Aiphone IS IP Network Direct Setting Manual

21
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Making detailed settings to stations 
[System setting – Advanced station settings]
Make detailed settings for the registered stations. The settings 
can be made to a station individually, or multiple stations of the 
same type at a time. The setting items differ from the station 
type. First select a station (or stations), and then open the 
“Advanced settings” window to make the settings.
Basic setting procedure
Click Advanced station...

22
B Settings on [Other] window
[Transmit volume boost at PTT]:• 
Select whether to increase the press-to-talk sound 
volume transmitted to the stations (ON) or not (OFF).
[Camera zoom image preset]:
• 
Select the default of camera’s Zoom/Wide function at 
calling from the 9 zoom positions and 0 (wide) from the 
pull-down menu.
[Call acknowledge tone on/off]:
• 
Select whether to sound the call acknowledge tone of 
door station (ON) or not (OFF).
[Backlight adjustment]:
• 
Select the method of adjusting...

23
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Registering stations to zones
[System setting – Zone setting]
Assign stations to the registered zones.
Click 1 Zone setting in the table of contents.
Select a zone from the pull-down menu.2 
Click 3 Reference to display all the registered stations 
in your site.
  Another window opens and the registered stations are 
displayed in the list.
Check to select the target stations.4 
Select stations in the following ways.
Select stations by...

24
Setting transfer schedule 
[Transfer setting – Transfer schedule setting]
You can set a weekly transfer schedule and individual daily 
schedule.
The settings can be made 1 year ahead.
* 
Click 1 Transfer schedule setting in the table of 
contents.
Make the settings by clicking 
2 Weekly schedule 
and 
Individual schedule respectively to open the 
corresponding window.
Individual schedule*  should be clicked after the target 
date is clicked on the calendar.
Make the settings in the displayed...

25
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Setting the timer [Timer setting]
Set the time for each operation.
Click 1 Timer setting in the table of contents.
Set the time for the following operations respectively.2 
The setting range is displayed on the right side of each * input box.
[Call]:
• 
Set the duration of call from door stations to [Normal], 
[Priority] or [Urgent].
[Communication]:
• 
Set the duration of communication between stations in 
the system including between...

26
Setting stations to receive calls and 
zones to receive paging from remote sites 
[Remote site pilot call setting]
Set the master stations and sub stations to receive calls, and 
zones to receive paging from remote sites.
The setting can be made for each priority individually.
* 
Click 1 Remote site pilot call setting in the table of 
contents.
Make the setting by clicking 2 Advanced settings for 
the setting items 
G, H, I respectively to open the 
corresponding window.
Make the setting in the...

27
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Video setting
Click 1 Video setting in the table of contents.
Set the following settings for video quality.
2 
[Frame Rate]:• 
Set the frame rate selecting “1”, “2”, “5”, “7.5”, “10” or “15”


fps from the pull-down menu.
[Quality]:
• 
Set the video quality selecting “Low”, “Middle”, “High” or 
“Excellent” from the pull-down menu.
Click 3 Temporarily stored to save the current setting 
results temporarily.
If you wish to cancel the setting...

28
E-mail setting
You can send an e-mail when calling or send error messages 
etc. by e-mail. Up to 3 mail addresses can be set.
NOTES:
Prepare an e-mail account for this function beforehand.

Make sure to enter the system name at [Network setting: 
Individual] – [System name] to display the title with an e-mail.
Make sure to enter primary and/or secondary DNS server 

information at [
Network setting: Individual] to all the IP units.
Click 1 E-mail setting in the table of contents.
Set the following...

29
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
MAINTENANCE
This section describes the use of functions for the system maintenance. These functions are available on the web server.
Initializing the system [Initialization]
You can reset the system settings to factory default.
Access the web browser and log in. 1 (→P. 14)
Click 
2 Initialization in the table of contents.
Click 3 Initialization.
Downloading system log [System log]
You can acquire the system operation log.
Access the web...

30
Setting Information Memo
Record your settings information. It will need when resetting or maintenance.
Host unit
Network setting: Individual
Static IP Address Subnet Mask
Default Gateway
Primary DNS Server Secondary DNS Server
MAC address
Unit name
Connection port Connection Password
Network setting: Common
Global IP address
Connection port: global
Multicast address     1: 2:
                                 3: 4:
                                 5:
Audio/video port
Administrator setting
ID Password...