Aiphone IS IP Standard Setting Manual
Here you can view all the pages of manual Aiphone IS IP Standard Setting Manual. The Aiphone manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Setting the timer [Timer setting]
Set the time for each operation.
Click 1 Timer setting in the table of contents.
Set the time for the following operations respectively.2
The setting range is displayed on the right side of each * input box.
[Call]:
•
Set the duration of call from door stations and room sub
stations to [Normal], [Priority] or [Urgent].
[Communication]:
•
Set the duration of communication between stations
in the local...](http://img.usermanuals.tech/thumb/238/3768/w300_is-ip-standard-setting-manual-1478646241_d-30.png "Page 31
31
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Setting the timer [Timer setting]
Set the time for each operation.
Click 1 Timer setting in the table of contents.
Set the time for the following operations respectively.2
The setting range is displayed on the right side of each * input box.
[Call]:
•
Set the duration of call from door stations and room sub
stations to [Normal], [Priority] or [Urgent].
[Communication]:
•
Set the duration of communication between stations
in the local...")
31 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Setting the timer [Timer setting] Set the time for each operation. Click 1 Timer setting in the table of contents. Set the time for the following operations respectively.2 The setting range is displayed on the right side of each * input box. [Call]: • Set the duration of call from door stations and room sub stations to [Normal], [Priority] or [Urgent]. [Communication]: • Set the duration of communication between stations in the local...
Page 32
![Page 32
32
M Settings on [Remote site master call] setting
window
You can set a station (master station, door station or room
sub station) that receives a call from a master station in a
remote site. One station can be set for each priority.
Click
1) Reference for “Normal”.
All the registered stations are displayed in the list in
another window.
Check the box for the target station in the list, and then
2) click Close.
The current window closes and the set station is
displayed in the [Remote site master...](http://img.usermanuals.tech/thumb/238/3768/w300_is-ip-standard-setting-manual-1478646241_d-31.png "Page 32
32
M Settings on [Remote site master call] setting
window
You can set a station (master station, door station or room
sub station) that receives a call from a master station in a
remote site. One station can be set for each priority.
Click
1) Reference for “Normal”.
All the registered stations are displayed in the list in
another window.
Check the box for the target station in the list, and then
2) click Close.
The current window closes and the set station is
displayed in the [Remote site master...")
32 M Settings on [Remote site master call] setting window You can set a station (master station, door station or room sub station) that receives a call from a master station in a remote site. One station can be set for each priority. Click 1) Reference for “Normal”. All the registered stations are displayed in the list in another window. Check the box for the target station in the list, and then 2) click Close. The current window closes and the set station is displayed in the [Remote site master...
Page 33
33 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Telephone setting (North America only) For example, the following actions are possible by using telephone. Refer to the “OPERATION MANUAL” for details. • A communication is enabled between a sub station (other than IS-IPDV and IS-IPDVF) and telephone by setting the master station to transfer a call from a sub station to telephone. • A door release or chime paging is possible from the registered telephone set. The following settings can...
Page 34
![Page 34
34
Video setting
Click 1 Video setting in the table of contents.
Set the following settings for video quality.
2
[Frame Rate]:•
Set the frame rate selecting “1”, “2”, “5”, “7.5”, “10” or “15”
fps from the pull-down menu.
[Quality]:
•
Set the video quality selecting “Low”, “Middle”, “High” or
“Excellent” from the pull-down menu.
Click 3 Temporarily stored to save the current setting
results temporarily.
If you wish to cancel the setting results you have made, * click a title in the table of...](http://img.usermanuals.tech/thumb/238/3768/w300_is-ip-standard-setting-manual-1478646241_d-33.png "Page 34
34
Video setting
Click 1 Video setting in the table of contents.
Set the following settings for video quality.
2
[Frame Rate]:•
Set the frame rate selecting “1”, “2”, “5”, “7.5”, “10” or “15”
fps from the pull-down menu.
[Quality]:
•
Set the video quality selecting “Low”, “Middle”, “High” or
“Excellent” from the pull-down menu.
Click 3 Temporarily stored to save the current setting
results temporarily.
If you wish to cancel the setting results you have made, * click a title in the table of...")
