Anetsberger Brothers I12 Cooking Computer Service Manual

  
L22-353 Rev 1 (4/19) 
English 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This control was developed specifically for ANETS fryer products.  It utilizes the latest in 
microprocessor technology and is completely solid state.  This control offers the latest cooking 
technology, including temperature and time compensation that requires no user adjustments for 
consistently cooked product.  Other features include, drain valve interlock, faulty probe detection, 
selectable melt cycles,...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1                                          Page 2 of 28 
Table of Contents: 
1 Key Locations and Functions: .......................................................................................................... 4 
1.1 To turn the appliance ON:  _______________________________________________________ 4 
1.2 To turn the appliance OFF: _______________________________________________________ 4 
1.3 To start a cook:...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 3 of 28  L22-353 Rev 1 
4.8.4 Shake Alarm Duration .................................................................................................................................................. 17 4.8.5 Hold Alarm Duration ..................................................................................................................................................... 18 4.8.6 Cancel Duration...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 4 of 28 
4
1 Key Locations and Functions: 
 
1.1  To turn the appliance ON: 
If power is applied to the appliance, the displays will show  .  Press the  key.  
Displays will show one of the following:  
;  , or  .  Some messages may show in both left 
and right displays.  Wait for the appliance to heat up to the [READY] condition before cooking. 
 
1.2  To turn the appliance OFF: 
Press the   key. Display will momentarily show the...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1                                          Page 5 of 28 
1.4  To cancel a cook: 
Press and hold the product key to cancel a running cook.  If no other cooks are 
pending, controller displays will return to  . 
  
1.5  To check Actual and Set temperatures: 
To view the actual vat temperature, press the   key.  The display will show   
or  , where “F’ is Fahrenheit, and “C” is Celsius.  After a few moments, the display  
will return to  ;  , or...

ANETS I12 Cooking Computer Service 
ANETS P/N 60149509 
 
  Page 6 of 28  L22-353 Rev 1 
12 2
00 1
1.7  To perform a Boil Out operation: 
Normal maintenance of a fryer requires regular tank cleaning.  This process involves draining the 
vat of oil and filling with water.  Cleaning solution is added, and the control is set to boil by one of 
the following methods: 
 
1.7.1  Automatic Boil Entry (Water Detection): 
Fill the appliance with water and turn the appliance on.  Heat will be applied to the vat...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 7 of 28  L22-353 Rev 1 
2  To Enter Programming Level 1 (for the Store Manager): 
Note: The factory default setting for this control does not require a  password to be entered.  
However, the operator password requirement and value may be changed in section 3.2.  
Entry of a password when NOT required will not interfere with the programming process. 
With no cook timers running, displays will show one of the following displays:  ; 
, or  .  Press the...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 8 of 28 
2.2  To Change a Product Key–Cook, Shake, Hold, and Hold Pre-Alarm Times: 
For each product key, Cook, Shake, Hold, and Hold Pre-alarm times are set in this section.   
With display showing  , continue with the following section for each product key to 
change. 
 
2.2.1 Cook Time 
Cook Time may be set for each product key.  To deactivate any product key enter a zero value 
for cook time.   
 Press the   key.   
 Display will...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
  Page 9 of 28  L22-353 Rev 1 
 
2.2.4 Hold Pre-Alarm 
Hold Pre-Alarm is a timer setting that is used to warn operators that the Hold Time is about to 
expire.  To use Hold Pre-Alarm, the time value must be a non-zero value, and, must be set to a 
value less than Hold Time.  Default value is zero, meaning the Hold Pre-Alarm is inactive. 
 
 Display shows [nPA mm:ss] [TIME] where “n” is the key number, PA means Pre-Alarm, and 
“mm:ss” is minutes and...

ANETS I12 Cooking Computer 
ANETS P/N 60149509 
L22-353 Rev 1  Page 10 of 28 
1
2
0
3  To Change Options Level 2 ( for the Store Manager): 
The display must show   from section 2 to change these options. When the  
product key [10/0] is pressed, the display will show  .  Indicator 
lights above product keys will illuminate to represent options that may be changed.  Each option 
listed below uses the product key [0] to toggle or scroll through available choices in the display.  
When the correct value is...