Aimco Brakes Freedom3 PRW Sqnet User Manual

 
 
   [email protected]     
71  
STEP -5- 
A new window appears, click on orange arrow to collect data from Freedom³: 
 
    
    
 
   
 
 
On the right part of the window “Logs”, user can check the status of communication: 
 
 
 
   
When SQnet finishes to receive data, on last row of window “Logs” appears “Data reception 
completed”. 
 
 
 
  

 
72 
 
72 PRW mode working with SQnet FTA 
Statistic           
 
 
After sending data, it’s possible from the main window of SQ-Net see the statistic of the results 
sent from Freedom³: 
 
 
 
       
       
       
    
User has to select the row with location and test he wants to see, so he can click on statistic icon ( 
as shown in the figure) 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
 
   [email protected]     
73  
 
It will appear a new window: 
 
 
 
 
 
From this window is possible to see: 
filter test by date 
Show NOK test 
X/R Charts 
Statistic Control Chart 
Cm/Cp Chart 
Export To Excel 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
74 
 
74 PRW mode working with SQnet FTA 
Freedom³ PRW Setup Menu 
 
 
Freedom³ can be set in different way, for every single modality is necessary to set the wrench in a 
specific way. 
See below to know how to enter in the setup and to set the wrench to work by Bluetooth via “dll”. 
 
 
 
From main menu, select “setup” icon: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
A new window will appear: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Select again the “Setup” icon and type the password “1247” 
 
 
It will be appear  the...

 
 
   [email protected]     
75  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
In the table below are explained all setup items. The item in yellow are for PRW with Bluetooth via 
“dll” version. 
 
Setup Item Meaning 
Set version This item allows to select if the wrench must 
work with a special or default version.  
Language This item allows to choose one of the following 
languages: English; Italian; German; French; 
Portuguese; Spanish. 
Server/Client mode This item allows to configure if the wrench 
must be Client...

 
76 
 
76 PRW mode working with SQnet FTA 
Setup Item Meaning 
Net Id “Group” identifier for 868 MHY radio 
Node IT “Node” identifier for 868 M:z radio 
Master IT Only for SCS 
Radio Channel Only for SCS 
Radio Power Only for SCS 
Online PerioT Only for SCS 
Has Tool Recognition Enable this item only if the wrench has “socket 
tool recognition” installed on board. 
Tool selects Prog< Enable this item only if the “socket tool” selects 
the program. 
Password per Firmware If is enabled, the wrench will...

 
 
   [email protected]     
77  
Setup Item Meaning 
Light TimeOut  Freedom³  has 2 different light levels, one is 
standby and the other one is for work modality. 
By this item is possible to set how long the 
wrench waits before to switch from work to 
standby modality when it’s not receiving any 
input. The time is in seconds. 
PowerOff sec.(0=never) If the wrench is not used can switch off 
automatically. Select “0” to disable. The time is 
in second. 
All Misure in Window If this item is enable,...

 
78 
 
78 PRW mode working with SQnet FTA 
Setup Item Meaning 
Led green at Nom. If enabled, the wrench will light the green led 
when torque or angle target are reached. 
Vibration Enable vibration when target is reached. 
Input Vin If enabled, user must read the Vin number after 
program selection; user must read the Vin 
before program selection; User must read the 
vin when the radio communication is off 
(special system for IVECO)  
BarCode Use Enable only if on the wrench is installed 
barcode...

 
 
   [email protected]     
79  
 
Setup Item Meaning 
Conn. To Schatz Enable to connect Freedom³ with Schatz bench 
(bench for torque/angle calibration) 
Schatz baud Rs232 parameters for connection with Schatz 
bench. 
Fix Cable Port Only for SCS. Used for Freedom³ or EWW³ to 
select the port. 
Plug in Cable Port Only for Freedom³ first generation 
Cradle Input Only for Freedom³ with “R=D” sensor, to 
recognize when Freedom³ is positioned on 
cradle battery charger. 
Adapter Coeff. Mode This setting...

 
80 
 
80 PRW mode working with SQnet FTA 
 
Part Numbers 
 
 
Part Numbers Model Description 
113 16 0015 Freedom³ 15 Nm Torque-Angle Wrench 
113 16 0030 Freedom³ 30 Nm Torque-Angle Wrench 
113 16 0070 Freedom³ 70 Nm Torque-Angle Wrench 
113 16 0100 Freedom³ 100 Nm Torque-Angle Wrench 
113 16 0200 Freedom³ 200 Nm Torque-Angle Wrench 
113 16 0300 Freedom³ 300 Nm Torque-Angle Wrench 
113 16 0400 Freedom³ 400 Nm Torque-Angle Wrench 
113 16 0600 Freedom³ 600 Nm Torque-Angle Wrench 
113 16 0800 Freedom³ 800...