Aimco Brakes Freedom3 PRW Sqnet User Manual
Here you can view all the pages of manual Aimco Brakes Freedom3 PRW Sqnet User Manual. The Aimco Brakes manuals for Torque Measurement are available online for free. You can easily download all the documents as PDF.
Page 51
[email protected] 51 Select right “strategy” By SQnet FTA is also possible select which strategy Freedom³ has to apply during the execution of group considering customer needs. Count only ok results -> Selecting this strategy, Freedom³ will count to complete the test only “OK” results, that means if one test is composed of 3 screws, operator must get 3 ok test to complete it, “Not OK” results will be not archived and considered. In case of error redo the batch -> Selecting...
Page 52
52 52 PRW mode working with SQnet FTA On the right part of the window “Route Management” will appear the Group created : Name of the group and group number [1]
Page 53
[email protected] 53 Under title bar “Group list” there are 3 icons: ICON FUNCTION Edit New Group Modify an existing Group Delete a Group Note: it’s possible to edit more groups inside a route, To add Control Quality test or Tightening operation in a Group (Job), select the test or the operation before added in the route (see paragraph hoe to create a route). Route created previously Click on “plus” button to open the group
Page 54
54 54 PRW mode working with SQnet FTA Select one by one, test or operation to add to the Group (job) and press “right arrow” button to add to the group In the lower-right corner of the window is possible to: Select test or operation to add to the group Click on right arrow to add the selected test to the group Test already added to the group Modify Strategy for every single test or operation Define how many screws operator has to tighten or check for every...
Page 55
[email protected] 55 Phase nr. field will be activated only if the “strategy” selected for the test or operation is “=n case of error go to another phase”. The phase is the number linked to a test or operation, see below: The red highlighted ring is the associate number for test or operation (phase). When operator start a group (job) on Freedom³, first test to have will be the test indicates with number “1”. By “Up” and “Down” arrows is possible modify the...
Page 56
56 56 PRW mode working with SQnet FTA Once route and job\s are created is possible to send it to Freedom³, close the window “route management” and automatically SQnet will save the route and groups. See next paragraph for sending route to Freedom³.
Page 57
[email protected] 57 How to send a route to Freedom³ PRW STEP -1- Before to send a route to Freedom³ user has to connect USB cable STEP -2- Once USB cable is connected to computer and Freedom³, switch on Freedom³ and from the main page select “Synchronize” icon. USB CABLE
Page 58
58 58 PRW mode working with SQnet FTA STEP -3- A new window will appear, touch the button “USB/Radio” to start the synchronization: Subsequently user must confirm synchronization, pushing confirm button on Freedom³ keyboard:
Page 59
[email protected] 59 After selection, Freedom³ will start the synchronization modality: The wrench is waiting for communication with SQnet.
Page 60
60 60 PRW mode working with SQnet FTA STEP -4- On PC, in the SQ-Net main page, click on Freedom³ interface (PROD) icon: STEP -5- A new window appears: Select Route