Air Live Router WT-2000ARM User Manual

 
AirLive WT-2000ARM User’s Manual 
 36
through RIP broadcasts. Select “No”, this routing path will be kept 
private and it is not included in RIP broadcasts. 
 NAT 
 
 
 
 NAT 
Network Address Translation (NAT) allows multiple users at your local site to access the Internet 
through a single Public IP Address or multiple Public IP Addresses. NAT provides Firewall protection 
from hacker attacks and has the flexibility to allow you to map Private IP Addresses to Public IP 
Addresses for key services such...

 
AirLive WT-2000ARM User’s Manual 
 37
 DMZ 
The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP 
Address as the DMZ Host, all incoming packets will be checked by the firewall and NAT algorithms 
then passed to the DMZ Host. 
 
For example, if you have a local client PC that cannot run an Internet application (e.g. Games) 
properly from behind the NAT firewall, then you can open the client up to unrestricted two-way Internet 
access by defining a DMZ Host....

 
AirLive WT-2000ARM User’s Manual 
 38
Virtual Server allows you to re-direct a particular service port number (from the Internet/WAN) to a 
particular LAN private IP Address and its service port number.
 
 
 
 
Parameter Description 
Virtual Server for  Show the Virtual Server setting is for single or multiple IP Addresses.
  
Rule Index  Choose the rule number. 
 
Start Port Number  Enter the start port number. 
  
End Port Number  Enter the end port number. 
 
Parameter Description 
Local IP Address...

 
AirLive WT-2000ARM User’s Manual 
 39
 
 
Parameter Description 
ADSL Mode  The default setting is “Auto Sync-Up”. This mode will automatically 
detect the ADSL mode including ADSL2+, ADSL2, G.DMT, T1.413 
and G.lite. If you are not sure how to select the ADSL mode, please 
contact with your ISP. 
  
ADSL Type  Check with your ISP about the ADSL type of the DSLAM device they 
use. 
 
 
 
 
 
 
 
 
 
  

 
AirLive WT-2000ARM User’s Manual 
 40
 Access Management 
 ACL 
If you want to restrict users from accessing certain Internet applications/services such as Internet 
websites, email, FTP etc., then this is the place to set that configuration. Access Control allows users 
to define the traffic type permitted in your LAN or WAN. You can control which computer can have 
access to these services by entering the IP Address of the computer. 
 
 
 
Parameter Description 
ACL  Activate or deactivate the Access...

 
AirLive WT-2000ARM User’s Manual 
 41
interface. These services include Web, Telnet, Ping, FTP and 
SNMP.  
  
Interface  Select the interface that the user is allowed to use services through 
it. It includes LAN, WAN or Both. 
 
 
 IP Filter 
You can forbid some users accessing to the Web Management of the router by entering the IP 
Addresses here. The default IP 0.0.0.0 allows any user to use the service to remotely manage the 
router. 
 
 
z IP Filter Set Editing 
 
Parameter Description 
IP Filter...

 
AirLive WT-2000ARM User’s Manual 
 42
z IP Filter Rule Editing 
 
Parameter Description 
IP Filter Rule Index  This is the item number to record the setting rule. 
  
Active  Select “Yes” to enable the current rule, select “No” to cancel the 
current rule. 
  
Source IP Address  Enter the start IP Address which will be monitored. 
  
Subnet Mask  Enter the Subnet Mask based on the Source IP Address. 
  
Port Number  LAN users use port numbers to distinguish one network application 
over another such as...

 
AirLive WT-2000ARM User’s Manual 
 43
 SNMP 
Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is 
used for collecting information and configuring the network devices. This router supports SNMP agent 
function, which allows a manager station to manage and monitor the router through the network.  
 
 
 
Parameter Description 
Get Community  Enter the password for the incoming Get- and GetNext requests from 
the management station. 
  
Set Community  Enter the...

 
AirLive WT-2000ARM User’s Manual 
 44
 UPnP 
When the UPnP function is enabled, the router can be detected by UPnP compliant system such as 
Windows XP. The router will be displayed in the Neighborhood of Windows XP, so you can directly 
double click the router or right click the router and select “Invoke” to configure the router through web 
browser. 
 
 
 
Parameter Description 
UPnP  Activated or deactivated the UPnP function.  
  
Auto-configured  Select this check box to allow UPnP-enabled...

 
AirLive WT-2000ARM User’s Manual 
 45
 DDNS 
DDNS allows you to map the static domain name to a dynamic IP address. You must get an account, 
password and your static domain name from the DDNS service providers. 
 
 
 
Parameter Description 
Dynamic DNS  Activated or deactivated the DDNS function. 
  
Service Provider  This router supports DynDNS service provider. 
  
My Host Name  Enter the domain name assigned to your router by the service 
provider. 
  
E-mail Address  Enter the E-mail address...