Air Live Router WL-1000UR User Manual

							
 71
In Command Mode: 
Linux has built-in LPR client ,You 
can utilize it for printing.   
You can manual set it or via the tool printtool in X-windows.   
PS: The spool name is lp------all lowercase letter.   
Below is my setting.   
/etc/printcap  
------------------------------------------------------------------------------  
lp:  
:sd=/var/spool/lpd/lp:  
:mx#0:  
:sh:  
:rm=192.168.1.254:  
:rp=lp: -------------->key point   
:if=/var/spool/lpd/lp/filter:  
------------------------------------------------------------------------------  
Then add the corresponding directory   
 
#mkdir /var/spool/lpd/lp   
Too see the detail ,please refer to the online manual in linux.   
#man printcap
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 72
5.5 Configuring on Apple PC 
 
1.First, go to Printer center (Printer list) and add printer     
 
 
 
2.Choose  IP print and setup  printer ip address  (router Lan ip address). 
3.Disable “ Default Queue of    Server .” And fill in ‘ lp ‘ in Queue name item. 
4.Printer Model: Choose “ General” or Printer as below. 
 
  
						

							
 73
A
A
A p
p
p p
p
p e
e
e n
n
n d
d
d i
i
i x
x
x  
 
  A
A
A  
 
   
 
  T
T
T C
C
C P
P
P /
/
/ I
I
I P
P
P  
 
  C
C
C o
o
o n
n
n f
f
f i
i
i g
g
g u
u
u r
r
r a
a
a t
t
t i
i
i o
o
o n
n
n  
 
  f
ff
o
o
o r
r
r  
 
  W
W
W i
i
i n
n
n d
d
d o
o
o w
w
w s
s
s  
 
  9
9
9 5
5
5 /
/
/ 9
9
9 8
8
8  
 
 
 
This section introduces you how to install TCP/IP  protocol into your personal computer. And suppose 
you have been successfully installed one network card on your personal computer. If not, please refer 
to your network card manual. Moreover, the Section  B.2 tells you how to set TCP/IP values for working 
with this NAT Router correctly. 
A.1 Install TCP/IP Protocol into Your PC 
1. Click  Start button and choose  Settings, then click  Control Panel . 
2. Double click  Network icon and select  Configuration tab in the Network window. 
3. Click  Add button to add network component into your PC. 
4. Double click  Protocol to add TCP/IP protocol. 
 
 
 
5. Select  Microsoft item in the manufactures list. And choose  TCP/IP in the Network Protocols. Click 
OK  button to return to Network window. 
 
  
						

							
 74 
6.  The TCP/IP protocol shall be listed in the Network window. Click  OK to complete the install 
procedure and restart your PC to enable the TCP/IP protocol. 
 
A.2 Set TCP/IP Protocol for Working with NAT Router 
1. Click  Start button and choose  Settings, then click  Control Panel . 
2. Double click  Network icon. Select the TCP/IP line that has been associated to your network card in 
the  Configuration  tab of the Network window. 
 
 
3. Click  Properties  button to set the TCP/IP protocol for this NAT Router. 
4.  Now, you have two setting methods:  
						

							
 75
 
a. Select  Obtain an IP address automatically  in the IP Address tab. 
 
b.  Don’t input any value in the Gateway tab. 
 
  
						

							
 76
c. Choose 
Disable DNS  in the DNS Configuration tab. 
 
  B.  Configure IP manually 
a. Select  Specify an IP address  in the IP Address tab. The default IP address of this 
product is 192.168.1.254. So  please use 192.168.1.xxx (xxx  is between 1 and 253) for 
IP Address field and 255.255. 255.0 for Subnet Mask field. 
  
						

							
 77
 
b.  In the Gateway tab, add the IP address of  this product (default IP is 192.168.1.254) in 
the New gateway field and click  Add button. 
 
 
c.  In the DNS Configuration  tab, add the DNS values which  are provided by the ISP into 
DNS Server Search Order field and click  Add button. 
                                    
						

							
 78
A
A
A p
p
p p
p
p e
e
e n
n
n d
d
d i
i
i x
x
x  
 
  B
B
B  
 
   
 
  8
8
8 0
0
0 2
2
2 .
.
. 1
1
1 x
x
x  
 
  S
S
S e
e
e t
t
t t
t
t i
i
i n
n
n g
g
g  
 
 
 
 
Figure 1: Testing Environment (U se Windows 2000 Radius Server) 
1 Equipment Details  PC1:  
Microsoft Windows XP Profession al without Service Pack 1. 
D-Link DWL-650+ wireless LAN adapter 
Driver version: 3.0.5.0  (Driver date: 03.05.2003) 
PC2:   Microsoft Windows XP Professi onal with Service Pack 1a. 
Z-Com XI-725 wireless LAN USB adapter 
Driver version: 1.7.29.0  (Driver date: 10.20.2001) 
Authentication Server : Windows 2000 RADIUS server  with Service Pack 3 and HotFix 
Q313664. 
    Note. Windows 2000 RADIUS  server only supports PEAP after upgrade to service pack 3 
and HotFix Q313664  (You can get more information from   
http://support.microsoft.com/def ault.aspx?scid=kb; en-us;313664
) 
2 DUT   
Configuration:  
						

							
 79
1.Enable DHCP server. 
2.WAN setting: static IP address. 
3.LAN IP address: 192.168.1.254/24. 
4.Set RADIUS server IP. 
5.Set RADIUS server shared key. 
6.Configure WEP key and 802.1X setting. 
  The following test will use the inbuilt 802. 1X authentication method such as ,EAP_TLS, 
PEAP_CHAPv2(Windows XP with SP1 only), and PEAP_ TLS(Windows XP with SP1 only) using 
the Smart Card or other Certificat e of the Windows XP Professional. 
 
3. DUT and Windows 2000 Radius Server Setup 
3-1-1.   Setup Windows 2000 RADIUS Server 
We have to change authentication method to MD5_Challenge or using smart   
card or other certificate  on RADIUS server according  to the test condition. 
3-1-2.   Setup DUT  1.Enable the 802.1X (che ck the “Enable checkbox“). 
2.Enter the RADIUS server IP. 
3.Enter the shared key. (The key shar ed by the RADIUS server and DUT). 
4.We will change 802.1X encryption key length to fit the variable test    condition. 
3-1-3.   Setup Network adapter on PC  1.Choose the IEEE802.1X as the authentication method. (Fig 2) Note.  Figure 2 is a setting picture of Windows  XP without service pack 1. If users 
upgrade to service pack 1, then they ca n’t see MD5-Challenge from EAP type 
list any more, but they will get a  new Protected EAP (PEAP) option. 
2.Choose MD5-Challenge or Smart Ca rd or other Certificate as the EAP 
type.  3.If choosing use smart card or the certif icate as the EAP type, we select to   
use a certificate on this computer. (Fig 3)  
						

							
 80
      4. We will change EAP type to fit the variable test condition. 
 
Figure 2: Enable IEEE 802.1X access control