.
Page 78
eMac Take Apart - 75 Modem Procedure 1. Remove the two modem screws. 2. Disconnect the RJ-11 cable from the modem. Remove the modem.
Page 79
76 eMac Take Apart RJ-11 cable RJ-11 cable Tools No tools are required for this procedure Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage.
Page 80
eMac Take Apart - 77 RJ-11 cable• Remove the digital module assembly. • Remove the I/O panel Procedure 1. Disconnect the RJ-11 cable from the modem. 2. With an anti-static tool, push and then pull the RJ-11 port off the logic board.