Home > Anetsberger Brothers > Other > Anetsberger Brothers GPC14 14 Pasta Pro pasta cooker USER MANUAL

Anetsberger Brothers GPC14 14 Pasta Pro pasta cooker USER MANUAL

Add to Favourites
    Download as PDF

    View the Anetsberger Brothers GPC14 14 Pasta Pro pasta cooker USER MANUAL for free. All the Anetsberger Brothers manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 GPC-14/18/20 PASTA COOKER GPC PASTA PRO INSTALLATION & USER OPERATION MANUAL GPC-18 shown with optional rinse station. KEEP THIS MANUAL IN A CONVENIENT LOCATION FOR FUTURE REFERENCE. Anets, Inc PO Box 501, Concord, NH 03302-0501 Tel: 603-225-6684 Fax: 603-225-5231 L20-345 Rev 3 NOTICE! After installation of your equipment, immediately contact your local gas supplier to obtain information as to what action to take in...
    Page 2 GPC-14/18/20 PASTA COOKER SHIPPING CONTAINER INSPECTION 1. Carefully examine the shipping container for external damage. If damage is noted, notify the delivery carrier immediately. Save all packaging materials for claim examination. 2. If no external damage is noted, remove the unit from the shipping container and carefully examine it for damage. If damage is noted, place the unit in a safe location so that it can be inspected. SPECIFICATIONS * Measured at pressure tap on burner...
    Page 3 GPC-14/18/20 PASTA COOKER INSTALLATION INSTRUCTIONS 1. The installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code ANSI Z223.1 latest edition, CAN/CGA -B149.1 & B149.2, Natural Gas Installation Code as applicable including: a. The appliance and its individual shut off valve must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of ½ psig (3.45 kPa). b. The appliance...
    Page 4 GPC-14/18/20 PASTA COOKER OPERATING INSTRUCTIONS LIGHTING PROCEDURE 1. Fill the tank with water to the appropriate level as indicated by the water level marks on the rear of the tank. 2. Turn the gas safety valve knob to the “Pilot” position. 3. Push and hold the knob down & ignite the pilot. 4. Continue to hold the knob for 30 seconds or until the pilot flame does not drop out. 5. Turn the gas safety valve to the “ON” position. 6. Set the thermostat to the desired temperature. 7. If the...
    Start reading Anetsberger Brothers GPC14 14 Pasta Pro pasta cooker USER MANUAL

    Related Manuals for Anetsberger Brothers GPC14 14 Pasta Pro pasta cooker USER MANUAL

    All Anetsberger Brothers manuals