Alpha Tool.Com.HK Limited Grinder ECG125 User Manual
Here you can view all the pages of manual Alpha Tool.Com.HK Limited Grinder ECG125 User Manual. The Alpha Tool.Com.HK Limited manuals for Grinder are available online for free. You can easily download all the documents as PDF.
Page 1
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114
www.alpha-tools.com
Part No: ECG-125
ECG-225
Alpha® Ecogrinder
Instruction Manual
MANUAL
VERSION 5
Page 2
![Page 2
2
TABLE OF CONTENTS
Ecogrinder Overview ........................................................................\
........................4
Accessories ........................................................................\
......................................5
Introduction ........................................................................\
.......................................6
About The Symbols........................................................................\
.....................6...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-1.png "Page 2
2
TABLE OF CONTENTS
Ecogrinder Overview ........................................................................\
........................4
Accessories ........................................................................\
......................................5
Introduction ........................................................................\
.......................................6
About The Symbols........................................................................\
.....................6...")
2 TABLE OF CONTENTS Ecogrinder Overview ........................................................................\ ........................4 Accessories ........................................................................\ ......................................5 Introduction ........................................................................\ .......................................6 About The Symbols........................................................................\ .....................6...
Page 3
![Page 3
3
Replacing And Checking The Carbon Brushes ...................................................20
Grinding Wheel Inspection, Removal, and Installation .......................................24
Inspecting The Grinding Wheel .......................................................................24
Checking The Grinding Wheel For Replacement ...........................................25
Removing The Grinding Wheel ........................................................................\
26
Replacing...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-2.png "Page 3
3
Replacing And Checking The Carbon Brushes ...................................................20
Grinding Wheel Inspection, Removal, and Installation .......................................24
Inspecting The Grinding Wheel .......................................................................24
Checking The Grinding Wheel For Replacement ...........................................25
Removing The Grinding Wheel ........................................................................\
26
Replacing...")
3 Replacing And Checking The Carbon Brushes ...................................................20 Grinding Wheel Inspection, Removal, and Installation .......................................24 Inspecting The Grinding Wheel .......................................................................24 Checking The Grinding Wheel For Replacement ...........................................25 Removing The Grinding Wheel ........................................................................\ 26 Replacing...
Page 4
![Page 4
4
ECOGRINDER OVERVIEW
SPECIFICATIONS
Power Supply .............................................................Single-Phase AC, 50/60 Hz
Rating ................................................................................................110/220 Volts
Amperage .................................................................................................10.25/5.1
Power .....................................................................................................\
......1050W
No-load Speed...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-3.png "Page 4
4
ECOGRINDER OVERVIEW
SPECIFICATIONS
Power Supply .............................................................Single-Phase AC, 50/60 Hz
Rating ................................................................................................110/220 Volts
Amperage .................................................................................................10.25/5.1
Power .....................................................................................................\
......1050W
No-load Speed...")
4 ECOGRINDER OVERVIEW SPECIFICATIONS Power Supply .............................................................Single-Phase AC, 50/60 Hz Rating ................................................................................................110/220 Volts Amperage .................................................................................................10.25/5.1 Power .....................................................................................................\ ......1050W No-load Speed...
Page 5
5 ACCESSORIES COMPONENTS: 1. Dust Bag (Part No. 133544) 2. Dust Hose (Part No. 133533) 3. Dust Gate with Anti-Back-Flow Flap (Part Nos. 133530 & 133531) 4. Spring Loaded Flange Assembly (Part Nos. 801375, 801376, 801377, 801378 & 801379) 5. Carbon Brush Set (Part No. 801594) 6. Pin Spanner Wrench 34 mm (Part No. 130434) 7. Top Handle w/Screw & Lock Washers (Part No. 801354) 8. 5” Grinding Wheel w/26mm Arbor (Part No. DSQ0500) 9. Fan Belt Set (Part No. 133508) 10. Manual Height Adjustment Flange...
Page 6
![Page 6
6
INTRODUCTION
Thank you for purchasing the Alpha® Ecogrinder. Please read this instruction manual
thoroughly to ensure safety and correct use of this tool. Keep this man\
ual in a place where
operators can access it easily whenever necessary.
ABOUT THE SYMBOLS
According to the hazard level, all safety notes in this manual are classified into “DANGER”,
“WARNING”, and “CAUTION”.
DANGER! Death or serious personal injury is imminent when handling this
grinder incorrectly.
WARNING!...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-5.png "Page 6
6
INTRODUCTION
Thank you for purchasing the Alpha® Ecogrinder. Please read this instruction manual
thoroughly to ensure safety and correct use of this tool. Keep this man\
ual in a place where
operators can access it easily whenever necessary.
