Aleratec DVD CD RoboRacer SA Stand Alone 100 Disc Capacity Duplicator User Guide

							USER GUIDE
Aleratec  
1:2 DVD/CD Copy Cruiser Pro HLX
TM 
Win/Mac
Part No. 260167 
						

							www.aleratec.com
Copyright/Model Identification
The content of this manual is for informational purposes only and is sub\
ject 
to change without notice. 
This manual is copyright with all rights reserved. Under copyright laws,\
 this 
manual and the software described within may not be copied, except in th\
e 
normal use of the product(s) described within or to make a backup copy\
.Copyright© 2010
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
www.aleratec.com
1:2 DVD/CD Copy Cruiser Pro HLX™ is a trademark of Aleratec, Inc. 
Please record the following information to help expedite any warranty cl\
aim:
Model No.   _____________________ Serial No._____________________
Date Purchased   ________________________________________________  
Place of Purchase   ______________________________________________
NOTE: Please store and track the included software, registration codes and 
parts carefully. Requests for replacement software, registration codes, and/
or parts may incur a fee.   
						

							www.aleratec.com
Radio/TV Interference Statement
The equipment described in this guide emits radio frequency energy. If it 
is not installed in accordance with the manufacturer’s instructions, it may 
cause interference with radio or television reception.
This equipment has been tested and found to comply with the limits for a\
 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interferen\
ce 
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. 
If not installed and used in accordance with the instruction manual, thi\
s 
equipment may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interferen\
ce to 
radio or television reception, which can be verified by turning the equipment 
off and on, the user is encouraged to try to correct the interference by o\
ne or 
more of the following measures:Reorient or relocate the receiving antenna.
• 
Increase the separation between the equipment and the receiver.
• 
Connect the equipment to an electrical outlet on a circuit that is different 
• 
from the circuit to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help.
• 
This equipment has been certified to comply with the limits for a Class B 
computing device, pursuant to FCC Rules. In order to maintain compliance\
 
with FCC regulations, shielded cables must be used with this equipment. \
Operation with non-approved equipment or unshielded cables is likely to \
result in interference to radio and TV reception. The user is cautioned that 
changes and/or modifications made to this equipment, without the approval 
of manufacturer, could void the user’s authority to operate this equipment. 
						

							www.aleratec.com
Safety Regulations
WARNING
To prevent fire or shock hazard, do not expose the 
unit to rain or moisture.
To avoid electrical shock, do not open the 
cabinet. Refer servicing to authorized personnel 
only.
CAUTION
As the laser beam in this DVD/CD Duplicator 
is harmful to the eyes, do not  attempt to 
disassemble the cabinet. Refer servicing to 
authorized personnel only.
The use of optical instruments with this product 
will increase eye hazard.
This DVD/CD Duplicator is classified as a 
CLASS 1 LASER PRODUCT.
The CLASS 1 LASER PRODUCT label is 
located on top of the internal drive enclosure. 
CLASS 1
LASER PRODUCT
LASER KLASSE 1
PRODUKT 
						

							www.aleratec.com
Table of Contents
Introduction ........................................................................\
............... 1
Check out Aleratec Online!  .................................................................... 1
Key Items – 1:2 DVD/CD Copy Cruiser Pro HLX Win/Mac  ................2
Front Panel  ........................................................................\
...................... 3
DVD/CD Copy Cruiser Pro HLX Win/Mac Display Panel  .................... 4
Precautions  ........................................................................\
............... 5
Installation  ........................................................................\
...................... 5
Operation  ........................................................................\
........................ 5
Transportation  ........................................................................\
................. 5
Overview  ........................................................................\
.................... 6
Main Menu  ........................................................................\
...................... 6
Subfunctions  ........................................................................\
................... 7
Using the DVD/CD Duplicator  ........................................................ 10
Inserting Discs  ........................................................................\
.............. 10
Ejecting Discs  ........................................................................\
............... 10
Power Up Sequence  ........................................................................\
...... 11
Quick Operating Sequence Overview  .................................................. 11
Main Menu  ........................................................................\
.................... 12
Setup  ........................................................................\
...................... 28
Advanced Setup  ........................................................................\
..... 40
Using the Duplicator as a DVD/CD-Recorder  ..................................... 50
Specifications  ........................................................................\
......... 52
Troubleshooting  ........................................................................\
..... 53
Technical Support  ........................................................................\
.. 56
Service and Support  ....................................................................... 57
Technical Support FAX Back Form  ...............................................60 
						

							www.aleratec.com 
						

							www.aleratec.com1
Introduction
Thank you for purchasing this 1:2 DVD/CD Copy Cruiser Pro HLX Win/
Mac. Please read this User Guide thoroughly before using this product.
Page 3 shows the front panel of the 1:2 DVD/CD Copy Cruiser Pro HLX 
• 
Win/Mac.
Page 4 shows the Duplicator LCD Display Panel.
• 
Check out Aleratec Online!
www.aleratec.com
•	
www.twitter.com/Aleratec
•	
www.youtube.com/Aleratec
•	 
						

							www.aleratec.com
2
Introduction
Key Items – 1:2 DVD/CD Copy Cruiser Pro HLX Win/
Mac
Note: Choose a Good Location
Allow adequate clearance for moving parts.
1. 
Do not place near heat sources such as radiators or air ducts, or in a 
2. 
place subject to direct sunlight, excessive dust, mechanical vibration o\
r 
shock.
Good care will help assure maximum product life. Improper operating 
3. 
environment and misuse may void the warranty. 
DisplayPanel
LightScribe DVD/CD
Recorders (2)
Power
Switch         
						

							www.aleratec.com3
Introduction
Front Panel
1  Disc Tray
This tray is for loading the disc. It will accept 120 mm and 80 mm 
discs. Please place the disc in the exact center of the tray.
2 Emergency Eject Pinhole
In the event of loss of power or failure to open the tray by pressing th\
e 
Eject button, insert the straightened end of a large paper clip or similar 
rigid object into the Emergency Eject hole to open the tray. 
3 Drive LEDs
This indicator lights up when data is being accessed or when data is 
being recorded on a disc.
4 Eject Button
This button is used to open or close the tray.
1
2
3
4 
						

							www.aleratec.com
4
ENT


www.aleratec.comESC
Introduction
DVD/CD Copy Cruiser Pro HLX Win/Mac Display Panel
1 Display shows all functions and messages
2 ENT 	button is used to execute a selected function
3 ESC	button is used to cancel a selected function
4 UP	arrow is used to scroll up through functions or menus
5 DOWN arrow is used to scroll down through functions or menus
4
13
5
2