Aiphone IS IP Network Direct Setting Manual
Here you can view all the pages of manual Aiphone IS IP Network Direct Setting Manual. The Aiphone manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 11
11 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Flow 3 (All units: IP addresses are assigned by the DHCP server automatically) Write down the MAC addresses of all the IP units to be used in the system in advance by using the “Setting Information Memo” (→P. 30) etc. The MAC address is labeled on each unit. * Set the router (or DHCP server) so that it assigns a static IP address to the IP unit to be used as the IP host unit. : Settings on the IP host unit : Settings on the IP client...
Page 12
12 Complete the network settings for your site by following Flow 1, Flow 2 or Flow 3. (→P. 9-11) Get the following information for the remote sites you will connect with your site. Global IP address Connection port: global Connection Password Set the following setting items on the IP host unit. (→ P. 16) [Network setting: Individual] : Default Gateway [Network setting: Common] : UPnP Global IP address Audio/video port Make the [Area/Site registration] on the IP host unit. (→ P. 18) * Select Site...
Page 13
13 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM STARTING UP THE SYSTEM AND PREPARING FOR THE SETTINGS The system settings are mainly made on the PC by accessing the web browser for the settings incorporated with the IP unit as the IP host unit. It is recommended to use only one PC for the settings that is connected to the system. System requirements for PC Your PC and operating environment must meet the following system requirements to make the settings. Network 10BASE-T Ethernet,...
Page 14
14 Turn on the power to the IP unit.2 If the unit is connected to a switch or injector that has * a PoE function, the power is being supplied. If a power supply unit is connected to the unit, turn on the power of the power supply unit. Turn on all the units constituting the system depending * on the network setting method. The status LED of an IP video door station changes from * red lighting to orange blinking. (When the settings have correctly made, it changes to orange lighting.) The status...
Page 15
15 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM THE SYSTEM SETTING DETAILS The basic setting procedure When you have logged in to the system, the setting window appears. You can make the settings on this window. Make sure to refer to the on-screen instructions and comments displayed on each window when you make the settings. * Depending on the PC and its OS or environment, the display may differ.* The setting procedure Click a title in the table of contents on which you wish to make...
Page 16
16 Making network settings to each IP unit [Network setting: Individual] Make the settings for network to each IP unit connected to the system according to your requirements. Click 1 Network setting: Individual in the table of contents. Make the settings on the following items displayed in 2 the setting window. [Host unit setting]:• Set this unit as either “Host unit” or “Client unit”. When set to “Client unit”, also enter the IP address of the IP host unit. [System name]: • Required When “Host...
Page 17
17 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Setting the administrator ID and password [Administrator setting] We recommend that you change the administrator ID and password from default to unique ones for security purposes. This setting can be made to each of the IP units in your site. * “aiphone” is preset as the default for both ID and password.* Click 1 Administrator setting in the table of contents. Make the settings on the following items displayed in 2 the setting window....
Page 18
18 Registering areas and remote sites [System setting – Area/Site registration] Required Register areas (for separating stations in your site) and/ or remote sites. The number to which a name is entered is registered as an area or site number. Up to 99 areas and/or sites (up to 31 for sites only) can be registered. Click 1 Area/Site registration in the table of contents. Enter an area name in the cell for the area number 01.2 Be sure to enter an area name. A site cannot be * registered to the number...
Page 19
19 GETTING STARTED USING THE SYSTEM APPENDIX SETTING THE SYSTEM Registering IP units [System setting – IP unit registration] Register IP units by selecting from the connected ones to the system. To register a PC master station, fi rst install the application * (IS-SOFT) to a PC, then connect the PC to the network and then start IS-SOFT. Click 1 IP unit registration in the table of contents. Click 2 IP unit search. All the IP units connected to the system are displayed in the [Search result] on the...
Page 20
20 Registering stations [System setting – Registering stations] Register all the stations connected in the system, and set the area, station no. and station name to them. Click 1 Registering stations in the table of contents. Set the area, station no. and station name to the 2 target stations. Setting the station no. is required to register the * station to the system. For a cell with the * mark, select the target one from the pull-down menu. Do not set stations with the same number in an area. *...