Anetsberger Brothers I12 Cooking Computer Service Manual

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 11 of 28  L22-353 Rev 1 
 
3.3  Beeper Volume and Tone: 
Volume and Tone of the beeper alarm may be changed in this section.  Volume ranges are 1,2 and 
3, where 3 is the loudest setting.  This model also has a selection for tone. 
With display showing  , press the product key [0]. 
 
 Display will show  .  Press product key 3, display  
shows [VOLUME n] [BEEPER].   
 
 Use the product key [0] to scroll through choices (n= 1,2,3, or T).  Beeper...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 12 of 28 
6
7
3.6  Recovery Test Value: 
This controller maintains a record of heat up times for the appliance.  A poorly running appliance 
will have increased recovery times stored in this display.  There is no selection done here, just the 
display of recovery time values. 
With display showing  , press the product key [0]. 
 
 Display will show  . 
 
 Press product key 6, display will show [RECOVERY] [TEST]. 
 
 Press the product...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 13 of 28  L22-353 Rev 1 
4  To Enter Programming Level 3 (for the Technician) 
With no cook timers running, displays will show one of the following displays: 
; , 
or .  
 Press the   key.  The left display will show  .  The right 
display will be blank.   
 
 Enter password
                                        using the product keys as a numeric 
keypad for entry.  
   
 Display will show                              .  Product key indicators...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 14 of 28 
4.3  Minnimum ON and OFF Cycle Time 
With display showing   press product key 3.   
 
 Display shows [MIN ON:nn] [MIN ON], where “nn” is the value, in seconds, of time 
for minimum heat pulse period.  
 
 To change this value, use the product keys for numeric entry of a new value, then 
press the   key to save. 
 Display shows [MIN OFF:nn] [MIN OFF], where “nn” is the value, in seconds, of 
time for minimum heat off period....

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 15 of 28  L22-353 Rev 1 
5
4.5 Diagnostic Menu Entry 
The diagnostic menu is used to determine the functionality of controller outputs and inputs.  By 
exercising each output and examining inputs, a determination can be made if an appliance problem 
is controller related.  In the diagnostic menu, product keys are assigned specific inputs or outputs. 
All outputs in the ON state should produce 22VDC at the appropriate pins on the controller...

ANETS I12 Cooking Computer Service 
ANETS P/N 60149509 
 
  Page 16 of 28  L22-353 Rev 1 
8
4.6 Ready Level 
With display showing   press product key 6. Display shows [READY nn],  
where “nn” is the value, in degrees, below set temperature that the   message is 
displayed. To change this value, use the product keys for numeric entry of a new value.   
 Press the   key. Display now shows  . 
 
4.7  Temperature Operating Range 
Forces the control to display the range of temperatures that may be set by...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 17 of 28  L22-353 Rev 1 
4.8.2 Cook Now(Single Only) 
Should operators be forced to acknowledge a Cook Done Alarm before starting another 
cook?  This setting forces that requirement.  Factory default value is OFF. 
 With display showing  , press product key 2.   
 Display will show [NOW xxx] [COOK NOW], where “xxx” is ON or OFF.   
 Use product key [0] change value.  Press the   to save choice.   
 Display returns to  . 
 
Note: With OFF value...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 18 of 28 
4.8.5 Hold Alarm Duration 
With the display showing  , press product key 5.   
Display will show [HD-DUR:nn] [DURATION], where “nn” is the time in seconds the hold 
alarm will sound. Use product keys for numeric entry of desired value, then press the   
to save choice. Display returns to  . 
 
4.8.6 Cancel Duration 
With the display showing  , press product key 6.   
Display will show [CANCEL:nn] [DELAY] , where “nn” is the...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 19 of 28  L22-353 Rev 1 
4.8.9  Standing Pilot Toggle 
For some applications, it is desirable to maintain the gas pilot flame when the appliance is 
OFF.  Heat from the pilot keeps solid shortening in the liquid state for quicker warm-ups in the 
morning. Default setting for standing pilot is off. 
 
Note: Heat Demand Profile (section 4.8.3) must be set to Generic 1, or T-stat.  
Standing Pilot toggle has no effect in with any other setting. 
 
With...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 20 of 28 
 
 
4.9  Number of Basket Lifts 
With the display showing  ; press key 9. 
 Display will show  ; where the number is the current setting for basket lift outputs.  
Use product key [0] to scroll through the choices: 
 
0 = no basket lift outputs 
1 = one basket lift output for all keys. 
2 = two outputs – keys 1-6 on left side, 7-12 on the right. 
3 = Four outputs: keys 1-3 and keys 4-6 on left side.  Keys 7-9 and keys 
10-12...