Aleratec 15 HDD Copy Cruiser HighSpeed WL User Guide

www.aleratec.com25
Stand-Alone D\fplicat\Bor SA: T\ftorials
Load Master Disc ont\Bo the Hard Drive - continued 
b. Press ENT to enter “Hard Drive Setup” menu and you will see the 
following display:
c. Load your Master Disc on to the Hard Drive. To do so, use the UP or 
DOWN arrow button to navigate to the following screen.
d. Press ENT to enter “Load Partition” menu and you will see the following 
display:
The “228GB” indicates the available capacity of your hard drive in term of GB.
Hard Drive Set\fp1....

www.aleratec.com26
Stand-Alone D\fplicat\Bor SA: T\ftorials
e. You now have the choice to load your Master Disc into a new (empty) 
partition or overwrite one of the existing partitions (if any exist) by 
inputting/modifying the name you desire; or you can simply choose “Auto 
Generate” to have the system automatically generate a partition name for 
you. Afterwards, simply press the UP or DOWN arrow button to find your 
desired selection and press ENT to submit your selection. You will see the 
following...

www.aleratec.com27
Stand-Alone D\fplicat\Bor SA: T\ftorials
Load Master Disc ont\Bo the Hard Drive - continued
h. Press ENT button to confirm. Once your Master Disc has been recognized. 
The loading progress indicator will be displayed and you will see the 
following:
i. Once your Master Disc has been loaded completely, you will see the 
following display:
Press the ENT button to go back to the “Hard Drive Setup” menu.
“4000MB” indicates the total capacity of your Master Disc.
“423MB” indicates the...

www.aleratec.com28
Stand-Alone D\fplicat\Bor SA: T\ftorials
Rename Existing Ha\Brd Drive Partition \BName
When you load your Master Disc to a hard drive partition, you are asked to give it a 
name. You can rename it at anytime afterwards (including the Reserved Partition). 
To rename your existing hard drive partition name, do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the...

www.aleratec.com29
Stand-Alone D\fplicat\Bor SA: T\ftorials
Rename Existing Ha\Brd Drive Partition \BName - continued
7. Rename the partition you’ve just selected.
To enter a partition name, use the UP or DOWN button to select the character 
and use ESC or ENT button to move the cursor position. When you are 
finished, move the cursor to OK and press ENT. For example, if I want to 
rename the image from “FUN” to “FUN2”, do the following:
a. Move the cursor to the forth position by pressing ENT until you...

www.aleratec.com30
Stand-Alone D\fplicat\Bor SA: T\ftorials
Delete Existing Ha\Brd Drive Partition \BPermanently
If for some reason you need to delete your existing hard drive partition permanently, 
do the following:
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
3. Use the UP or DOWN arrow button to navigate to the following screen.
4. Press ENT to enter the “Delete Partition” menu.  You will see...

www.aleratec.com31
Stand-Alone D\fplicat\Bor SA: T\ftorials
Delete Existing Ha\Brd Drive Partition \BPermanently - continued 
7. You will be directed back to the “Hard Drive Setup” menu. You will see the 
following display:
Hard Drive Set\fp4. Delete Partition\BCOPYUSBPRINTSOURCE
ESCENT

      

www.aleratec.com32
Stand-Alone D\fplicat\Bor SA: T\ftorials
How to Make Copies fr\Bom the Hard Drive 
1. Load a master disc to the HDD if it is not already loaded and make sure Source 
is set to the Hard Drive.
2. Go back to “COPY” Menu.
a. Use UP or DOWN arrow button to navigate to the following screen.
3. Start the Copy Process.
a. Now, please insert your blank discs into the Writer Trays (make sure the 
Reader Tray is empty) and press ENT button to enter the “COPY” menu. 
You will be asked to choose...

www.aleratec.com33
Stand-Alone D\fplicat\Bor SA: T\ftorials
You can select “No Counter” if you prefer to copy continuously with no 
interruption. (It will still count the number of copies, but it will not notify 
you when to stop.) To select the “No Counter”, simply press ENT button 
when you see the screen above. Then skip below and continue on to step 
“d”.
Or, you can select “Specify Counter” to specify the number of copies (1 to 
9999) by pressing the UP or DOWN navigation button to the below...

www.aleratec.com34
Stand-Alone D\fplicat\Bor SA: T\ftorials
How to Make Copies fr\Bom the Hard Drive - continued
vii. Press DOWN button consecutively until “1” is displayed.
viii. Now, we have “0021” displayed and then, press ENT once and the 
cursor is now moved to OK.
ix. Then, press ENT once to submit your counter value.
Now you will see following screen:
Note: If the ABOVE \bcreen i\b di\bpla\byed for more than \b2 minute\b, 
plea\be check your B\blank Di\bc\b for qualit\by.
d. Please allow 5-10...