Aleratec DVD CD RoboRacer SA Stand Alone 100 Disc Capacity Duplicator User Guide

www.aleratec.com45
Using the DVD/CD Duplicator
12.08	Compare	Firmware
This function compares the current version firmware with the latest version 
when the firmware disc is placed into the DVD/CD-ROM.
Place the disc that contains the latest firmware data into the DVD/CD-
1. 
ROM.
12.09	Hardware	Diagnostic
This function will detect the devices connected to the duplicator’s controller 
and display information on the hardware.  Move to Hardware Diagnostic with the arrow keys and press the 
1.  ENT 
button...

www.aleratec.com
46
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued 
12.10	Load	Default
This function resets the Duplicator’s settings back to their factory default 
values.
By pressing the 
1.  ENT button, the duplicator will be reset to it’s factory 
default settings.
12.11	CD+G	(Not	supported)
12.12	ISRC	&	MCN
ISRC & MCN mean the information of international standard recording code\
 
such as writer, country, year of publication, etc., can be written into each 
track. Default setting...

www.aleratec.com47
Using the DVD/CD Duplicator
12.13	CD-TEXT	(Not	supported)	
12.14	USB	Option
This function  lets you connect the Duplicator to a computer. Be sure that 
your computer supports USB 2.0.
Note: When the USB option is  OFF, “14. USB Mode” will be hidden; that 
is, it won’t appear in the first layer of the function menu. Only “\
12. Adv 
Setup” will appear. When the USB option is ON, the original “12. Adv 
Setup” will change to “12.14 Adv Setup”.
There are two ways to enter USB Mode:  Auto...

www.aleratec.com
48
Using the DVD/CD Duplicator
Main Menu
Advanced Setup
12.14	USB	Option		- continued 
Manual:
2.   Press the DOWN Arrow to see the following display. Here 
you can switch back to standalone mode (copy mode).
Press 
3.  ENT and the display will change to the following display. Press 
the DOWN Arrow to switch to YES. Press ENT and the Duplicator 
will switch back to the standalone duplicator mode (copy mode).
To go back to USB Mode, go to menu item “12.14 USB Mode” and 
4. 
press ENT....

www.aleratec.com49
Using the DVD/CD Duplicator
12.15	USB	Auto-Link	Option
Press 
1.  ENT and use the  UP and DOWN arrows to toggle between  ON 
and OFF . With USB Auto-Link ON, the controller will enter “USB L. 
H Mode” simply by connecting the USB cable to the USB port of the 
Duplicator and the USB port of your computer. 
When you are finished with USB Mode, simply disconnect the USB 
2. 
cable from the computer, and the Duplicator will switch to Stand Alone.
12.16	Use	Big	Block Press 
1.  ENT and use...

www.aleratec.com
50
Using the DVD/CD Duplicator
Using the Duplicator as a DVD/CD-Recorder
The 1:2 DVD/CD Copy Cruiser Pro HLX Win/Mac can be used as a DVD/
VD-Recorder. Installation consists of connecting the Duplicator to your 
computer, and installing the software on your computer.
Connect the Duplicator to your computer.
1. 
Connect the USB 2.0 Data Cable to the Duplicator.
 
▪
Align and gently attach the USB 2.0 Data Cable.
Power Connector
USB 2.0 Connector 

www.aleratec.com51
Using the DVD/CD Duplicator
Connect the USB 2.0 Data Cable to the Duplicator.
 
▪
Align and gently insert the USB 2.0 Data Cable into an available 
USB 2.0 port on your computer, making sure you do not bend the 
connector.
For P/N 260147 and 260148 and systems running Windows 98SE 
 
▪
only: Install the USB 2.0 Drivers.
If you are running Windows 98SE: After your computer starts up, 
insert the USB 2.0 Driver Software in your computer’s DVD/CD-
ROM drive, and run the driver install...

www.aleratec.com
52
Specifications
Loading Mechanisms Tray
• 
Supported Media Types DVD-R/RW
• 
DVD+R/RW
• 
CD-R
• 
CD-RW
• 
120mm, mini CD (8cm/3”)
• 
Business Card CD
• 
Supported Formats Most Industry Standard DVD and CD Formats
• 
Recording Modes Disk-at-Once
• 
Track-at-Once
• 
Session-at-Once
• 
Copy Speed Selectable
• 
Power Requirements 115-230 VAC Auto Switching
• 
Dimensions
(height x width x depth) 17cm x 17.8cm x 28.9cm
• 
(6 5/8” x 7”x 11 3/8”)
• 
Weight 4.6 kg (10.1 lbs)
• 
Warranty Limited...

www.aleratec.com53
Troubleshooting
If the 1:2 DVD/CD Copy Cruiser Pro HLX Win/Mac is not performing 
as expected, refer to the symptoms in the following table, and follow th\
e 
suggested corrective action.
SymptomCorrective Action
Fail (an issue was 
encountered during the 
operation) Fail messages are usually caused by a problem 
• 
recording onto the blank media.
Errors are more likely to occur with poor quality 
• 
media; store brands, generic or bargain brands 
should be avoided.
Reduce the speed at...

www.aleratec.com
54
Troubleshooting 
Symptom Corrective Action
Target Overflow (the 
amount of data on the disc 
you wish to copy exceeds 
the capacity of the blank 
media) Use the 
•  Disc	Info option to determine the type of 
disc the source is, and its capacity (listed in MB).
To copy CDs that have slightly more information 
• 
than the normal empty capacity, the Overburn 
option must be enabled from Advanced Setup 
menu.
A dual- (double-) layer disc would be required to 
• 
copy a DVD containing more...