Aiphone IS IP Network Direct Operation Manual

11
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
Communication
On a door station, you can call up to 20 preset master stations in your site at the same time. Or you can call up to19 master stations • in your site and a remote site (up to 20 master stations at the remote site).
On a master station, the communication method can be selected from the hands-free mode, the press-to-talk mode, or using the 
• handset.
(→P. 21)
You can also communicate with a remote site (the pilot station...

12
Paging
On a master station, you can initiate paging to the selected zone(s). All the stations previously registered to the zone(s) receive the 
paging. (→P. 35)
You can also call another master station or a door station in your site individually by direct voice call. The receiver can reply in the 
* 
hands-free mode.
You can also make paging to the pilot zone in a remote site.
* 
Monitoring
On a master station, you can monitor a door station in your site.
You can also initiate the scan-monitoring...

13
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
Call Electric door strike Master station
Door release Door station 
Door release
On a master station, you can unlock the door associated with a door station call in which a door release device is connected.
(→P. 26)
You can also unlock the door (door release device) connected to a door station in a remote site depending on the setting.
* 
OperationTarget
In your site
(network direct system)In a remote site
(network direct system)In a...

14
SETTING AND ADJUSTMENT
Make the basic and initial settings and adjustments on a master station after the system settings are completed. Make the settings 
and adjustments to all of the master stations individually.
NOTE: First change the display language for the monitor screen to the language you need. (
→ P. 15)
Setting items
You can make the settings and adjustments for the following items. We especially recommend you make all the settings of the items 
in [INITIAL SETTING] before the fi rst use of...

15
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
Setting the display language
When the master station is started up for the fi rst time, the 
[DISPLAY LANGUAGE] setting screen appears on the monitor. 
The display language for the monitor screen is set to English 
as default. First change it to the language you need as follows.
IS-IPMV
Press 1  repeatedly to select the target language 
(so that it is highlighted).
Press 2 ZOOM/WIDE to decide on the selected one.
Adjusting screen...

16
Initial settings [INITIAL SETTING]
Make the initial settings before beginning to use the master 
station. You can set the following items under [INITIAL 
SETTING].
■ [DOOR CALL TONE]
■  [ROOM SUB CALL TONE]
(Not available in a network direct  system)
■ [COMMUNICATION METHOD]
■ [DISPLAY]
■ [SPEED DIAL]
■ [TRANSFER]
■ [PRIVACY]
■ [INITIALIZATION]
Basic setting procedure
Press 1) SETTING in the standby mode.
The setting screen appears.
Press 
2)  
repeatedly to select [INITIAL SETTING] 
(so that it is...

17
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
B Setting the communication method for using 
the microphone and speaker [COMMUNICATION 
METHOD]
You can select the communication method for using the 
microphone and speaker between HF (hands-free) and PTT 
(press-to-talk).
Press 1  repeatedly to select [COMMUNICATION 
METHOD] (so that it is highlighted), and then press 
ZOOM/WIDE
 to select.
Press 2 ZOOM/WIDE, then press  repeatedly to 
select [HF] or [PTT] (so that it is highlighted),...

18
E Setting the call transferring [TRANSFER]
You can make the following settings for transferring calls.
Sub item Description Setting range
[CALL 
TRANSFER]Enables (ON) or disables (OFF) 
the call transferring.ON
OFF
[TRANSFER 
DESTINA]
(Transfer 
destination)(Available when [CALL 
TRANSFER] is set ON.)(Registering a 
master station or 
a remote site)
Selects a master station in your 
site or a remote site as the 
transfer target.
[TRANSFER 
DELAY](Available when [CALL 
TRANSFER] is set ON and the...

19
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
F Setting the PRIVACY function [PRIVACY]
Setting of the PRIVACY function is available when called from 
another master station. 
When the PRIVACY MODE is activated, the microphone turns 
off and you will not be heard by the caller.
Sub item Description Setting range
[PRIVACY MODE]Sets whether or not to 
activate the PRIVACY 
function. To activate 
the PRIVACY function, 
select the PRIVACY 
MODE 1 or 2.(PRIVACY MODE) 1: 
The microphone is...

20
RECEIVING AND ANSWERING A CALL ON THE MASTER STATION
The following describes the communication method using this system.
When receiving a call from a remote site, the operation methods are the same as described below, however it may take a longer 
* time for some operations and their responses. For example, there may be a time difference between a call starting at a remote site 
and the call tone ringing on the target master station in your site.
The term “a remote site” used in this manual means “a...