34 Video setting Click 1 Video setting in the table of contents. Set the following settings for video quality. 2 [Frame Rate]:• Set the frame rate selecting “1”, “2”, “5”, “7.5”, “10” or “15” fps from the pull-down menu. [Quality]: • Set the video quality selecting “Low”, “Middle”, “High” or “Excellent” from the pull-down menu. Click 3 Temporarily stored to save the current setting results temporarily. If you wish to cancel the setting results you have made, * click a title in the table of...
Page 35
![Page 35
35
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
E-mail setting
You can send an e-mail when calling or send error messages
etc. by e-mail. Up to 3 mail addresses can be set.
NOTES:
Prepare an e-mail account for this function beforehand.
Make sure to enter the system name at [Network setting:
Individual] – [System name] to display the title with an e-mail.
Make sure to enter primary and/or secondary DNS server
information at [
Network setting: Individual] (to all the IP units).
The...](http://img.usermanuals.tech/thumb/238/3768/w300_is-ip-standard-setting-manual-1478646241_d-34.png "Page 35
35
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
E-mail setting
You can send an e-mail when calling or send error messages
etc. by e-mail. Up to 3 mail addresses can be set.
NOTES:
Prepare an e-mail account for this function beforehand.
Make sure to enter the system name at [Network setting:
Individual] – [System name] to display the title with an e-mail.
Make sure to enter primary and/or secondary DNS server
information at [
Network setting: Individual] (to all the IP units).
The...")
35 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM E-mail setting You can send an e-mail when calling or send error messages etc. by e-mail. Up to 3 mail addresses can be set. NOTES: Prepare an e-mail account for this function beforehand. Make sure to enter the system name at [Network setting: Individual] – [System name] to display the title with an e-mail. Make sure to enter primary and/or secondary DNS server information at [ Network setting: Individual] (to all the IP units). The...
Page 36
36 Registering sound fi les for chime sources on the central control unit (IS-CCU) Register sound data as chime sources. Make this setting on the web browser of the central control * unit (IS-CCU) connected to the host IP control unit (IS-IPC). The sound fi les are also registered to the central control unit (IS-CCU). Confi rm how the central control unit (IS-CCU) is 1 connected to the system. Internet Internet Connected to LAN Not connected to LANAB RouterRouter IS-IPCIS-IPC IS-CCUIS-CCU Access the web...
Page 37
![Page 37
37
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
MAINTENANCE
This section describes the use of functions for the system maintenance. These functions are available on the web server.
Initializing the system [Initialization]
You can reset the system settings to factory default.
Access the web browser and log in. 1 (→P. 17)
Click
2 Initialization in the table of contents.
Click 3 Initialization.
Downloading system log [System log]
You can acquire the system operation log.
Access the web...](http://img.usermanuals.tech/thumb/238/3768/w300_is-ip-standard-setting-manual-1478646241_d-36.png "Page 37
37
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
MAINTENANCE
This section describes the use of functions for the system maintenance. These functions are available on the web server.
Initializing the system [Initialization]
You can reset the system settings to factory default.
Access the web browser and log in. 1 (→P. 17)
Click
2 Initialization in the table of contents.
Click 3 Initialization.
Downloading system log [System log]
You can acquire the system operation log.
Access the web...")
37 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM MAINTENANCE This section describes the use of functions for the system maintenance. These functions are available on the web server. Initializing the system [Initialization] You can reset the system settings to factory default. Access the web browser and log in. 1 (→P. 17) Click 2 Initialization in the table of contents. Click 3 Initialization. Downloading system log [System log] You can acquire the system operation log. Access the web...
Page 38
38
Setting Information Memo
Record your settings information. It will need when resetting or maintenance.
Host unit
Network setting: Individual
Static IP Address Subnet Mask
Default Gateway
Primary DNS Server Secondary DNS Server
MAC address
Unit name
Connection port Connection Password
Network setting: Common
Global IP address
Connection port: global
Multicast address 1: 2:
3: 4:
5:
Audio/video port
Administrator setting
ID Password...
Page 39
AIPHONE CO., LTD., NAGOYA, JAPAN AIPHONE CORPORATION, BELLEVUE, WA, USA AIPHONE S.A.S., LISSES-EVRY, FRANCE http://www.aiphone.net/