Amanda Work Place Instructions Manual

Appendix C: Configuration Reference 183
smdi_delayThe time that Amanda waits after the phone rings and is answered, before looking at the 
integration information (if any). 
Use a number of tenths of seconds or 0. The default is 0. The range is 0-255. This option 
does not apply to inband integration.
When non-zero, Amanda waits the specified time. This allows more than one string to 
be sent to a given port per telephone call. The number should allow enough time for all 
the strings to arrive, forcing...

184 Installing [email protected]
smdi_termUsed only when smdi_type is generic. The terminating characters (if any) which define the end 
of a generic SMDI packet. You can include the following escape sequences (similar to those 
used in strings within tokens)
Sequence Meaning

 newline (carriage return followed by a linefeed)

 carriage return
\j linefeed
\a attention
\d end of transmission
\\ backslash
	 tab
\digitsThe digits must represent the octal number for any character in the range 0 to 377 (That...

Appendix C: Configuration Reference 185
did_modeIndicates whether Amanda is using DID. 
True or False. The default is False.
When True, Amanda expects a DID interface (such as EXACOM) that processes a hook-
flash as battery reversal.
When False, Amanda does not expect a DID interface.
The default appears in install.cfg as:
set did_mode false
n_aniThe number of Automatic Number Identification (ANI) digits to be read by Amanda be-
tween the first and second wink in a 2-wink T1 environment. 
The default is...

186 Installing [email protected] 

- token 98
Symbols
#
 166
end of DTMF entry 173
## 166
%A token 102
%B token 102
%C token 102
%D token 102
%E token 102, 145
%F token 103
%G token 103
%H token 103
%I token 104
%M() token 111
%N token 112
%P token 113
%R token 118
%T token 120
%U token 120, 145
%V token 120, 145
%W token 121
%X token 121
%Y token 122
%Z token 122
+() token 101
, token 98
() token 102
?() token 98
@ token 98
[() token 99
\
backslash keystroke
 99
\A
Ctrl+G keystroke
 99
\B
Ctrl+B keystroke
 99
\N
Ctrl+J keystroke...

188 Installing [email protected]
beeps
connection
 157
for recording 155
recording 170
begin_rec_prompt 155
Bellcore Standard 61, 184
blind transfers 145
boards
voice
 101, 102
box_grt 50, 180
box_idx 50, 180
box_outdial 179
box_snd 49, 51, 180
bps 181
bps rates
modem
 146
Brooktrout
voice board
 175
Busy 21
busy
active hold
 154
character code 33
dial code 13
dl_bsyret 13
no holding 156
Rhetorex notification option 
156
time between transfer attempts 
173
treated as Ring No Answer 156
Busy chain 145...

Index 189
defaults_box 50, 157
defining
dial codes
 11
tone patterns 17
Definity-G3 184
serial integration 67
delay
after DTMF entry
 173
before integration 183
between disk space checks 172
between DTMF tones 160
between menu repetitions 173
between messages when deliv-
ering list
 163
between on-hook and off-hook 
events
 173
between SMDI packet and call 
183
end of recording detected 174
hold between transfer attempts 
173
screen saver starts 172
waiting for peripheral 174
deleting
messages
 108, 169...

190 Installing [email protected]
earth recall 170
employee directories
mailboxes
 50
per port 49
employee directory 180
end user
support
 4
end_rec_menu 161
ending
DTMF entry
 173
recording 174
English 169
Ericsson MD-110
serial integration
 69
STX character 99
EXACOM 185
exit_digit 161
exit_to_0 161
Extension fields
contents
 102
normal processing 77, 98
programming more than one 
78
extensions
busy
 155
F
F token
 103
failure
token execution
 78
fax machines
detecting automatically
 57
fax modems...

Index 191
immediate record
character code
 33
in band integration patterns
adding
 31
inband integration
trace files
 25
waiting periods 173
inband integration patterns
defining
 25
testing 27
trace files 28
incoming
faxes
 179
incoming calls
configuring
 45
information system 3
initialization
dl_init
 14
installation
support
 4
installation checklist 5
installing
RDSP/x32 voice boards
 151
integration 61
Bellcore Standard 61
Definity-G3 67
DTMF digits 184
Ericsson MD-110 69
generic 71
greetings 162
MF...

192 Installing [email protected]
minimum for guest 162
operators 50
PCPM 50
playing messages 115
previous mailbox token 113
security codes 107
sending messages to 166
setting security codes 109
settings for token programming 
78
templates 50
total messages 111, 115
manual
purpose
 3
Max Times
notification
 146
max_dl_inits 164
max_local_extension 178
max_ports 164
max_prompt 164
maximum
characters in SMDI packet
 183
maximum time
Name and Extension recording
 
166
recording a list comment 156
maximums...