Anetsberger Brothers I12 Cooking Computer Service Manual

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 21 of 28  L22-353 Rev 1 
5  Factory Menu Level 4 (for the Technician) 
With no cook timers running, displays will show one of the following displays:  ; 
, or  .Press the   program key.  Left display will show 
[PROGRAM].  Right display will be blank. 
Enter password number   using the product keys as a numeric keypad for entry. 
Display will show  .  The key indicators will illuminate to prompt operator to select a key.  
This section details...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 22 of 28 
5.6 Diagnostic Menu Entry 
This menu is identical to Diagnostic Menu section 4.5 except 
 is displayed instead of [SERVICE].   
 
  
5.7 Ready Level 
 This menu is identical to Ready Level Menu section 4.6 except 
 is displayed instead of [SERVICE].    
 
 
 
5.8 Operating Temperature Range 
This menu is identical to Operating Temperature range Menu section 4.7 
except   is displayed instead of [SERVICE].    
 
 
 
5.9  High...

ANETS I12 Cooking Computer Service 
ANETS P/N 60149509 
 
  Page 23 of 28  L22-353 Rev 1 
5.12 More Factory Menu Entry 
With display showing   press product key 12. 
Display shows  . 
  
5.12.1  Control ID Display 
From the   display, press the 11 key. 
Display will show [CONTROL ] [60149509], the ANETS part number. 
 
 Press the [0] key again. 
 
Display will show [S/W           ] [0149501x], this is ANETS’s software number 
and current revision letter.   
 
 Press the [0] key again. 
 
Display will...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 24 of 28 
6 Other Displays: 
 
Open probe detection is standard on all ANETS 
controls.  If probe is detected open, normal 
heating and cooking activities are suspended. 
 
This display warns operators that the vat 
temperature has exceeded set temperature by 
+40°F (+22°C), or an absolute maximum of 
410°F (210°C). The alarm will also sound.  This 
display does not show the status of the 
mechanical high limit switch.  
 
This message...

ANETS I12 Cooking Computer Service 
ANETS P/N 60149509 
 
  25 of 28  L22-353 Rev 1 
 
7 Mechanical Dimensions: 
 
 
 
   

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 26 of 28 
8  Electrical Connections at LEFT and RIGHT connectors: 
      
As viewed from the rear of the control. 
 
J1(Left) Inputs Type Nominal Notes:
1ACH PWR 24VAC
24VAC +20% -15% 50/60Hz.
2ACN PWR 24VACN
24VAC Return.
3 PROBE+
4 PROBE-
5 DVI IN 24VAC Drain Valve Interlock
6 HFB IN 24VAC Heat Feed Back
7 24VDC COM IN 24VDC DC Returm
8 HD OUT 24VDC Heat Demand
9 SO/xFER OUT 24VDC Side ON or XFER
10 RBL OUT 24VDC Right Basket Lift
11...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 27 of 28   L22-353 Rev 1 
9  Probe Resistance Chart: 
 
Notes: Resistance, of either probe lead, to the frame of the appliance should read as “open’ on the 
meter.  Typically this is 1Meg ohms or more. 
°C = 5/9 (°F-32) 
°F = (9/5 * °C) +32 
 
  
Probe 
Temp 
(°F)Probe 
Temp 
(°C)Resistance 
(Ohms)Probe 
Temp 
(°F)Probe 
Temp 
(°C)Resistance 
(Ohms)Probe 
Temp 
(°F)Probe 
Temp 
(°C)Resistance 
(Ohms)
10 -12.2 562734 175 79.4 11719 340 171.1 1058.23...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
Page 28 of 28    L22-278  Rev 1   4/19/2012 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
In the event of problems with or questions 
about your order, please contact the ANETS 
factory at  
(603) 225-6684 World Wide 
www.anets.com In the event of problems with or questions 
about your equipment, please contact the 
ANETS Authorized Service and Parts 
representative (ASAP) covering your area, 
or contact ANETS at the numbers
 listed to 
the left. 
MAILING ADDRESS –...