ABOUT THE SYMBOLS
According to the hazard level, all safety notes in this manual are classified into “DANGER”,
“WARNING”, and “CAUTION”.
DANGER! Death or serious personal injury is imminent when handling this
grinder incorrectly.
WARNING!...")
6
INTRODUCTION
Thank you for purchasing the Alpha® Ecogrinder. Please read this instruction manual
thoroughly to ensure safety and correct use of this tool. Keep this man\
ual in a place where
operators can access it easily whenever necessary.
ABOUT THE SYMBOLS
According to the hazard level, all safety notes in this manual are classified into “DANGER”,
“WARNING”, and “CAUTION”.
DANGER! Death or serious personal injury is imminent when handling this
grinder incorrectly.
WARNING!...
Page 7
![Page 7
7
CAUTION!
The following are important notes for products, operation, and maintenan\
ce applicable to
this polisher.
GENERAL SAFETY RULES
WORK AREA
• Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
• Do not operate power tools in explosive atmospheres, such as in the pres\
ence
of flammable liquids, gases, or dust. Power tools may create sparks which may
ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-6.png "Page 7
7
CAUTION!
The following are important notes for products, operation, and maintenan\
ce applicable to
this polisher.
GENERAL SAFETY RULES
WORK AREA
• Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
• Do not operate power tools in explosive atmospheres, such as in the pres\
ence
of flammable liquids, gases, or dust. Power tools may create sparks which may
ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a...")
7 CAUTION! The following are important notes for products, operation, and maintenan\ ce applicable to this polisher. GENERAL SAFETY RULES WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the pres\ ence of flammable liquids, gases, or dust. Power tools may create sparks which may ignite the dust or fumes. • Keep bystanders, children, and visitors away while operating a...
Page 8
![Page 8
8
• Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with
your finger on the switch or plugging in tools that have the switch on, invites accidents.
• Remove adjusting keys or wrenches before turning the tool on. A wrench or a
key that is left attached to a rotating part of the tool may result in p\
ersonal injury.
• Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-7.png "Page 8
8
• Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with
your finger on the switch or plugging in tools that have the switch on, invites accidents.
• Remove adjusting keys or wrenches before turning the tool on. A wrench or a
key that is left attached to a rotating part of the tool may result in p\
ersonal injury.
• Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in...")
8 • Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on, invites accidents. • Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in p\ ersonal injury. • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in...
Page 9
![Page 9
9
SERVICE
• Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Follow ins\
tructions in
the Maintenance section of this manual. Use of unauthorized part or failure to follow
Maintenance Instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
• Accessories must be rated for at least the speed...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-8.png "Page 9
9
SERVICE
• Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Follow ins\
tructions in
the Maintenance section of this manual. Use of unauthorized part or failure to follow
Maintenance Instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
• Accessories must be rated for at least the speed...")
9 SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. • When servicing a tool, use only identical replacement parts. Follow ins\ tructions in the Maintenance section of this manual. Use of unauthorized part or failure to follow Maintenance Instructions may create a risk of electric shock or injury. SPECIFIC SAFETY RULES • Accessories must be rated for at least the speed...
Page 10
![Page 10
10
• Drugs, alcohol, medication, Do not operate tool while under the influence of
drugs, alcohol, or any medication. Follow this rule will reduce the ris\
k of electric
shock, fire, or serious personal injury.
• Keep hands away from polishing area. Follow this rule will reduce the r\
isk of cuts,
scrapes, or serious personal injury.
• Save these instruction. Refer to them frequently and use them to instruct others who
may use this tool. If you loan someone this tool, loan them these...](http://img.usermanuals.tech/thumb/326/5192/w300_grinder-ecg125-user-manual-1478735221_d-9.png "Page 10
10
• Drugs, alcohol, medication, Do not operate tool while under the influence of
drugs, alcohol, or any medication. Follow this rule will reduce the ris\
k of electric
shock, fire, or serious personal injury.
• Keep hands away from polishing area. Follow this rule will reduce the r\
isk of cuts,
scrapes, or serious personal injury.
• Save these instruction. Refer to them frequently and use them to instruct others who
may use this tool. If you loan someone this tool, loan them these...")
10 • Drugs, alcohol, medication, Do not operate tool while under the influence of drugs, alcohol, or any medication. Follow this rule will reduce the ris\ k of electric shock, fire, or serious personal injury. • Keep hands away from polishing area. Follow this rule will reduce the r\ isk of cuts, scrapes, or serious personal injury. • Save these instruction. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these...