Apple eMac User Manual
Here you can view all the pages of manual Apple eMac User Manual. The Apple manuals for Personal Computer are available online for free. You can easily download all the documents as PDF.
Page 41
38 eMac Take Apart Front Bezel Front Bezel Tools This procedure requires the following tools: • Phillips #2 Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan.
Page 42
eMac Take Apart - 39 Front Bezel• Remove the Faraday cage. • Remove the digital module assembly.
Page 43
40 eMac Take Apart Front Bezel Procedure 1. Remove the eight bezel screws. There are three on each side and two at the top of the bezel. 2. Important: DO NOT remove the two larger screws shown below, or the two screws shown in the next photo. DO NOT remove these larger screws. If they are removed, the CRT will be out of alignment and the entire display/analog assembly will need to be replaced.
Page 44
eMac Take Apart - 41 Front Bezel3. Do Not remove these CRT screws either. 4. Disconnect the microphone cable. 5.Carefully lift the display/analog assembly off the bezel.
Page 45
42 eMac Take Apart Antenna Board Antenna Board Tools This procedure requires the following tools: • Phillips #2 screwdriver • Needlenose pliers Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage.
Page 46
eMac Take Apart - 43 Antenna Board• Remove the front bezel. • Remove the digital module assembly. Procedure 1. Remove one screw and pinch the standoff with a needlenose pliers to release the antenna board from the divider panel.
Page 47
44 eMac Take Apart Antenna Board 2. Carefully position the computer on it’s base. Facing the CRT, locate the metal antenna bracket at the top of the CRT. Remove the screw attached to the bracket. 3. Carefully pry the antenna cable from the two clips on the side of the CRT.
Page 48
eMac Take Apart - 45 Microphone Microphone Tools This procedure requires the following tools: • Phillips #2 Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan.
Page 49
46 eMac Take Apart Microphone • Remove the Faraday cage. • Remove the digital module assembly. • Remove the front bezel. Procedure 1. Remove the microphone cable from the bezel. Replacement Note: When replacing the microphone into the bezel, the metal faces down, the dimple faces up.
Page 50
eMac Take Apart - 47 Down Converter Down Converter Tools This procedure requires the following tools: • Phillips #2 Part Location Preliminary Steps Before you begin, do the following: • Place the computer face down on an ESD mat. • Remove the user access door. • Remove the feet. • Remove the rear housing. • Discharge the CRT. • Remove the fan. • Remove the Faraday cage.