Air Live Router WL-1000UR User Manual

							
 41
Control table 
 
Control table is the table at the botto m of the MAC Address Control page. 
Each row of this table indicates the MAC address and the expected IP 
address mapping of a client. There are four columns in this table: 
 
MAC Address  MAC address indicates a specific client. 
IP Address Expected IP address of the corresponding 
client. Keep it empty if you dont care its IP 
address. 
C 
When 
Connection control  is checked, 
check  C will allow the corresponding 
client to connect to this device. 
A  When 
Association control  is checked, 
check  A will allow the corresponding 
client to associate to the wireless LAN. 
 
In this page, we provide the following Combobox  and button to help you to input the MAC address. 
 
You can select a specific client in the “DHCP clie nts” Combobox, and then click on the “Copy to” button 
to copy the MAC address of the client you sele ct to the ID selected in the “ID” Combobox. 
 
Previous page and Next Page  To make this setup page simple and clear, we have divided the 
“Control table” into several pages. You can use these buttons to 
navigate to different pages. 
  
						

							
 42
4.6.5 Miscellaneous Items 
 
 
Remote Administrator Host/Port 
In general, only Intranet user can  browse the built-in web pages to perform administration task. This 
feature enables you to perform administration task from  remote host. If this feature is enabled, only the 
specified IP address can perform remote administrati on. If the specified IP address is 0.0.0.0, any host 
can connect to this product to perform administrati on task. You can use subnet mask bits /nn notation 
to specified a group of trusted IP addr esses. For example, 10.1.2.0/24.   
NOTE: When Remote Administration is enabled, t he web server port will be shifted to 88. You can 
change web server port to other port, too. 
Administrator Time-out 
The time of no activity to logout automatically.  Set it to zero to disable this feature.   
Discard PING from WAN side 
When this feature is enabled, any host on the WAN cannot ping this product.   
SPI Mode 
When this feature is enabled, the r outer will record the packet information pass through the router like 
IP address, port address, ACK, SEQ number and so  on. And the router will check every incoming 
packet to detect if this packet is valid.   
DoS Attack Detection 
When this feature is enabled, t he router will detect and log the DoS attack comes from the Internet. 
Currently, the router can detect the following DoS  attack: SYN Attack, WinNuke, Port Scan, Ping of 
Death, Land Attack etc. 
 
 
 
  
						

							
 43
4.7 Advanced Settings 
 
 
4.7.1 System Time 
 
 
  
						

							
 44
Get Date and Time by NTP Protocol 
Selected if you want to Get Date and Time by NTP Protocol.   
Time Server 
Select a NTP time server to consult UTC time   
Time Zone 
Select a time zone where this device locates.   
Set Date and Time manually 
Selected if you want to Set Date and Time manually.   
Set Date and Time manually 
Selected if you want to Set Date and Time manually. 
Function of Buttons 
Sync Now:
 Synchronize system time with network time server 
Daylight Saving: Set up where the location is. 
 
4.7.2 System Log 
 
This page support two methods to export system logs  to specific destination by means of syslog(UDP) 
and SMTP(TCP). The items you  have to setup including:    
						

							
 45
IP Address for Syslog 
Host IP of destination where syslogs will be sent to. 
Check 
Enable  to enable this function.   
E-mail Alert Enable 
Check if you want to enable Email alert (send syslog via email).   
SMTP Server IP and Port 
Input the SMTP server IP and port, which are connect ed with :. If you do not specify port number, the 
default value is 25. 
For example, mail.your_url.com or 192.168.1.100:26.   
Send E-mail alert to 
The recipients who will rece ive these logs. You can assign more than 1 recipient, using ; or , to 
separate these email addresses.
 
 
4.7.3 Dynamic DNS 
 
 
To host your server on a changing  IP address, you have to use dynamic domain name service (DDNS).   
So that anyone wishing to reach your host only need s to know the name of it. Dynamic DNS will map 
the name of your host to your cu rrent IP address, which changes each  time you connect your Internet 
service provider.   
Before you enable  Dynamic DNS, you need to register an account on one of these Dynamic DNS 
servers that we list in  provider field.   
To enable  Dynamic DNS  click the check box next to  Enable in the DDNS  field.  
						

							
 46
Next you can enter the appropriate info
rmation about your Dynamic DNS Server. 
You have to define: 
Provider 
Host Name 
Username/E-mail 
Password/Key 
You will get this information when you r egister an account on a Dynamic DNS server. 
Example: 
z   
After Dynamic DNS setting is configured, click the save button.  
						

							
 47
4.7.4 SNMP Setting 
 
 
In brief, SNMP, the Simple Network Management Protoc ol, is a protocol designed to give a user the 
capability to remotely manage a computer netwo rk by polling and setting terminal values and 
monitoring network events.   
Enable SNMP 
You must check either Local or Remote or both to  enable SNMP function. If Local is checked, this 
device will response request from LA N. If Remote is checked, this device will response request from 
WAN.  
Get Community 
Setting the community of GetReque st your device will response.   
Set Community 
Setting the community of SetReque st your device will accept.    
						

							
 48
4.7.5 Routing Table 
 
 
Routing Tables allow you to determine which physical interface address to use for outgoing IP data 
grams. If you have more than one routers and subnets,  you will need to enable routing table to allow 
packets to find proper routing path and allow different subnets to communicate with each other. 
Routing Table settings are settings used  to setup the functions of static.
 
Static Routing: For static routing, you can specify up to  8 routing rules. You can enter the destination 
IP address, subnet mask, gateway, hop for each routi ng rule, and then enable or disable the rule by 
checking or unchecking the Enable checkbox.  
						

							
 49
Example: 
 
 
 
Configuration on NAT Router 
Destination           SubnetMask        Gateway         Hop        Enabled 
192.168.1.0          255.255.255.0      192.168.123.216       1            ˇ 
192.168.0.0          255.255.255.0      192.168.123.103       1            ˇ 
 
So if, for example, the client3 wanted to send an  IP data gram to 192.168.0.2, it would use the above 
table to determine that it had to  go via 192.168.1.103 (a gateway),   
And if it sends Packets to 192. 168.1.11 will go via 192.168.1.216 
Each rule can be enabled or disabled individually. 
After  routing table  setting is configured, click the  save button.  
						

							
 50
4.7.6 Schedule Rule 
 
 
 
You can set the schedule time to decide which servic e will be turned on or off. Select the “enable” item. 
Press  “Add New Rule” 
 
You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. 
The following example configure “ftp time” as everyday 14:10 to 16:20