Amanda Work Group Manual

Appendix F: Installing Amanda 261
4. Use the default destination folder (C:\Rht) then click Next>.
The Setup Type dialog box appears.
5. Select RealCT Runtime Files Only from the list box then click Next>. 

262 Installing [email protected]/Windows
The Select Program Folder dialog box appears.
6. Use Brooktrout, the default setting for the program folder, and click Next>.
The Start Copying Files dialog box appears.
7. Click Next>.
After the files are copied to your computer, the Question dialog box asks you to con-
figure the drivers.
8. Click Yes to start the Brooktrout Configuration Wizard.
N
OTE:You can also start the configuration wizard from the Start menu. 

Appendix F: Installing Amanda 263
The Brooktrout CTP Configuration Wizard - Version 2.32 dialog box appears.
9. Click Next>.
The Brooktrout CTP Configuration Wizard - Board Information dialog box appears.
This dialog box is initially empty. The first sample shows a two-board six-port system 
using a 432 voice board and a 232. 
10. To add a new board, click Add. 

264 Installing [email protected]/Windows
The Add a Board dialog box appears.
11. From the Board Type group box, select a voice board type.
12. From the Address drop-down list box, select the Address 300 for the first board, 301 
for a second board, and so on.
13. From the Model drop-down list box, select the number for the board.
N
OTE:Clicking Show Jump shows you how to jumper the selected board 
for the selected address.
14. Click OK. 

Appendix F: Installing Amanda 265
The Brooktrout CTP Configuration Wizard - Board Information dialog box reappears.
15. Repeat steps 11 to 15 to add another board.
Follow the directions on the dialog box to edit or remove inaccurate board informa-
tion.
The next three figures show a combination of Brooktrout boards:
the RNTI-ATSI and the RDSP 12000. 

266 Installing [email protected]/Windows 

Appendix F: Installing Amanda 267 

268 Installing [email protected]/Windows
The Brooktrout CTP Configuration Wizard - Interrupt Request (IRQ) dialog box 
appears.
16. Allow the wizard to select an available IRQ for you then click Next>.
The Amanda Company uses IRQ5 for our turnkey systems.
The Brooktrout CTP Configuration Wizard - Shared Memory Address dialog box 
appears.
17. Allow the wizard to select a shared memory address for your voice boards then click 
Next>. 

Appendix F: Installing Amanda 269
The Brooktrout CTP Configuration Wizard - Advanced Options dialog box appears.
18. Click Advanced Options....
The Advanced Options dialog box appears.
19. In the ISA-Bus Addressing Mode group box, select the 8-Bit option button.
20. Click Browse....
The Open dialog box appears.
21. Select C:\RHT\ACCUCALL\DEFAULT99.TON. (You may not be able to see the 
.TON.)
22. Click OK twice. 

270 Installing [email protected]/Windows
The Brooktrout CTP Configuration Wizard - Advanced Options dialog box reappears.
23. Click Next>.
The Brooktrout CTP Configuration Wizard - Save Driver Settings dialog box appears.
24. Select Yes then click Next>.
The Brooktrout CTP Configuration Wizard dialog box appears.
25. Click Finish or click AccuCall Wizard to create a PCPM table.
For more information about AccuCall Wizard, see “Using AccuCall Wizard” in the 
Installing [email protected]/Windows guide.
26....