Air Live Router WL-1000UR User Manual

							
 61
5.2 Configuring on Windows NT Platforms 
 
The configuration procedure for a Windows NT platfo rm is similar to that of Windows 95/98 except the 
screen of printer  Properties: 
 
 
 
Compared to the procedure in last section, the selection of  Details is equivalent to the selection of 
Ports , and Port Settings  is equivalent to  Configure Port. 
 
 
 
 
 
 
 
 
  
						

							
 62
5.3 Configuring on Windows 2000 and XP Platforms 
 
Windows 2000 and XP have built-in LPR client,  users could utilize this feature to Print.   
You have to install your Printer Driver on LPT1 or other ports before you preceed the following 
sequence. 
 
1.Open Printers and Faxs
. 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 63
2.Select “Ports” page, Click “Add Port…”            
 
 
 
3. Select “Standard TCP/IP Port”, and then click “New Port…” 
 
 
 
 
  
						

							
 64
4.Click Next and then provide the following information: 
Type address of server providing LPD 
that is our NAT device:192.168.1.254 
          
 
 
1. Select Custom, and then click “Settings…” 
 
      
 
  
						

							
 65
6. Select “LPR”, type ” 
lp“ lowercase letter in “Queue Name:” 
And enable “LPR Byte Counting Enabled”. 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 66
7.Apply your settings 
           
 
  
						

							
 67
5.4 Configuring on Unix-like based Platforms 
 
Please follow the traditional configuration procedure on Unix platforms to  setup the print server of this 
product. The printer name is “lp.” 
In X-Windows, for example, In Redhat Platforms, 
Please follow the below steps to configure your prin ter on Red Hat 9.0.1. Start from the Red Hat---> 
System Setting---> Printing.
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							
 68
2. Click New---> Forward. 
 
 
1. Enter the Pinter Name, Comments then forward. 
 
 
 
 
 
  
						

							
 69
4. Select LPD protocol and then forward. 
 
 
 
5. Enter Router LAN IP Address and the queue name lp. Then forward. 
 
 
 
 
 
 
 
 
  
						

							
 70
6. Select the Printer Brand and Model Name. Then Forward. 
 
 
 
7. Click Apply to finish setup. 
 
 
 
8. At last you must click Apply on the t oolbox to make the change take effective.