Aimco Brakes Freedom3 SPC Sqnet User Manual
Here you can view all the pages of manual Aimco Brakes Freedom3 SPC Sqnet User Manual. The Aimco Brakes manuals for Torque Measurement are available online for free. You can easily download all the documents as PDF.
Page 11
[email protected] 11 On-Line Production Tightening Freedom³ can be programmed to work as an assembly tool on production line communicating in real time with VPG software. Working on line, user can see on PC display the joint to tighten (or to check with quality control test),the correct sequence and the status of the joint. During tightening on pc display is shown the torque angle curve in real time. On-line production tightening is...
Page 12
12 LAB,SPC and PRW function table In Brief: LIST OF FUNCTIONS LAB SPC PRW Version and Memory: Working with all firmware version Yes Yes Yes Store data-results and curves in Freedom³ memory Yes Yes Yes Programming: Edit tests directly on Freedom³ Yes X X Route from/to SQ-Net X Yes Yes Receive program from VPG in real time X X Yes Send data and Curves to F3 Explorer Yes X X SPC Quality Control test Yes Yes Yes Production Tightening Yes Yes Yes Joint Analysis Yes X X Continuous...
Page 13
[email protected] 13 LAB, SPC and PRW function table In Brief: List of Functions LAB SPC PRW Options: Internal Bar Code Reader Yes Yes Yes Bluetooth Integrated Module X Yes Yes 868 MHz Integrated Module X Yes Yes WiFi Integrated Module X Yes Yes Automatic Socket Recognition X Yes Yes Rubber Protection Yes Yes Yes Rubber Protection with Display Protection Yes Yes Yes Single Battery Charger (External) Yes Yes Yes Dual Battery Charger (External) Yes Yes Yes...
Page 14
14 SYSTEM OVERVIEW In the following chapters we will show the main technical Characteristics of Freedom³ . Technical Specification Torque Capacity (Nm) Connection (end- Fitting) L1 (mm) L2 (mm) Weight (kg) 15 9x12 Female 375 393 0,8 30 9x12 Female 375 393 0,86 70 9x12 Female 480 498 0,93 100 9x12 Female 480 498 0,93 200 14x18 Female 604 629 1,5 300 14x18 Female 754 779 1,86 400 14x18 Female 854 879 2 600 14x18 Female 1032 1057 3,65 800 Ø 20 1250 1330 5,1 1000 Ø 20...
Page 15
[email protected] 15 Measurement accuracy: ±0.5% deviation between 20% and 100% of torque capacity ±1% deviation between 10% and 20% of torque capacity ±0.1°angle display deviation Performance: Internal Memory 1 GB. 20000 results; 20000 curves; 1000 Programs Settable. 2.8” Touch-Screen (for easy and fast navigation). High Resolution. Display 320 x 240 pixel, 65535 colors. Keyboard (for switching on/off and navigation). Barcode Reader (to add vin-number info to the...
Page 16
16 Connections Ports and Interfaces: Mini-B USB 2.0 (For SCS software and battery charger Connection) 4 Pin connector for battery charging by cradle (optional) Keyboard and touch screen for programming and navigation: 1 led green and 1 led red to indicate the status of the tightening or test:
Page 17
[email protected] 17 7 led blue to indicate the tightening progression: Software To allow users to download data or communicate with PC, we developed 3 software, F3 Explorer (for Lab version) and SQ-Net (for SPC version). VPG Visual Production Guide (for PRW version) The minimum system requirements to install and use SQ-Net, F3 Explorer or VPG are the following: CPU: Pentium II Hard Disk Space: 100 MB RAM: 128 MB Operating System: Windows 2000...
Page 18
18 Starting In the following paragraphs we will show how to start quickly to work with Freedom³. As explained above, there are different firmware versions available for Freedom³, in order to satisfy all customer needs. LAB: for all customer who needs to work locally with the possibility to send data results and curves to PC (by F3 Explorer software) . SPC: for all customer who needs to organize route (list of quality test or tightening program strategy) sent by SQ-net software organizing...
Page 19
[email protected] 19 SPC mode working with SQnet Introduction: SPC is a firmware version of Freedom³ that allows user to work in remote way, programming Freedom³ from SQnet software. In SPC mode is not possible to edit programs locally (only for Lab version). To program Freedom³ is necessary to install SQnet or SQnet FTA (only for PRW version) PC. In the next paragraphs we will show you how send/receive a route (list of test) from/to SQnet and how execute test. SQnet As...
Page 20
20 Build a tree structure and edit Location with SQnet Start SQ-Net and: Click on SQ-Net icon to run it Select “test definition” icon from main page of SQ-Net: In test definition window it’s possible to organize the job, setting all locations and tightening operations for every single joint. In fig.1 you can find an example: Click on test definition icon