Home
>
Aleratec
>
DVD/CD with LightScribe Computer Connected Duplicator
>
Aleratec DVD CD RoboRacer SA Stand Alone 100 Disc Capacity Duplicator User Guide
Aleratec DVD CD RoboRacer SA Stand Alone 100 Disc Capacity Duplicator User Guide
Here you can view all the pages of manual Aleratec DVD CD RoboRacer SA Stand Alone 100 Disc Capacity Duplicator User Guide. The Aleratec manuals for DVD/CD with LightScribe Computer Connected Duplicator are available online for free. You can easily download all the documents as PDF.
Page 2
www.aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is sub\ ject to change without notice. This manual is copyright with all rights reserved. Under copyright laws,\ this manual and the software described within may not be copied, except in th\ e normal use of the product(s) described within or to make a backup copy\ .Copyright© 2010 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www.aleratec.com 1:2 DVD/CD Copy Cruiser...
Page 3
www.aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy. If it is not installed in accordance with the manufacturer’s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a\ Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferen\ ce in a residential...
Page 4
www.aleratec.com Safety Regulations WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only. CAUTION As the laser beam in this DVD/CD Duplicator is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to authorized personnel only. The use of optical instruments with this product will increase eye hazard. This DVD/CD Duplicator is classified as a...
Page 5
www.aleratec.com Table of Contents Introduction ........................................................................\ ............... 1 Check out Aleratec Online! .................................................................... 1 Key Items – 1:2 DVD/CD Copy Cruiser Pro HLX Win/Mac ................2 Front Panel ........................................................................\ ...................... 3 DVD/CD Copy Cruiser Pro HLX Win/Mac Display Panel .................... 4 Precautions...
Page 7
www.aleratec.com1 Introduction Thank you for purchasing this 1:2 DVD/CD Copy Cruiser Pro HLX Win/ Mac. Please read this User Guide thoroughly before using this product. Page 3 shows the front panel of the 1:2 DVD/CD Copy Cruiser Pro HLX • Win/Mac. Page 4 shows the Duplicator LCD Display Panel. • Check out Aleratec Online! www.aleratec.com • www.twitter.com/Aleratec • www.youtube.com/Aleratec •
Page 8
www.aleratec.com 2 Introduction Key Items – 1:2 DVD/CD Copy Cruiser Pro HLX Win/ Mac Note: Choose a Good Location Allow adequate clearance for moving parts. 1. Do not place near heat sources such as radiators or air ducts, or in a 2. place subject to direct sunlight, excessive dust, mechanical vibration o\ r shock. Good care will help assure maximum product life. Improper operating 3. environment and misuse may void the warranty. DisplayPanel LightScribe DVD/CD Recorders (2) Power Switch
Page 9
www.aleratec.com3 Introduction Front Panel 1 Disc Tray This tray is for loading the disc. It will accept 120 mm and 80 mm discs. Please place the disc in the exact center of the tray. 2 Emergency Eject Pinhole In the event of loss of power or failure to open the tray by pressing th\ e Eject button, insert the straightened end of a large paper clip or similar rigid object into the Emergency Eject hole to open the tray. 3 Drive LEDs This indicator lights up when data is being accessed or when data is...
Page 10
www.aleratec.com 4 ENT www.aleratec.comESC Introduction DVD/CD Copy Cruiser Pro HLX Win/Mac Display Panel 1 Display shows all functions and messages 2 ENT button is used to execute a selected function 3 ESC button is used to cancel a selected function 4 UP arrow is used to scroll up through functions or menus 5 DOWN arrow is used to scroll down through functions or menus 4 13 5 2